HDWR Global H1000P Hook scale User Manual

HDWR Global H1000P Hook scale

Product Information

• Model: wagPRO-H1000P
• Capacity: 1 ton
• Features: Remote control operation, stable weight indicator, tare function

Product Usage Instructions

Safety Instructions:

1. Do not overload the scale.
2. Avoid leaving the load hanging on the scale hook for extended periods.
3. Regularly inspect the hook and screws for any damage.
4. Avoid using the scale during thunderstorms or in rainy conditions.
5. Hang the scale in a dry and well-ventilated area, not directly on the ground.
6. Do not attempt to repair the scale yourself; contact the supplier for assistance.

Operating Instructions:

1. To turn on the scale, press and hold the power button for 3 seconds.
2. If a non-zero value appears on the display, press the tare button to reset to zero.
3. To pause the screen with the displayed weight, use the HOLD UNIT button. Pressing again will unlock the screen.
4. Press and hold the unit button for 1 second to change between kilograms and pounds units.
5. Indicators: S – stable weight, Z – weight at 0, T – tare, H – locked screen, LB – pounds unit, KG – kilograms unit.

Operation via Remote Control:
Further details on operating the scale via remote control can be found in the specific remote control operation section of the manual.

FAQ:

Common Problems and Solutions:

• Problem: The scale does not start when the power button is turned on.
  • Possible Causes:
  • Dead battery
  • Broken power button
  • Broken power cord
  • Solution:
  • Check and charge the battery if discharged.
  • Press the power button harder for 2 seconds.
  • Inspect and check the power cord.

Specification

• Material: steel
• Maximum nominal load: 1000 kg
• Maximum permissible load: 100% of nominal load
• Maximum Safety Load: 120% of Nominal Load
• Display: Digital LCD
• Display Backlight: Blue
• Additional Functions: Pause Screen, Tare Scale, Swap Units
• Available weight units: kg, lb
• Battery type: Lithium-ion
• Power supply: mains, battery
• Battery capacity: 2400mAh
• Battery life: up to 4 days
• Standby time: up to 2 weeks
• Operating temperature: -10 – 40°C
• Operating humidity: up to 90% at 20°C
• Device dimensions: 26 x 14 x 5 cm
• Package dimensions: 27.5 x 18 x 10 cm
• Package weight: 1.3 kg

The set contains

• Hook scale PRO-H1000P
• Hook holder with robust safety latch and clamping pin
• AC adapter
• Remote control for scale control
• Manual

Features

• Solid steel construction for safety
• Can weigh products up to 1 tonne
• Remote control for convenience
• Ability to change units and measure in kilograms and pounds
• Clear LCD display with blue backlight
• 2400 mAh battery for up to 4 days of battery life

Taking care of the battery

To maximize battery life, follow these battery care rules.

1. The battery compartment can be opened by removing 2 screws.
2. Depending on the brightness of the backlight and the idle mode setting, the battery lasts more than 65 hours.
3. To save battery life, turn on auto power off and dim the backlight brightness when idle.
4. For maximum life, the battery should be stored between -20°C and +50°C.

Troubleshooting

Below are the most common problems and their solutions. If you don’t find a solution, contact your supplier.

Problem:
The scale does not start when the power button is turned on.

Possible causes:

1. Dead battery
2. Broken power button
3. Damaged power cord

Solution:

1. Check the battery and if it is discharged, charge it.
2. Press the power button harder and press for 2 seconds
3. Check the power cord

Safety Instructions

To ensure good performance and precise measurements, please follow the following safety rules during daily operation and maintenance.

1. Do not overload the scale. Doing so may damage the load cell and void the warranty.
2. Do not leave the load hanging on the scale hook for a long time. This can affect the accuracy of the balance and shorten the lifespan of the load cells.
3. Inspect the hook and the ratchet on it before use. Check the condition of the hook and screws regularly.
4. Do not use the scale during a thunderstorm, do not expose it to rain.
5. The scale should be hung in a dry and well-ventilated area. Do not place the scale directly on the ground.
6. Do not attempt to repair the scale yourself. If you have any problems, please contact your supplier.

Operating Instructions

1. To turn on the scale, hold the button for 3 seconds.
2. If a value other than 0.0 appears on the display, press the button to tap the device.
3. The device gives you the option to pause the screen with the currently displayed weight. To do this, use the button, and the letter H will appear at the bottom of the screen.
4. Pressing the HOLD UNIT key again will unlock the screen.
5. Holding down the key for 1 second allows you to change the current unit.
6. When the KG mark is visible on the screen, the kilograms are set. When the LB designation appears on the screen, the unit set is pounds.

Indicators

• S – informs about the stable weight of the product
• Z – informs about the weight with a value of 0
• T – informs about the taring of the device
• H – informs about the locked screen with the current value
• LB – indicates the unit set to pounds
• KG – informs about the unit set to kilograms

Operation via remote control

With the remote control included in the set, you can conveniently operate the scale from a distance.

• Key A – used to turn off the device
• B key – short press to stop the screen with the current value of the weighed product. Press for 3 seconds to change the unit.
• C key – tare the scale
• D key – change the backlight mode. It is possible to set the backlight to turn off automatically after a few seconds (d — AUT), turn off the backlight completely (d — OFF), and turn the backlight on all the time (d — ON).

hdwrglobal.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>