BRESSER 7004340 RC Weather Station Instruction Manual

: July 16, 2024
: BRESSER

Table of Contents

BRESSER 7004340 RC Weather Station
Specifications
FAQ)
Validity note
General Information
General Warnings
Parts Overview
Main Function Sensor
Time Setting
Alarm setting
Temperature alert setting
Technical data
EC Declaration of Conformity
DISPOSAL
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER 7004340 RC Weather Station

Specifications

Product Name: MeteoTemp TBV Radio Weather Station RC Weather Station
Art. No. : 7004340 7004380
Features:
- Week display in 7 languages
- Indoor humidity and temperature display
- Weather forecast
- Barometric pressure trend display
- Backlight function
Includes: MeteoTemp TBH RC Weather Station Sensor, 7009985 EU-UK Adapter, CR2032 Battery

FAQ)

How can I change the language on the weather station?
Refer to the user manual for instructions on changing the language settings.
What type of battery is required for the weather station?
The weather station uses a CR2032 battery for operation. Be sure to replace it when needed.
Can I access weather information in multiple languages?
The weather station supports weekly displays in seven languages for user convenience.
How often should I replace the batteries in thesensor?
Monitor the battery status regularly and replace it when the sensor shows low power to ensure continuous operation.

Validity note

This documentation is valid for the products with the following article numbers:

7004340, 7004380
Manual version: 0324
Manual designation:
Manual_7004340-7004380_MeteoTemp TBV RC Weather Station_de-en-fr-es-it-nl_BRESSER_v032024a
Always provide information when requesting service.

General Information

About this Instruction Manual These operating instructions are to be considered a component of the device.

Read the safety instructions and the instruction manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.

DANGER!
You will find this symbol before every section of text that deals with the risk of minor to severe injuries resulting from improper use

ATTENTION!
You will find this symbol in front of every section of text which deals with the risk of damage to property or the environment

General Warnings

DANGER!
This device contains electronic components which operate via a power source (power supply and/or batteries). Only use the device as described in the manual, or you run the risk of an electric shock. Keep batteries out of the reach of children! Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.

ATTENTION!

Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary. Do not expose the device to temperatures above 60°C.
Do not expose the device to high temperatures. Use only the supplied power supply or the recommended batteries. Do not short-circuit the device or batteries or throw them into a fire! Excessive heat or improper handling could trigger a short-circuit, a fire or
an explosion.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. The batteries should be removed from the unit if it has
not been used for a long time.

Scope of delivery

MeteoTemp TBH RC Weather Station

Sensor 7009985
EU-UK-Adapter
CR2032 Batterie

Parts Overview

7 languages week display
Indoor humidity
Indoor temperature
weather forecast
Time with DCF
Alarm with snooze
Calendar
Outdoor humidity
Channel
Outdoor temperature
Moon phase display
Barometer pressure history
Button
Button
Button
Button
Button
Button
DC hole
Hanging hole
attery cover
Button

Main Function Sensor

A. Temperature
B. Current channel
C. Humidity
D. LED INDICATOR
E. Wall Mount
F. Reset
G. Transmission channel (1-3)
H. Battery Compartment for 2x AAA

Setting up power supply Base device

Remove the battery compartment cover.
Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
Replace the battery compartment cover

Remote sensor

Remove the battery compartment cover.
Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
Set the channel selector switch to the desired channel.
NOTICE! This device can be operated with three remote sensors. Each remote sensor being connected must be operated on a different channel.
Replace the battery compartment cover.

Time Setting

Manual time setting

Press and hold the button for approx. 3 seconds to enter to the time setting mode.
Digits to be set are flashing.
Press or button to change the value.
Press the button to confirm and continue to the next setting.
Settings order: Week languages > RCC On/Off > Time zone > Year > DM/MD format > Month >\ Day > 12/24H format > Hour > Minute > Barometerunit > Barometer value.
Finally, press the button to save the settings and exit the settings mode. In normal mode, press and hold the button to enter the RCC receiving mode

Language:

Alarm setting

In normal mode, press the button to check the alarm time.
When checking the alarm time, press the button again to turn on or turn off the alarm.
When entering the alarm mode, press and hold the button for approx. 3 seconds to enter the alarm setting mode. Digits to be set are flashing. Press or button to change the value.
Press button to confirm and continue to the next setting.
Settings order: Hour > Minute > Snooze time. Finally, press the button to save the settings and exit the Alarm setting mode.
When the alarm rings, press the button to enter the snooze mode.

Max / Min temperature and humidity record

In normal mode, press the button to check the Max and Min temperature and humidity record.
When checking the Max/Min record, press and hold the button to clear the record.

Channel select

In normal mode, press the button to select Channel 1, Channel 2 , Channel 3 or cycle display.
Hold the button for approx. 3 seconds to reset values and search for an RF signal.
NOTICE! Always make sure the channel chosen on the display unit matches the channel option chosen on the outdoor sensor

Backlight ( Always powered by adapter)

When powering on the adapter, press the button to choose the backlight level. It has 4 levels of backlight. In normal mode:

Press and hold the button for approx. 3 seconds to enter the night mode.
Digits to be set are flashing
Press or button to change the value.
Press button to confirm and continue to the next setting.
Settings order: night mode on/off > Hour for night mode start time > Minute for night mode start time > Hour for night mode end time > Minute for night mode end time
Finally, press the MODE button to save the settings and exit the settings mode

The backlight level for night mode will be Level 2, When turning on the night mode, the AUTO DIM 13. Temperature Alert

Temperature alert setting

In normal mode, Press the button to check the indoor and outdoor temperature alert. the symbol will display.
Settings order: Indoor high temperature > Indoor low temperature > Outdoor 1 high temperature > Outdoor 1 low temperature > Outdoor 2 high temperature > Outdoor 2 low temperature > Outdoor 3 high temperature > Outdoor 3 low temperature
When checking the temperature alert, Press and hold the button for approx. 3 seconds to enter the temperature alert setting.
Press the or button to set the tem-perature. Press the button to confirm and continue to the next setting.
Settings order: temperature alert ON/OFF> high-temperature alert value > low tempera-ture alert value.
Only the temperature alert is ON then can set the temperature alert value
5. When an alert is triggered, press the ALERT button to stop the alert.

Weather Forecast

This device forecasts the next 12-24 hours of weather within a 30-50 km (19-31 mile) radius with a 75% accuracy.

Moon Phase
The phase of the moon depends on the current date. It is automatically calculated and the fol-lowing symbols are displayed:

Barometer
Record and display the changing trend in a chart based on the air pressure history in the past 24 hours. The horizontal data is the 7 time periods in the past 24 hours (-24, -18h, -12h, -9h, -6h, -3h, 0h), and the vertical data is the air pressure change value (the value is 0 by default when the power plugged in, each grid above or below represents 2hPa). Taking the air pressure value of the current period as the reference point, through comparison and calculation, we can determine whether the air pressure in the past 6 time periods has increased or decreased. (It is flat when it is just powered on.)

Technical data

Main unit
DCF
Batteries: 1x CR2032 Battery
EU-UK adapter incl
- Temperature measuring unit: °C / °F Temperature
- display range: -9.9°C – 50°C Humidity
- display range: RH 20% – 95%
Outdoor sensor
- Batteries: 2x AAA Battery
- Temperature measuring unit: °C / °F Temperature
- display range: -40°C – 70°C Humidity
- display range: RH 20% – 95%

EC Declaration of Conformity

Bresser GmbH hereby declares that the radio equipment type with item number 7004340 is in compliance with Directive 2014/53/EU. The full text of the EC Declaration of Conformity is available at the following web address:

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

Under the regulations concerning batteries and rechargeable batteries, disposing of them in normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive.

Warranty

The regular warranty period is 2 years and starts on the day of purchase. To benefit from an exten-ded voluntary warranty period as indicated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our
services at www.bresser.de/warranty_terms.

WARRANTY

www.bresser.de/warranty_terms

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/P7004340

www.bresser.de/P7004380