SAFEWAZE SW-9012 Bracket User Guide
- July 15, 2024
- SAFEWAZE
Table of Contents
SAFEWAZE SW-9012 Bracket
Specifications
- Product: SW-9012 Bracket
- Related Products: SW-9012
- Related Standards: ANSI Z359.12
- Date: 3-19-2024
- Revision: 1
Product Usage Instructions
- Hold the bracket with the knob facing the user and the U-shaped portion in a downward orientation.
- Pull the knob outward and turn it in a clockwise direction to release the bracket pin. Slide the bracket open.
- Install 1 or 2 SRL-Ps onto the bracket with swivels hanging on the U-shaped portion.
- Slide the bracket pin through the webbing loops at the dorsal D-ring of the harness or through the SRL channel if available. Ensure the red indicator is not visible.
- Check the locking function by attempting to slide the bracket open without pulling and turning the knob. The bracket pin should not move, indicating proper locking.
- Subject : SW-9012 Bracket Update
- Related Products: SW-9012
- Related Standards: ANSI Z359.12
- Date: 3-19-2024
- Revision: 1
MODELS
An update to the SW-9012 Bracket may change its installation instructions
depending on which version the user receives. Refer to the product manual for
the installation instructions for the original bracket (Image 1).
The user must read and follow the following installation instructions when
installing the updated SW-9012 bracket to a harness (Image 2):
- Hold the bracket with the knob facing the user and the U-shaped portion in a downward orientation.
- Pull the knob outward and turn it in a clockwise direction to release the bracket pin. When the bracket pin is released, slide the bracket open.
- With the bracket open, install 1 or 2 SRL-Ps onto the bracket. Swivel(s) should be hanging on the U-shaped portion of the bracket.
- Slide the bracket pin through the webbing loops at the dorsal D-ring of the harness, or the SRL channel if the harness is equipped with one until the bracket pin locks back into place. Ensure the red indicator is not visible. If visible, the bracket is not fully secured.
- Check the locking function of the bracket by attempting to slide the bracket open WITHOUT pulling and turning the knob. The bracket pin should not move and the bracket is now locked into place.
If you have any questions regarding the information in this Technical
Bulletin, please contact Customer Service at
800-230-0319.
Refer to the Safewaze manual provided with the product, or available online,
for proper use and additional installation information.
OVERVIEW
INSTALLATION
MORE INFORMATION
225 Wilshire Avenue SW, Concord, NC 28025 •
800-230-0319 •
safewaze.com
DOC #: 00242 • Date: 05/04/2023 • Owner: PD •
ISO #: F00064 • Rev: A
FAQ
- Q: What should I do if I encounter difficulties during the installation of the updated SW-9012 Bracket?
- A: If you face any challenges during installation, please refer to the product manual provided with the bracket. You can also contact Customer Service at 800-230-0319 for assistance.
- Q: Can I use the SW-9012 Bracket with other harness models?
- A: The SW-9012 Bracket is designed for use with specific harness models. Refer to the Safewaze manual for compatibility information.
- Q: How do I know if the bracket is securely locked in place?
- A: Ensure that the red indicator is not visible after locking the bracket in place. Attempt to slide the bracket open without turning the knob; if the bracket pin does not move, it is securely locked.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>