V-TAC VT Series LED Waterproof Lamp Fitting Instruction Manual
- July 14, 2024
- V TAC
Table of Contents
WEEE Number. 80133970
INSTRUCTION MANUAL
LED WATERPROOF LAMP FITTING
TECHNICAL DATA
MODEL | VT-6076S | VT-1249S | VT-1574S |
---|---|---|---|
SKU | 2162821, 2162831 | 2162841, 2162851 | 2162861, 2162871 |
WATTS | 18W | 36W | 48W |
LUMENS | 2160 Lm | 4320 Lm | 5760 Lm |
BEAM ANGLE | 120° | 120° | 120° |
DF | ≥0.7 | ≥0.9 | ≥0.9 |
CRI | ≥80 | ≥80 | ≥80 |
INPUT POWER | AC:200-240, 50/60Hz | AC:200-240, 50/60Hz | AC:200-240, 50/60Hz |
LIFE SPAN | 25,000 Hours | 25,000 Hours | 25,000 Hours |
ON/OFF CYCLE | >15,000 Times | >15,000 Times | >15,000 Times |
MAX CONNECTABLE UNITS | 16 | 8 | 6 |
DRIVER MA (Input Current) | 100mA | 200mA | 265mA |
OPERATING TEMEPERATURE | -20°C to 40°C | -20°C to 40°C | -20°C to 40°C |
MATERIAL | PC | PC | PC |
DIMENSION | 600x66x58mm | 1200x66x58mm | 1500x66x58mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Terminal block not included. To be connected with Waterproof Cable Hose
- For indoor use and outdoor use.
Non-replaceable light source
Non-replaceable control gear
INSTALLATION INSTRUCTION
-
Switch OFF the power before starting the installation.
-
Fasten the two mounting clips to installation surface.
-
Open end cap and take out the connector (FIG 1).
-
Link to power source (FIG 2).
-
Cover back end cap
-
Install the lamp to the mounting clips (FIG 3).
-
Hanging installation type reference (FIG 4).
-
Switch ON the power to test the light.
-
END CAP
-
POWER CORD
-
MOUNTING CLIP
-
HANGING CORD
-
HANGING CLIP
-
MOUNTING CLIP
LINKABLE CONNECTION
- POWER CORD
- MOUNTING CLIP
- END CAP
- WIRING DIAGRAM