POTTER AE-2 Accessory Expansion Enclosure Instruction Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER AE-2 Accessory Expansion Enclosure
NOTICE TO THE INSTALLER
This manual provides an overview and the installation instructions for the
AE-2 Accessory Enclosure.
Description
The AE-2 accommodates up to 2 standard size stacker bracket cards. The enclosure size is (WxHxD) 9 3/4″ x 8″ x 2 1/2″.
Technical Specifications
| Total Expansion Card Capacity | 2 |
|---|---|
| Size | 9 3/4″ L x 8″ W x 2 1/2″ D |
Installation
Secure the AE-2 enclosure to a suitable surface using #8 sized screws located in four of the five mounting holes provided. One expansion device can be installed in the location shown using the #6-32 sized hex nuts. An additional expander can be stacked on top of the one that is directly attached to the back box.
Figure 1. Example of Installing an AE-2
These instructions do not purport to cover all the details or variations in
the equipment described, nor provide for every possible contingency to be met
in connection with installation, operation and maintenance.
Specifications subject to change without prior notification.
For Technical Assistance contact Potter Electric Signal Company at
866-956-1211.
Actual performance is based on proper application of the product by a
qualified professional.
Should further information be desired or should particular problems arise,
which are not covered sufficiently for the purchaser’s purpose, the matter
should be referred to a distributor in your region.
References
- Fire Alarm Resources | Download fire alarm documents
- Potter Electric: Fire Alarms & Fire Sprinkler Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>