OKIN REFINED OCB010 Control Box Instruction Manual

OKIN REFINED OCB010 Control Box

Specifications

• Model: OCB010
• Version : 1.0
• Power Supply: 29V DC
• Motor Ports : 2
• LED Indicators: Power LED (green), Pairing LED (blue)

Product Usage Instructions

Operating Instructions

• The OCB010 control box will automatically exit from the pairing state, indicated by the LED turning green.

Motor Port

• Connect the two motors to the designated motor ports on the OCB010.

Power LED & LED Pairing

• The Power LED indicates the power supply status with a green light, while the Pairing LED shows the pairing status with a blue light.

Power Connection

• Ensure to connect the OCB010 to a 29V DC power source for proper operation 

Pair Button

• To initiate pairing, double-press the Pair Button on the control box.

FAQ

• Q: What should I do if the indicator lights do not function as described?
• A : If the indicator lights do not display the expected colors or behaviors, please check the power connection and ensure the correct voltage is supplied to the OCB010.
• Q : How can I troubleshoot pairing issues with the OCB010?
• A : If you encounter pairing problems, try resetting the control box by disconnecting and reconnecting the power supply before attempting to pair again.

Dimension drawing

Operating instructions

1. Press the up key, the product turned up to the horizontal position;
2. Press the down key, the product turns down to the maximum angle;
3. Press the left key, and the product left turn to the maximum angle;
4. Press the right key, and the product right turn to the maximum angle;
5. MEMORY key, long press 5 seconds at the same time to save the current flip angle and rotation angle, the buzzer sounded when saved successfully; short press the key to reach the saved flip and rotation angle.
6. HOME key: short press to reach the horizontal angle and rotate the 0-degree position; long press the HOME key for 10 seconds, the system automatically reset, reset after returning to the 0-degree position.
7. SET Key. long press the SET key for 10 seconds, change the mode between automatic mode and manual mode;
8. in any automatic operation process, short-pressing any key can make the product stop in the current position
9. remote control pairing operation: in the control box just power on within 10 seconds or double-press the button on the control box within 500ms to going to pairing mode, the control box indicator blue light, while long‐pressing the remote control on the Up+Down key 3 seconds after the key light blinks, the control box will emit a “beep” after successful code pairing, and the indicator light of the control box will turn green; if the pairing is not completed within 10 seconds after the control box enters the pairing state, the control box will automatically exit from the pairing state, and the indicator light will turn green

Motor port

• Connect with the two motors.

Power LED & PAIRING LED

• Power supply for control box, PAIRING LED of the control box is blue, the POWER LED is green。

Power

• Connect to the 29V DC;

Pair button

• Double press the button.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC RSS warning
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

ISED RSS Warning:
This device complies with the Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>