M-vave IR Box Pedal User Manual

M-vave IR Box Pedal

Preface

Thank you for buying our product. IR BOX is a box simulator and IR loader based on pulse response (Impulse Response) technology.

With it, you can immediately get the highly restored various classic speaker box sound. Connect official computer software or mobile APP, support loading third-party IR files, support bass speaker box simulation, guitar speaker box, folk guitar body simulation, etc. Computer software and mobile phone APP are equipped with professional 9-segment EQ, flexible frequency point and maximum ‡ 12dB adjustment range, carefully adjust the sound texture of IR files. We try our best to provide you with this high quality effector, I hope you can like it!

Matters Need Attention

Power supply:

Please use the correct power adapter with a positive 9V powersupply (9V1A or 5V1A is recommended), otherwise it may cause equipment damage! Unplug the power supply without using the equipment or during a thunderstorm.

linkage:

• Turn off other related devices before connecting to or disconnecting them.

Electrical interference:

• Electromagnetic waves such as radio and TV may interfere with the use of equipment, so try to stay away from equipment such as radio and TV.

Place of placement:

To prevent damage from deformation, discoloration and other aspects, avoid the following:

• Heat source
• Magnetic field
• Direct sunlight
• High temperature and damp
• Dust or undean places
• Strong strongly or shake

Product Features

1. Simple, high-end design.
2. The factory is equipped with 32 presets, each preset has IR
3. The product has 25 kinds of classic electric guitar box simulation presets (01-25 preset), 7 kinds of classic electric bass box simulation presets, a total of 32 presets (26-32 preset), which are suitable for most music styles and music scenes.
4. High-performance digital signal processing, signal-to-noise ratio of 103dB, 44,100 hz 24bit sampling rate, let you get high-quality sound
5. The attached USB cable can be connected to the computer for modulation.
6. Less than 1.5ms delay, restore the ultimate touch.
7. Users can use our APP or computer software to customize and replace IR files in the IR module.Support 44100hz, 24bit sampling rate, 1024/2048 sampling points IR files.
8. The official computer software and mobile phone APP are equipped with a professional 9-segment EQ module, flexible frequency point 30 HZ-18 KHZ and a maximum + 12dB adjustment range, after the adjustment can be saved in the host preset with one key.
9. In factory default mode, IR module is on, EQ module is closed, and EQ module is used to manually turn on.
10. When the IR module is closed, the EQ module can be used independently.
11. Users can import/export presets with one click using official computer software.

Attention: Access to the software needs to adjust the volume of the IR module (0-100), and enter the computer software to restore the factory settings.

1. Power interface: Use 9V1A DC transformer (Positive inside and negative outside).
2. USB interface: Support 5V power supply, it is recommended to use the 5V 1A adapter.
3. Headphone port: Support the use of 3.5mm headset.
4. LOW CUT knob: Adjust the frequency point of the global low frequency shear, adjust the whole 32 preset output timbre. The shear range is 20 HZ-360 HZ (Turn the knob counterclockwise to the end of 20HZ, that is, the low frequency below 20HZ is cut. Turn the knob clockwise to the end of 360HZ, that is, the low frequency below 360HZ is cut out.)
5. HI CUT knob: Adjust the frequency point of the global high-frequency shear, adjust the whole 32 preset output timbre. The shear range is 18 kHZ-1 kHZ (Turn the knob counterclockwise to the end of 18kHZ, that is, high frequencies above 18kHZ are cut. Turn the knob clockwise to the end of 1kHZ, that is, high frequencies above 1kHZ are cut.)
6. VOL knob: Adjust the total output volume of IR BOX, and the external audio volume through USB input is uncontrollable.
7. Left button: Select the preset forward. Press the left and right button to enter the BYPASS state.
8. Right button: Select the preset backward. Press the left and right button to enter the BYPASS state.
9. Display screen: Display the number of the current preset (01-32) or the BYPASS status (bp is displayed on the screen).
10. Input interface: 1/4 ” mono audio input interface.
11. Output interface: 1/4 ” mono audio output interface.
12. Balance output interface: XLRbalance Kanon output interface.

Preset Introduction

Attention: In the factory state, all the presets only open the IR module, and the EQ module is not open by default. If the user needs to open and save the EQ parameter to the machine, please enter the APP or connect the computer for operation.

This product supports independent use of the EQ module when the IR module is turned off.

Software Support

• Software support:
  • CubeSuite for Android/iOS: Scan the QR code
• Computer connection method: Use USB cable to connect the computer, you can connect the computer software CUBESUITE for operation.
• Mobile APP connection method: Search and use CUBESUITE for download and install. After entering the software interface, click “Scan nearby device”, select “IR-BOX”, and click “Pair”, which can be used after successful loading.

Attention: Only support BT wireless control APP, do not support BT audio transmission.

Technical Parameters

We will continue to improve our products and reserve the right to modify certain functions and specifications (including but not limited to appearance, packaging design, operation manual, accessories, dimensions, specifications, displays, etc.) without further notice.

Please confirm the product functions and specifications with the local distributor before the purchase. Product pictures and color due to the light error and screen admiration setting.
It may be different from the physical product effect. Please refer to the physical object accordingly.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>