ORIGINAL GARAGE MOTO OG M8 Softail Pull Back Plate Installation Guide
- July 15, 2024
- ORIGINAL GARAGE MOTO
Table of Contents
ORIGINAL GARAGE MOTO OG M8 Softail Pull Back Plate
Please refer to your bike service manual for additional guidance.
Disassembly
- Disconnect the riser assembly from the top triple tree (fork clamp).
- b. We strongly recommend discarding the OEM riser hardware and using our replacement riser hardware kit (H-AC-12-YZ).
- For extra caution, consider removing the gas tank to avoid any damage.
- Place the riser assembly on a blanket atop the gas tank.
Installation
- Install the OG M8 Softail Pull back plate as indicated in the schematic on the following page.
- The pull-back plate bushings should be installed beneath the OEM Top Tree.
- Torque the pull-back plate bolt to 45 ft-lbs.
- Install the riser assembly using your preferred style of bushing*.
- Ensure that the front end rotates freely and that the clutch is operating correctly.**
- If you are using polyurethane bushings, you must re-use the 4x OEM bushing cups and inner sleeve.
Note: For OEM risers & bar setup, we recommend using a +2” clutch cable. The connector caddy (12) located in the frame under the protective boot (13) (front left of the bike) can also be removed to provide more slack to the control harness.
Solid riser bushing displayed. If you are using polyurethane bushings, you must re-use the 4x OEM bushing cups and inner sleeve
Specifications
- Product Name: OG M8 Softail Pull Back Plate
- Model : H-AC-12-YZ
- Torque : 45 ft-lbs
- Compatibility: Softail bikes
FAQ
Q: Do I need any special tools for installation?
A: The installation requires basic tools such as wrenches and sockets.
Refer to your bike service manual for specific tools needed.
Q: Can I install this product on a different bike model?
A: This product is designed for Softail bikes, and we recommend using it
only on compatible models for optimal performance.
Q: What should I do if I encounter issues during installation?
A: If you face any difficulties during installation, please contact us at
info@originalgaragemoto.com for
assistance and guidance.