SPINNAKER Boettger Automatic Watch Instruction Manual

SPINNAKER Boettger Automatic Watch

Specifications:

• Movement: Self-winding Mechanical Automatic
• Power Source: Kinetic energy from the user’s wrist motion
• Water Resistance: Yes
• Additional Feature: Manual winding mechanism
• Manufacturer Website: spinnaker-watches.com

Product Usage Instructions

Using the Screw-Down Crown:

1. Do NOT pull the crown unless it is UNSCREWED first:
2. TO UNSCREW: Turn the crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the desired positions for the watch setting.
3. TO SCREW: Push the crown ALL THE WAY IN towards the watch and then begin to turn clockwise until it is securely screwed down.

Winding the Mainspring:

Unscrew the crown by turning it anti-clockwise.

1. When in position [1], turn the crown clockwise to the wind. Wind 15-20 times, and it will start to move naturally after shaking slightly.
2. Push the crown in and then screw it securely.
3. This watch MUST be worn for at least 8 hours each day to ensure it is fully wound.

How to Set the Time:

1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in and then screw it securely.

• Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.

Frequently Asked Questions

• Q: How often should I manually wind the mainspring?
  • A: It is recommended to manually wind the mainspring before initial use and if the watch has not been worn for a period of time to ensure proper functioning.
• Q: How can I tell if my watch is fully wound?
  • A: An automatic watch is fully wound when worn for at least 8 hours each day, ensuring that the watch functions properly through wrist motion.

AUTOMATIC

• This timepiece is equipped with a self-winding Mechanical
• Automatic movement.
• It does not need a battery.
• It is powered by the motions of the user’s own wrist during the wear of the watch.
• You may also choose to wind the watch manually.

For more information

Product Overview

PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN

Screw-down Crown

Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down (Position [0] is secured. Positions [1], [2], and [3] are not secured for water resistance ). Do NOT unscrew your crown while you are in any environment where moisture is present

USING THE SCREW-DOWN CROWN

Do NOT pull the crown unless it is UNSCREWED first:

• TO UNSCREW: Turn the\ crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the other desired positions for the watch setting (see specific operating instructions on the\ following pages).
• TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down

NOTE: Failure to SECURELY screw down the crown after setting the watch may affect its water resistance

Before you use this watch,\ It is recommended that you manually wind the mainspring to start it moving.

THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM

WINDING THE MAINSPRING

1. Unscrew the crown by turning it anti-clockwise.
2. When it is in position [1], turn the crown clockwise to the wind.\ Wind 15-20 times and it will start to move naturally after shaking slightly.
3. Push the crown in then screw it securely.

This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound

IMPORTANT NOTE

1. If your watch is running smoothly, please do not wind the crown to avoid \overwinding the movement. Provided you are wearing the watch frequently, your watch should have sufficient power to operate without any fuss.
2. If your watch has stopped running after a period of not wearing the watch, gently move the watch side to side 20 to 30 times to move the rotor or gently turn the crown 5 to 10 times to get the second-hand run at its normal speed

HOW TO SET THE TIME

1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
   • Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
   • Always be certain that your crown is SECURELY SCREWED; this will prevent moisture from entering in.

HOW TO SET THE DATE

1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown clockwise to set the correct date.
3. Push the crown in then screw it securely.

Do not set the date between 9:00 P.M. and 4:00 A.M.

WATER RESISTANCE

• Note that the water resistance chart serves only as a guide (please refer to the water resistance chart on the next page). Actual water resistance may vary depending on a\ number of factors including water temperature,\ water salinity and use under water.
• The water resistance of your timepiece may eventually be compromised over time with general wear and tear and use of your timepiece under adverse conditions.
• Always remember to employ the screw-down crown if available to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
• Note that you should NEVER wear your\ watch in a jacuzzi, hot shower or steam room\ where steam may enter the case despite the\ watertight seals used to protect your watch.
• This may cause condensation inside your watch, which may affect and damage the inner workings of your watch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>