KOHLER K-T9540-4 Transfer Valve Trim Owner’s Manual
- July 12, 2024
- Kohler
Table of Contents
KOHLER K-T9540-4 Transfer Valve Trim
Specifications
-
Material: Not specified
-
Required Products/Accessories:
- K-408-K Bath-mount Transfer Valve or K-409-K Deck-mount
Transfer Valve
- K-408-K Bath-mount Transfer Valve or K-409-K Deck-mount
-
Recommended Products/Accessories:
- K-23723 Faucet cleaner
- Transfer Valve Trim K-T9540-4
-
Codes/Standards:
- ASME A112.18.1/CSA B125.1 ADA ICC/ANSI A117.1 CSA B651 OBC
IAPMO Certification
- ASME A112.18.1/CSA B125.1 ADA ICC/ANSI A117.1 CSA B651 OBC
-
Available Colors/Finishes: Not specified
Product Usage Instructions
Installation
- Install the product according to the provided installation instructions.
- Ensure bath and hand shower outlets are available for a two-way transfer valve.
- Ensure bath, hand shower, and auxiliary outlets are available for a three-way transfer valve.
- If used as a two-way transfer valve, cap the auxiliary outlet. Do not install spouts with flow restrictors or shower units on the bath outlet.
- For installation on cast iron baths, install the collar with the flange facing downward. The opening in the cast iron must be at least 1-7/8 inches in diameter.
Compliance
The product is ADA, OBC, and CSA B651 compliant when installed according to the specific requirements of these regulations.
FAQ
- Q: What should I do if I have a two-way transfer valve but no auxiliary outlet?
- A: If you have a two-way transfer valve but no auxiliary outlet, make sure to cap the auxiliary outlet to prevent any issues.
- Q: Can I install spouts with flow restrictors on the bath outlet?
- A: It is not recommended to install spouts with flow restrictors or shower units on the bath outlet when using the product as a two-way transfer valve.
Features
- Available with lever handle
- Bath-mount or deck-mount installation options
Material
- Brass
- KOHLER® finishes resist corrosion and tarnishing
Required Products/Accessories
-
K-408-K Bath-mount Transfer Valve
or -
K-409-K Deck-mount Transfer Valve
Recommended Products/Accessories
- K-23723 Faucet cleaner
ADA /CSA B651 /ОВС
Codes/Standards
- ASME A112.18.1/CSA B125.1
- ADA
- ICC/ANSI A117.1
- CSA B651
- OBC
- IAPMO Certification
KOHLER® Faucet Lifetime Limited Warranty
See the website for detailed warranty information.
Available Colors/Finishes
Color tiles are intended for reference only.
Dimension
Technical Information
All product dimensions are nominal
Notes
- Install this product according to the installation instructions.
- Bath and hand shower outlets are required for two-way transfer valves.
- Bath, hand shower, and auxiliary outlets required for three-way transfer valve.
- When used as a two-way transfer valve (bath and hand shower), the installer must cap the auxiliary outlet. Do not install spouts with flow restrictors or shower units on the bath outlet.
- For installation on cast iron baths, the collar should be installed with a flange facing downward.
- Opening in cast iron must be 1-7/8” D. minimum.
- ADA, OBC, and CSA B651 compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-10-2024 21:24 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>