Haidilao Desktops Airborne Wireless Charger Owner’s Manual
- July 12, 2024
- Haidilao
Table of Contents
- Product Introduction
- Electrical Specification of Transmitting Terminal
- Enhancing Sticker
- Curve of Charging Process & Temperature Rise
- List of Compatibility Test
- List of FOD Test
- Installation Instructions
- RF exposure considerations
- FCC Warning
- IC Warning
- Tips
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Haidilao Desktops Airborne Wireless Charger
Product Introduction
Magnetic resonance wireless charging transmitter
Enhancing Sticker
This product is a wireless charging transmitter which is compatible with Qi. New designs are added to the coil of standard Qi transmitter by adopting proprietary long-distance coil and making adjustments to the control strategy. Compared with the traditional A11 coil with 8mm charging distance, this product can achieve vertical shift at a range of 18mm-35mm with a single coil, which enables it to adapt to the needs of various situations.
Electrical Specification of Transmitting Terminal
| Project | Specification |
|---|---|
| Product Model | U280-Q01FL-UD |
| Dimension | 106mm 106mm 20mm |
| Net Weight | 190g |
| Material | ABS |
| Work Temperature | 0-45℃ |
| Wireless charging standard | Compatible with Qi-BPP / SFC |
| Input | 24V-29V / 1A |
| Output Power | 10W |
| Effective charging distance | 18-35mm |
| Range of horizontal shift | φ20mm |
| Working frequency | 115-205kHZ |
| Standby power loss | <1W |
| Protection | FOD, OTP, OVP, etc |
| Product certificate | CE, FCC, PSE, RoHS |
Enhancing Sticker
Specifications of enhancing sticker
Size: 10cm diameter
Thickness: 0.35mm
Material: Copper Cable
Curve of Charging Process & Temperature Rise
Charging Capacity and Temperature Changes
Charging process and Temperature changes
Experimental phone : iPhone X
Experimental distance ：30mm
List of Compatibility Test
Phone Model
| Compatibility
---|---
iPhone 8| Samsung S6| Huawei Mate Rs|
√
iPhone 8P| Samsung S7| Huawei Mate 20 Rs|
√
iPhone X| Samsung S8| Huawei Mate 10Pro|
√
iPhone 10| Samsung S9| Huawei Mate 20Pro|
√
iPhone 11| Samsung S10| Huawei 30|
√
iPhone 11Pro| Samsung S20| Huawei Mate 30Pro|
√
iPhone 12/13| Samsung note10| Huawei Mate30e Pro|
√
iPhone 12/13 Pro| Samsung note20| Huawei P40|
Wireless charging patch A|
√
Wireless charging patch B|
√
Wireless charging patch C|
√
List of FOD Test
Receiver
|
Powering FOD
|
Working FOD
---|---|---
Sumsung S7|
√
|
√
Sumsung S10|
√
|
√
Sumsung Note8|
√
|
√
iPhone 8|
√
|
√
iPhone X|
√
|
√
Huawei Mate20 pro|
√
|
√
Wireless charging patch|
√
|
√
Installation Instructions
Install the device under the desktop.
The thickness of the table should be more than 15mm and less than 35mm.
After aligning the position of the sticker, attach the magnetic sheet and the table sticker in sequence.
Place the phone in the center of the table sticker to charge.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Warning
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Tips
The vertical distance should be no less than 15mm.
Do not put metal material like credit cards, ID cards, etc. on the device.
- Do not put cell phones directly on the transmitter.
- Vertical distance should be longer than 15 mm.
- Do not put the metal objects such as credit cards and ID cards between the charger and the charging phone.
Customer Support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>