NEONTEK 9.7, 10.1, 15.6 Inch Smart Home Control Panel User Manual

9.7″ 10.1″ 15.6″

Smart Home Control Panel

User Manual

Important Notices

Copyright Information
All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use.
All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders.

1. Do not push objects into holes and ventilation slots.
   Do not expose this product to moisture or place any objects filed with liquids on or near the product.
   Do not place a naked flame souce, such as lighted candles, on or near this product.
   Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. Do not intentionally hit the device or place heavy or sharp objects on the device.
   Only use accessories specified by the manufacturer.
   Keep the device away from benzene, diluents, and other chemicals.
   Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs.

Package Contents

Please make sure all of the following are present when you unpack your

Smart Home Control Panel

Smart Home Control Panel

Power adapter                               User manual

Hardware wall hanging            Install accessories

a) 3PCS (PM4.0.20MM)

Features

• 9.7″LCD panel resolution 2048*1536, 10.1″LCD panel resolution 1280×800, 15.6″LCD panel resolution 1920×1080
• RK3566 Quad core cortex A55
• RAM 2GB (Optional 4GB)
• Internal memory 32GB (Optional 64GB)
• Android 13
• 10-Point capacitive touch
• 5MP from a conventional perspective
• 802.11a/b/g/n/ac/ax (WiFi 6 and WiFi 6E)
• Matter protocol
• Zigbee protocol
• Bluetooth 5.3
• Ethernet interface (POE function standard IEEE802.3at,POE+,class 425.5W)
• Relay port (Control home devices that support relay connections)
• 485 232 serial port
• IR port
• I/O port
• Type-c
• Temperature sensor
• Microphone
• Installation aperture of 86 wire box: 60mm
• LED light strip
• Light sensor
• Adapter: 12V/1.5A(9.7″/10.1″),12V/2A(15.6″)

9.7″ Exterior Components

10.1″Exterior Components

15.6″Exterior Components

9.7″ Installation instructions for wall hanging

1                                                  2

2x KM4*8mm

3

10.1″/15.6″ Installation instructions for wall hanging

1                                                   2

2x KM4*8mm

3

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: `

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.

1） FCC regulations restrict the operation of this device to indoor use only.
2） The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet.
3） Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>