Hhcc Plant Technology HHCCJCY10 Flower Care Instructions
- June 6, 2024
- Hhcc Plant Technology
Table of Contents
Hhcc Plant Technology HHCCJCY10 Flower Care Instructions
Product Overview
Flower Care tracks light, temperature, soil moisture and soil nutrition in real time by connecting with the mobile phone, so as to provide you with intimate plant maintenance data and reference.
Product Appearance
Software Installation
The product has been connected to the “Smart Life” platforms. It can be
interconnected with other products through the Bluetooth Hubs.
Search “Smart Life” in the app store or scan the OR code on the outer package
or manual to download and install the app; For the initial usage, please click
the “register” button to create your account; If you have had an account, then
please click the “login” button.
To use the product
-
Open the back cover of the Flower Care, take out the insulation sheet inside the battery compartment, replace the cover.
-
Insert the Flower Care into flowerpot or garden soil. Water the soil if it is too dry before re-inserting.
-
Turn on Bluetooth of smart phone, click the + sign at the upper right corner in Smart Life Client and follow the hints to add Flower Care.(When the connection is successful, the light sensor will blink 2 times)
Note
Please keep the surface clean before inserting into
Please make sure at least 2/3of soil moisture sensor sectionbe inserted into
the soil
Please remove all obstructions to the light probe
Never immerse the sectionabove moisture sensors in water
Further notes
This product contains a battery
- Keep the battery out of the reach of children.
- Rain or water immersion will cause the product to malfunction.
- Do not heat, put heavy load on, destroy the battery pack.
- When the battery runs out or if the product is stored for long time, remove the batteries. When applicable, waste battery disposal should be according to local regulations.
- Replacement batteries need to meet the specification indicated in the manual.
Terms of Warranty
The after-sales service of products will be strictly in accordance with Three Guarantees as specified by Law of the People’s Republic of China on the Protection of Consumer Rights and Interests, and Product Quality Law of the People’s Republic of China with details as follows:
- Unconditional return within 7 days (Purchase via online retailer), while the user will bear transportation costs.
- For any of the product defects listed in Product Defect List, once verified, the following services are available free of charge.
| Service Type | Service Policy |
|---|---|
| Return | Return of product with quality problems within 7 days from Medal° of |
receipt of product
Exchange| Exchange of product with quality problems within 15 days from the
date of receipt of product
Repair| Repair of product with quality problems within 1 year from the date
of receipt of product
Product Defect List
Flower Care| Malfunction of Bluetooth of the product
Product sensor does not work
Warranty Exemption
- Unauthorized repair, misuse, collision, negligence. abuse, liquid ingression, accident, alteration, improper use of foreign parts or accessories. or torn, altered labels / false-proof seal:
- Out of Three Guarantees’ warranty period:
- Damages caused by force majeure;
- Those other than the defects listed in the Product Defect List;
- Any personal reasons that cause the product or accessory to exhibit defects listed in the Product Defect List.
Name and content of hazardous substances in the products
Item
Name| Hazardous Substances
---|---
Lead
( Ph)| Mercury
( Hg)| Cadmium
( Cd )| H
(cr(vi))| chromium ml leumnt Polybrom
mated bi(ppheestly)IS| Polybromina fed Biphenyl (eptaherisc )
White plastic case| 0| 0| 0| 0| 0| 0
Hard
plastic| 0| 0| 0| 0| 0| 0
Metal| 0| 0| 0| 0| 0| 0
PCB board| X| 0| 0| 0| 0| 0
This form is prepared in accordance wi h the provisions of SJ / T 11364.
0: Indicates that the amount of this toxic or hazardous substance in all
homogeneous materials under this item are below the limit required by GBT
26572 —2011 Requirement on Usage Limit of Restricted Substances in Electrical
and Electronic Products.
X : Indicates that the amount of this toxic or hazardous substance in at least
one homogeneous materials under this item are above the limit required by GBT
26572 — 2011 Requirement on Usage Limit of Restricted Substances in Electrical
and Electronic Products.
Product Model: HHCCJCV10
Applicable Standards: Q/CYHHC0003— 2017
Dimensions: 120-5 X 24-5 X12-5 mm
Bluetooth Version : 5.0
Power Source: 3V
Battery: CR2032 button battery
FCC ID: 20../ERHHCC.ICY10
Manufacturer: HHCC Plant Technology CO.. Ltd
Address: RM 626.6F, ZhCriggusieshilk 6-5-19 Chuang.
35 Xiaoyun Road. Chaoyang, Beijing. China
FCC WARNING
Thq equipment may gryierate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unirSS the mcdifications are expressly approved in the instructen manual. The user could lose the authority to operate this equipment if an isiauthcritedcharxie or modification is made.
This device complies with part 15 of the FCC Rules.Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
- The rating information is located at the bottom of the unit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>