X-MAKER JOY AOSEED 3D Printer User Guide
- July 12, 2024
- X-MAKER JOY
Table of Contents
X-MAKER JOY AOSEED 3D Printer
Packing List
App Download and Installation
- For Android Tablet/ iPad / Smartphones www.aoseed.com/pages/apps-downloads Or search “XMAKER” in Googleplay/App Store.
- For Windows PC www.aoseed.com/pages/apps-downloads
For Windows PC
www.aoseed.com/pages/apps-downloads
X- PRINT is 3D slicer software available only for Windows.
Connect 3D Printer
- Keep your hands dry. Take out the adapter and connect the power. Switch on the “Power Switch” .
- Open the X-MAKER App and select X-MAKER JOY.
- Long press the red “Reset Button” until you hear a beep. The indicator light will turn solid yellow.
- Enter the correct Wi-Fi password, then tap Connect (ensure the Wi-Fi frequency is 2.4GHz).
Connection Failed
- Ensure the printer and devices are connected to the same 2.4GHz Wi-Fi network.
- Restart the App or Printer, then try connecting again later.
How to Start
Install the Filament
- Remove the nozzle protective foam.
- Insert the holder into the placement hole, and put the filament spool on the holder.
- Push the orange handle upward a little, then insert the filament tip into the inlet untl the filament enters into the Extruder.
- Go to App > Printer Settings > Load. Click “Load”. Then the nozzle will be automatically heated. The filament will be loaded then and the loading completes until the filament comes out from the nozzle.
Cut the filament aslant and make it straightened.
Place the Base Plate
Ensure the base plate is clean & flat, and aligned with the platform.
Model Printing and Removal
- Easy-to-use one-click printing with the X-MAKER App.
- X-MAKER App > Things, one-click printing.
- X-MAKER App> Theme (or Design), DIY your own model to print.
Quick Swap Nozzle
Indicator Light
Notes
- AOSEED filaments are recommended. Do not frequently change filaments of various brands to avoid nozzle jamming.
- Please note that the app versions available for installation may vary on different platforms.
- Recommended ambient temperature for using the printer is 0-35 °C. Please turn off the printer when not in use.
- For more information, please visit www.aoseed.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>