AVIGILON SYS-4ENT-DVE1 4 Door Smart Hub User Guide

AVIGILON SYS-4ENT-DVE1 4 Door Smart Hub

Specifications:

• Model: SYS-4ENT-DVE1
• Included Items:
  • 4-Door Smart Hub enclosure
  • Access Control Core
  • Standoffs
  • Mounting template
  • Bracket and push-in fasteners
  • Power cable
  • Spade lugs (optional)
  • 4-Port Expansion Board
  • USB cable

Product Usage Instructions

Mounting:

To mount the Smart Hub, follow these steps:

1. Open the enclosure.
2. Install the expansion board into the enclosure using the included standoffs (Quantity: 4).
3. Hang the enclosure onto the two fasteners and tighten them to the wall. Secure the bottom of the enclosure to the wall with two additional fasteners (not included).
4. Install the Access Control Core below the expansion board using the included bracket. Secure the bracket directly to the enclosure using washers and fasteners.

Installing:

To install the Smart Hub components:

1. Connect the Access Control Core to the Expansion Board with the included USB cable.
2. Connect the Access Control Core to an Ethernet cable with Internet access.
3. Connect the Access Control Core and the Expansion Board to the power supply using the included power cables.

Wiring:

Warning: Do not apply power during wiring. Ensure the Smart Hub is unplugged until all wiring is complete.

1. Connect the Access Control Core to the Expansion Board with the included USB cable.
2. Connect the Access Control Core to an Ethernet cable with Internet access.
3. Connect the Access Control Core and the Expansion Board to the power supply using the included power cables.

Connecting Avigilon Readers or Wiegand Readers:

*LED and BZR connections are not supported.

Connecting Locks or Strikes:

Wiring a fail-safe lock or strike will unlock when power is out. Fail-secure will remain locked when power is out.

Powering:

Warning: Do not attempt to wire connections within the Smart Hub while power is enabled.

1. For installations requiring a 220VAC power source, cut the jumper on the power supply module.
2. Plug the power cord into a 110VAC or 220VAC power source.

Provisioning:

To provision your Smart Hub:

1. Create an Avigilon Alta Control Center user account.
2. Follow the steps in Alta Control Center to create an organization and add devices.
3. Use the Avigilon Alta Access app to connect devices to an organization.
4. In the app, tap Devices at the bottom, then tap Scan for Devices and follow the instructions.

FAQ

• Q: What certifications does the product have?
  • A : The product is CE, IC, FCC, NOM, and UL294 certified.
• Q: How can I find more information about the product?
  • A: Scan the provided QR codes for access to video libraries and additional resources.

What’s Included

Overview

1. Power Supply
2. Expansion Board
3. Access Control Core

Mounting

1. Use the included paper template to mark and pre-drill the location for the enclosure. Install 2 fasteners (not included) leaving the heads ¼ inch out from the wall.
2. Hang the enclosure onto the two fasteners and tighten the fasteners to the wall. Use two additional fasteners (not included) to secure the bottom of the enclosure to the wall.

 Installing

1. Open the enclosure.
2. Install the expansion board into the enclosure using the included standoffs (Quantity: 4
3. Install the Access Control Core below the expansion board using the included bracket. Unscrew the retaining screw (a), slide the Access Control Core into the bracket, and then tighten (a) to the bracket.
   Use the included washers (b) and fasteners (c) to secure the bracket directly to the enclosure.

 Wiring

Warning: Do not apply power during wiring. Ensure the Smart Hub is unplugged until all wiring is complete.

1. Connect the Access Control Core to the Expansion Board with the included USB cable (see 1 below).
2. Connect the Access Control Core to an Ethernet cable with Internet access (see 2 below).
3. Connect the Access Control Core and the Expansion Board to the power supply using the included power cables (see 3 below).

Connecting Avigilon Readers or Wiegand Readers

LED and BZR connections are not supported.

Connecting Locks or Strikes

Wiring a fail-safe lock or strike will unlock when power is out. Fail-secure will remain locked when power is out

Powering

Warning: Do not attempt to wire connections within the Smart Hub while power is enabled.

1. For installations in Europe or that require a 220VAC power source, cut the jumper on the power supply module.
2. Plug the power cord into a 110VAC or 220VAC power source.

Example : North American power cord and outlet

Provisioning

1. Before you start, you’ll need an Avigilon Alta Control Center user account.

   • To create and register for an account, visit:
     control.openpath.com/login
     control.eu.openpath.com/login

2. Follow the steps in Alta Control Center to create an organization and add devices.

3. To connect devices to an organization, use the Avigilon Alta Access app.

4. In the app, tap Devices at the bottom.

5. Tap the Scan for Devices or +the button, and follow the instructions.

App Store® and the Apple logo® are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.

Certifications

FCC Compliance

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Industry Canada Notice and Marking

This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device

The frequency and the maximum transmitted power in EU is listed below.

Bluetooth LE (2402-2480MHz): 2 dBm

For More Information

Scan the following QR codes:

QuickStartGuidesSys4EntDve1-Rev3

© 2024, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logos and AVIGILON ALTA are trademarks or registered trademarks of Avigilon Corporation. All other trademarks are the property of their respective owners. Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors.

References

• Avigilon Alta Control Center
• Avigilon Alta Control Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>