KOHLER K-707000-D3 Frameless Sliding Bath Door Owner’s Manual
- July 12, 2024
- Kohler
Table of Contents
KOHLER K-707000-D3 Frameless Sliding Bath Door
Specifications
- Product Name: Frameless Sliding Bath Door K-707000-D3
- Available Colors/Finishes: Bright Polished Silver Anodized, Dark Bronze Anodized, Brushed Nickel
- Available Glass Options: Frosted
- Height Range: Min 56-5/8″ (1438 mm) – Max 59-5/8″ (1514 mm)
- Width Range: 55-7/16″ (1408 mm) to 52-9/16″ (1335 mm)
FAQ
- Q: Can the door be installed over existing shower door holes?
- A: The wall jambs are made of clear plastic and may not cover existing shower door holes. Ensure proper measurements and clearance for installation.
- Q: How long does the technology that repels water and soap scum last?
- A: The technology has been tested to last 10 times longer than the original CleanCoat, as per internal wear/abrasion testing conducted in 2021 using a microfiber cloth.
Features
- Frameless 1/4″ (6 mm) thick frosted tempered glass
- Center-guided mechanism for smooth, quiet sliding action and easy cleaning
- Contemporary towel bar and knob combination offers storage on the outside of the door without encroaching on the bathing space
- CleanCoat®+ glass coating creates a hydrophobic barrier that repels water, soap scum, and residue, saving time and protecting shower doors 10 times longer than original CleanCoat. (Based on 2021 internal wear/abrasion testing using a microfiber cloth.)
- Tempered glass ensures enhanced safety and durability
Technology
- Frameless design with minimal metal allows for greater ease of cleaning
- Low bottom track creates easy entry and exit to the bathing space
Installation
- Out-of-plumb adjustability simplifies installation
- Sliding bath door
- Not for use in hospitality
Codes/Standards
- ANSI Z97.1
- CAN/CGSB-12.1
- CPSC 16CFR 1201
Limited Warranty
- KOHLER® Bath and Shower Doors Ten-Year Limited Warranty
See website for detailed warranty information.
More Information
Available Colors/Finishes
Color tiles intended for reference only.
Available Glass Options
- Code Description
- D3 Frosted
Dimesnions
Technical Information
All product dimensions are nominal.
- Base-To-Wall Radius – Max: 3/8″ (10 mm)
- Shower Ledge Min Flat: 2-1/2″ (64 mm)
- Shower Wall Min Flat: 2-1/2″ (64 mm)
Notes
- Install this product according to the installation guide.
- Wall jambs are made of clear plastic and may not cover existing shower door holes.
- NOTICE: The vertical opening should be a minimum of 58″ (1473 mm) to allow clearance for installing the top track over the wall jambs.
- The vertical opening should be a minimum of 58″ (1473 mm) to allow for installation clearance.
Contact
- 1-800-4KOHLER (1-800-456-4537)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada
- 6-12-2024 20:07 – US
References
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
- Toilets, Showers, Sinks, Faucets and More for Bathroom & Kitchen | KOHLER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>