MONOGRAM ZTD90DSSNSS 30 Inch Minimalist Double Wall Oven Owner’s Manual

MONOGRAM ZTD90DSSNSS 30 Inch Minimalist Double Wall Oven

Product Information

Specifications

• Model : ZTS90DS, ZTD90DS, ZTS90DP, ZTD90DP
• Oven Type : Built-In Electric Wall Oven
• Convection Type : Direct Air Convection
• Size: 30 inches

Product Usage Instructions

Finding Model and Serial Numbers
To find the model and serial numbers, check on a label located on the side trim or behind the front of the lower oven door. Note down these numbers for any future correspondence or service calls.

Consumer Support and Registration
For questions, assistance, or to register your appliance, visit monogram.com. Registering your appliance ensures prompt service under warranty terms.

Scheduling Service
If you require expert repair service, visit monogram.com/contact to request service conveniently.

Remote Connectivity
For wireless network connectivity assistance (applicable for models with remote enable-feature), visit monogram.com/connect.

Parts and Accessories Ordering
To order parts or accessories for self-servicing, visit monogram.com/use- and-care/parts. Orders can be placed online 24/7.

Contact Information
If unsatisfied with service, contact Monogram via the website or write to the General Manager, Customer Relations at Appliance Park, Louisville, KY.

General Safety Instructions

• Read all safety instructions before using the product to prevent fire, electrical shock, injury, or death.
• Ensure the appliance is installed and grounded by a qualified installer following the provided instructions.
• Avoid modifying the oven unless specified in the manual; all other servicing should be done by a qualified technician.
• Prior to servicing or cleaning, disconnect power at the household distribution panel by switching off the circuit breaker or removing the fuse.

FAQ

• Q: Where can I find the model and serial numbers of the oven?
  • A: The model and serial numbers can be found on a label on the side trim or behind the front of the lower oven door.
• Q: How do I register my appliance?
  • A: You can register your appliance online at monogram.com/register or by mailing in the pre-printed registration card included in the packing material.
• Q: What should I do if I need parts or accessories for self-servicing?
  • A: You can order parts or accessories online at monogram.com/use-and-care/parts using VISA, MasterCard, or Discover cards.

WRITE DOWN THE MODEL AND SERIAL NUMBERS
You can find them on a label on the side trim or on the front of the (lower) oven behind the oven door. Use these numbers in any correspondence or service calls concerning your appliance.

Please write these numbers here:

• Model Number
• Serial Number

CONSUMER SUPPORT

• MONOGRAM WEBSITE
  Have a question or need assistance with your appliance? Try the Monogram website 24 hours a day, any day of the year! You can also shop for more great Monogram products and take advantage of all our on-line support services designed for your convenience. In the US: monogram.com.

• REGISTER YOUR APPLIANCE
  Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. You may also mail in the pre-printed registration card included in the packing material.
  In the US : monogram.com/register.

• SCHEDULE SERVICE
  Expert Monogram repair service is only one step away from your door. To request service in the US, visit our website at monogram.com/contact

• REMOTE CONNECTIVITY
  For assistance with wireless network connectivity (for models with remote enable), visit our website at monogram.com/connect

• PARTS AND ACCESSORIES
  Individuals qualified to service their own appliances can have parts or accessories sent directly to their homes (VISA, MasterCard and Discover cards are accepted). Order on-line today 24 hours every day.
  In the US: monogram.com/use-and-care/parts
  Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

• CONTACT US
  If you are not satisfied with the service you receive from Monogram, contact us on our website with all the details including your phone number, or write to:

• In the US : General Manager, Customer Relations | Monogram Appliances, Appliance Park | Louisville, KY 40225 monogram.com/contact

**IMPORTANT SAFETY INFORMATION

**

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

WARNING Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death.

WARNING GENERAL SAFETY INSTRUCTION

• Use this appliance only for its intended purpose as described in this Owner’s Manual.

• Be sure your appliance is properly installed and grounded by a qualified installer in accordance with the provided installation instructions.

• Do not attempt to repair or replace any part of your oven unless it is specifically recommended in this manual. All other servicing should be performed by a qualified technician.

• Before performing any service, disconnect the power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

• Do not leave children alone-children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to climb, sit or stand on any part of the appliance.
  CAUTION

• Do not store items of interest to children in cabinets above an oven – children climbing on the oven to reach items could be seriously injured.

• Use only dry pot holders-moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot heating elements. Do not use a towel or other bulky cloth in place of pot holders.

• Never use your appliance for warming or heating the room.

• Do not touch the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact any interior area of the oven; allow sufficient time for cooling first. Other surfaces of the appliance may become hot enough to cause burns. Potentially hot surfaces include the oven vent opening surfaces near the opening and crevices around the overdoor.

• Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

• Do not use any type of foil or liner to cover the oven bottom or anywhere in the oven, except as described in this manual. Oven liners can trap heat or melt, resulting in damage to the product and risk of shock, smoke or fire.

• Avoid scratching or impacting glass doors or control panels. Doing so may lead to glass breakage. Do not cook on a product with broken glass. Shock, fire or cuts may occur.

• Cook meat and poultry thoroughly to at least an internal temperature of 160°F and poultry to at least an internal temperature of 180°F. Cooking to these temperatures usually protects against foodborne illness.

WARNING
IN THE EVENT OF A FIRE, TAKE THE FOLLOWING STEPS TO PREVENT INJURY AND FIRE SPREADING

• Do not use water on grease fires. Never pick up a flaming pan.
• If there is a fire in the oven during baking, smother the fire by closing the oven door and turning the oven off or by using a multi-purpose dry chemical or foam-type fire extinguisher.
• If there is a fire in the oven during self-cleaning, turn the oven off and wait for the fire to go out. Do not force the door open. The introduction of fresh air at self-clean temperatures may lead to a burst of flame from the oven. Failure to follow this instruction may result in severe burns.

WARNING
OVEN SAFETY INSTRUCTIONS

• Stand away from the oven when opening the oven door. Hot air or steam that escapes can cause burns to hands, face, and/or eyes.
• Keep the oven vent unobstructed.
• Keep the oven free from grease buildup. Grease in the oven may ignite.
• Place oven racks in the desired location while the oven is cool. If rack must be moved while the oven is hot, do not let pot holder contact hot heating element in oven.
• When using cooking or roasting bags in the oven, follow the manufacturer’s directions.
• Pulling out the standard racks to their stop-locks or the extension rack to its fully open position is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.
• Do not leave items such as paper, cooking utensils or food in the oven when not in use. Items stored in an oven can ignite.
• Never place cooking utensils, pizza or baking stones, or any type of foil or liner on the oven floor. These items can trap heat or melt, resulting in damage to the product and risk of shock, smoke or fire.

WARNING
SELF-CLEANING OVEN SAFETY INSTRUCTIONS
The self-cleaning feature operates the oven at temperatures high enough to burn away food soils in the oven. Follow these instructions for safe operation.

• Do not touch oven surfaces during self-clean operation. Keep children away from the oven during self-cleaning. Failure to follow these instructions may cause burns.
• Before self-cleaning the oven, remove shiny silver-colored oven racks (on some models), the probe, any aluminum foil, and any broiler pan, grid, and other cookware. Only porcelain-coated oven racks may be left in the oven.
• Before operating the self-clean cycle, wipe grease and food soils from the oven. Excessive amounts of grease may ignite, leading to smoke damage to your home.
• If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.
• Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
• Do not use a protective coating to line the oven and do not use commercial oven cleaner unless certified for use in a self-cleaning oven.

The remote enable equipment installed on this oven has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to: (a) provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

(b) accept any interference received, including interference that may cause undesired operation of the device. Note that any changes or modifications to the wireless communication device installed on this oven that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

PROPER DISPOSAL OF YOUR APPLIANCE
Dispose of or recycle your appliance in accordance with Federal and Local Regulations. Contact your local authorities for the environmentally safe disposal or recycling of your appliance.

HOW TO REMOVE PROTECTIVE SHIPPING FILM AND PACKAGING TAPE
Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.
To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.

NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on. Consider recycling options for your appliance packaging material.

USING THE OVEN

OVEN CONTROLS

• Upper Oven and Lower Oven
  When using a double oven you can set separate modes in each oven. The selected oven will appear above the cooking modes. NOTE: If using a single oven, there will not be an oven selection.

• Bake
  This option allows the user to access the traditional bake mode.

• Broil
  Broil can be selected to access Broil Low and Broil High. See the Cooking Modes section for more information.

• Convect
  This option allows you to utilize the convection system to cook in a variety of modes. See the Cooking Modes section for more information.

• More
  Select this option to access the Proof, Air Fry, Warm, Dehydrate (upper oven only), Self Clean, and Steam Clean options.

• Precision Cooking
  Precision Cooking is a suite of customized cooking cycles that have been designed for specific foods. The display will guide you through setting the oven and food appropriately for the cycle selected. Precision cooking cycles vary based on food type; see the Cooking Modes section for more detailed information.

• Recipes
  This option allows you to access pre-loaded recipes for certain foods. New recipes can be loaded and followed through the GE Appliances Kitchen App once your
  phone is connected. See the Wi-Fi Connect section for instructions on connecting your phone.

• Oven Light
  To turn on or off the oven cavity lights, press the ****. Both cavity lights will be illuminated if using a double oven.

• Settings
  Press the ****to access the Settings. See the Settings section for more information.

• Favorite
  This option allows the user to save their favorite cycles for easy access in the future. After selecting a cooking mode and setting the temperature and any timers, press the to save it as a favorite for future use. After saving a cycle, press the on the main menu to quickly access the saved mode.

• Kitchen Timer
  This feature works as a countdown timer. Press the , select the amount of time for the timer to operate, and press Start. The oven will continue to operate once the timer countdown is complete. To turn off the timer, select the and press Clear.

• Cook Time
  This function counts down cooking time and turns off the oven when the cooking time is complete. Press the ****during a cycle, select the amount of cooking time, and press Start.

• DelayTime
  This feature delays the start time for an oven cycle. Use this feature to set a time when you want the oven to start. Select a cycle, then press the ****. Select the time of day for the oven to turn on and press Start. A cook time can also be programmed if desired.

• Wi-Fi & Remote Enable
  Press ****GET CONNECTED to connect your oven to Wi-Fi. This option allows you to download content to your oven and control it remotely. The oven must be connected
  to Wi-Fi before Remote Enable can be activated. For instructions on how to connect your oven, see the Wi-Fi Connect/Remote Enable section under Settings in this manual.

• Specific Temperature Setting
  Oven temperature defaults to scroll in 25 deg increments. To set a specific temperature, press and hold on the temperature and a number pad will come up to enter a specific value. Then press Start to enter.

DOUBLE WALL OVEN CONTROLS
When using both cavities to cook, the control will allow you to switch back and forth between the upper and lower oven to review the cycle selection for each. When viewing the cooking mode screen you can access the alternate cavity by pressing on the banner at the top or bottom of the screen.

SETTINGS
Numerous settings are accessed by pressing ****in the top right corner of the main screen.

• Wi-Fi & Remote Enable
  This appliance is configurable to allow remote operation at any time. Do not store any flammable materials or temperature-sensitive items inside. By using the Wi-Fi Connect feature, you will be able to control essential oven operations such as temperature settings, timers and cooking modes using your smartphone or tablet.* Select the then Wi-Fi & Remote Enable – follow the instructions on your oven display and phone app. It is necessary to turn on Wi-Fi before using Remote Enable on your oven.

• Connecting your Wi-Fi Connect Enabled oven

1. Have your smartphone or tablet ready with the ability to access the internet and download apps.
2. You will need to know the password of your home Wi-Fi router. Have this password ready while you are setting up your Monogram oven.
3. On your smartphone or tablet, visit [monogram.com](http://monogram.com) connect to learn more about connected appliance features and to download the app to connect to your oven.
4. Follow the onscreen instructions in the app to connect your Monogram oven. When connected, your oven should show that it is connected to your home Wi-Fi network.
5. If there are issues connecting wirelessly to your oven, please call 800.220.6899 and ask for assistance regarding oven wireless connectivity.  

To connect additional smart devices, repeat steps 3 and 4.

• Remote Starting your Oven
  To be able to start the oven remotely once connected to Wi-Fi. press Remote Enable on the main menu or access Wi-Fi & Remote Enable in the settings menu and turn Remote Enable on. The oven can now be started remotely using a connected device. The **icon must be active to start the oven remotely. To disconnect your phone from Remote Enable, access the Wi-Fi & Remote Enable settings and turn Remote Enable off.
  NOTE:** Foods that spoil easily-such as milk, eggs, fish, stuffings, poultry and should not be allowed to sit for more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that the oven light is off because heat from the bulb will speed up harmful bacteria growth.

• Set Clock
  This feature allows you to set the clock and specifies how the time of day will be displayed. Options are for a standard 12-hour clock with AM and PM selections or 24-hour military time display.

• Lock Control
  Select this option in order to lock the LCD from any undesired screen selections. To unlock the screen, press and press Unlock on the next screen.

• Sabbath
  Sabbath mode disables the oven lights (the oven light will not turn on when the door is opened), all sounds (the control will not beep when the screen is pressed), Convection modes, Broil modes, Warm, Proof, and all time functions. Sabbath mode can only be used with traditional Bake. This feature conforms to Jewish Sabbath requirements. Please reference the Sabbath Mode section for more information.

• Sound
  This setting screen allows you to change the volume, the end of cycle tone, and turn on or off the touch sound.

• Display
  This screen shows the options for brightness, clock off, and energy saver. Clock off will remove the clock from the display when the screen is inactive, but it will be shown after pressing the screen.

• Cooking

  • The oven is set to Fahrenheit, however, in this setting the cooking unit can be changed to Celsius.
  • Auto Recipe Conversion can be turned on in order to automatically reduce the programmed cooking temperature for Convection Bake or Convection Bake Multi. Note that this will only reduce the cooking temperature, not the baking time.
  • When the 12 Hour Shut Off option is turned on, it will automatically shut off the oven after 12 hours of continuous use. When dehydrate is running, the 12 hour shutoff is deactivated.
  • Adjust Temperature allows the oven temperature to be adjusted up to 35°F hotter or down to 35°F coole. Use this feature if you believe your oven temperature 1s too hot or cold and wish to change it. For double ovens, the upper and lower oven temperatures are adjusted separately. Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20- 40 degrees.

• System
  This screen allows you to clear your saved user data and shows the current software version.

SABBATH (SAbbAtH)
Sabbath mode disables the oven lights (the oven light will not turn on when the door is opened), all sounds (the control will not beep when the screen is pressed), Convection modes, Broil modes, Warm, Proof, and all time functions. Sabbath mode can only be used with traditional Bake. This feature conforms to Jewish Sabbath requirements.
NOTE: If a power outage occurs during when the oven is in Sabbath Mode, the unit will return to Sabbath Mode when power is restored.

• Entering Sabbath Mode
  Press the ****on the main screen to access the Settings menu and scroll down to Sabbath.

• Start a Sabbath Bake
  Use the keypad on the screen to enter the temperature that you would like to use for Sabbath Bake. Once the temperature is set, press the ****to set the cook time for the cycle in hours and minutes. If using a double oven, you can then set the temperature and time desired for the other cavity by selecting it to the left of the temperature display. If a timer is not set, the oven will start a bake cycle during Sabbath mode and continue until Sabbath mode is turned off. Once you have programmed the temperature and time, press Start. The next screen will display the settings that you programmed for your Sabbath Bake.

• Adjusting the Temperature During a Sabbath Bake
  If the temperature needs to be adjusted after programming the oven for a Sabbath Bake, press one of the temperature icons displayed on the Sabbath cycle screen and press Enter. This will allow you to adjust the temperature for the cycle. Note that the display will not show that the oven temperature has been changed.

• Exit the Sabbath Mode
  To exit Sabbath mode, either press the X in the upper right corner if in the programming screen, or press Exit Sabbath if in the cycle screen. There is also an option to turn off the cycle when on the cycle screen by pressing Turn Off, but your oven will still remain in Sabbath mode until you exit the mode.
  NOTE: If a power outage occurs while the oven is in Sabbath Mode, the unit will return to Sabbath Mode when power is restored, however the oven will return to the off state even if it was in the middle of a bake cycle when the power outage occurred.

OVEN RACKS
Your oven has six rack positions. Recommended rack positions for various types of foods are provided in the Cooking Guide. Adjusting rack position is one way to impact cooking results. For example, if you would prefer darker tops on cakes, muffins, or cookies, try moving food one rack position higher. If you find foods are too brown on top try moving them down next time.
When baking with multiple pans and on multiple racks, ensure there is at least 1½” between pans to allow sufficient space for air to flow.

Your oven may have extension racks and/or traditional flat racks. To avoid possible burns, place the racks in the desired position before you turn the oven on.

• Extension Racks
  Extension racks have an install feature that locks into the rack supports (guides) on both sides. Once the install feature is locked into place, always pull the rack out, by its upper front rail, to its full extension stop position, when placing or removing cookware.

• To Remove An Extension Rack:

1. Make sure the rack is pushed all the way into the oven.
2. Grasp the rack by both its upper front rail and lower front rail and lift straight up to unlock the rack from the rack supports.
3. Firmly holding onto both the upper front rail and lower front rail, pull the rack forward. Grasp the rack on both sides if necessary. Then remove it from the oven.

• To Replace An Extension Rack:

1. Place the rear portion of the rack onto the rack supports (guides) as shown in the picture.
2. Hold the upper front rail and lower front rail and push the rack all the way in until the install feature locks into the front rack support.  

If extension racks are difficult to replace or remove, wipe the oven rack supports with vegetable oil. Do not wipe oil on the rack slides.
NOTE: Using other cooking oils will cause a discoloring or a rust like color residue on the racks and cavity sides. To clean this residue, use a soap and water or a vinegar and water solution. Rinse with clean water and dry with a soft cloth.

• Traditional Flat Racks
  The racks have stops so that when placed correctly on the supports they will stop before coming completely out and will not tilt. When placing and removing cookware, pull the rack out until it stops.

  • To Remove a Rack
    Pull it toward you, tilt the front end up and pull it out.

  • To Replace a Rack
    Tilt the front of the rack up, hook the rear locating posts under the rack supports, push the rack back (past the stoppers) and lower it into position. Push the rack all the way in.
    Racks may become difficult to slide, especially after a self-clean. Put some vegetable oil on a soft cloth or paper towel and rub onto the left and right edges.
    NOTE: Using other cooking oils will cause a discoloring or a rust-like color residue on the racks and cavity sides. To clean this residue, use a soap and water or a vinegar and water solution. Rinse with clean water and dry with a soft cloth.
    CAUTION Use caution when removing a rack from lowest position as door may be hot.

ALUMINUM FOIL AND OVEN LINERS

CAUTION Do not use any type of foil or oven liner to cover the oven bottom. These items can trap heat or melt, resulting in damage to the product and risk of shock, smoke or fire. Damage from improper use of these items is not covered by the product warranty.
Foil may be used to catch spills by placing a sheet on a lower rack, several inches below the food. Do not use more foil than necessary and never entirely cover an oven rack with aluminum foil. Keep foil at least 1-1/2″ from oven walls to prevent poor heat circulation.

COOKING MODES
Your new oven has a variety of cooking modes to help you get the best results. These modes are described below. Refer to the Cooking Guide section for recommendations for specific foods. Remember, your new oven may perform differently than the oven it is replacing.

• Temperature Setting
  When selecting a temperature, the traditional preset temperatures are shown and can be selected by scrolling horizontally and selecting the desired temperature. If you wish to cook at an alternate temperature, see the Oven Controls section.

• Baking and Roasting Modes
  Select a mode for baking and roasting based on the type and quantity of food you are preparing. When preparing baked goods such as cakes, cookies, and pastries always preheat the oven first. Follow recipe recommendations for food placement. If no guidelines are provided, center food in the oven.

• Traditional Bake
  The traditional bake mode is intended for single rack cooking. This mode uses heat primarily from the lower element but also from the upper element to cook food. To use this mode press the Bake pad under Traditional, enter a temperature, and then press Start. Preheating is generally recommended when using this mode.

• Convection Bake with Direct Air
  The Convection Bake mode is intended for single rack cooking. This mode uses heat from the lower element and also the upper and rear elements, along with air movement directly down from the top of the oven to enhance evenness. Your oven is equipped with Auto Recipe Conversion, so it is not necessary to convert the temperature when using this mode. To use this mode press the Bake pad under Convection, enter a temperature, and then press Start. Preheating is generally recommended when using this mode.
  Convection Bake Multi Rack
  The Convection Bake Multi Rack mode is intended for baking on multiple racks at the same time. This mode uses heat primarily from the rear element but also heat from the upper and lower elements, along with air movement from the convection fan to enhance cooking evenness. Your oven is equipped with Auto Recipe Conversion, so it is not necessary to convert the temperature when using this mode. Baking time might be slightly longer for multiple racks than what would be expected for a single rack. To use this mode press the Bake Multi Rack pad under Convection, enter a temperature, and then press Start. Always preheat when using this mode.

• Convection Roast with Direct Air
  The Convection Roast mode is intended for roasting whole cuts of meat on a single rack. This mode uses heat from the lower, upper, and rear elements along with air movement directly down from the top of the oven
  to improve browning and reduce cooking time. It is not necessary to convert temperature. Check food earlier than the recipe suggested time when using this mode, or use the probe. To use this mode press the Roast pad under Convection, enter a temperature, and then press Start. It is not necessary to preheat when using this mode.

• Broiling Modes
  Always broil with the door closed. The broil element in this oven is very powerful. Monitor food closely while broiling. Use caution when broiling on upper rack positions as placing food closer to the broil element increases smoking, spattering, and the possibility of fats igniting. Broiling on rack position 6 is not recommended. Try broiling foods that you would normally grill. Adjust rack positions to adjust the intensity of the heat to the food. Place foods closer to the broil element when a seared surface and rare interior is desired. Thicker foods and foods that need to be cooked through should be broiled on a rack position farther from the broiler or by using Traditional Broil Lo or Convection Broil Lo. For best performance, center food below the broil heating element.

• Traditional Broil Hi
  The Traditional Broil Hi mode uses intense heat from the upper element to sear foods. Use Broil Hi for thinner cuts of meat and/or foods you prefer less done on the interior. To use this mode press the Broil pad once under Traditional and then press Start. It is not necessary to preheat when using this mode.

• Traditional Broil Lo
  The Traditional Broil Lo mode uses less intense heat from the upper element to cook food thoroughly while also producing surface browning. Use Broil Lo for thicker cuts of meat and/or foods that you would like cooked all the way through. To use this mode press the Broil pad twice under Traditional and then press Start. It is not necessary to preheat when using this mode.

• Convection Broil Hi with Direct Air
  The Convection Broil Hi mode uses intense heat from the upper element along with air movement directly down from the top of the oven for improved searing and browning. To use this mode press the Broil pad once under Convection and then press Start. For best results preheat 5 minutes when using this mode.

• Convection Broil Lo with Direct Air
  The Convection Broil Lo mode uses less intense heat from the upper element along with air movement directly down from the top of the oven. To use this mode press the Broil pad twice under Convection and then press Start. For best results preheat 5 minutes when using this mode.

• Air Fry
  This mode is a special convection mode that is designed to produce foods with a crispier exterior than traditional oven cooking. The Air Fry mode uses hot, fast-moving air directed from above the food and is intended for single rack baking only. Select More, then Air Fry, then input the desired set temperature and press Start. The temperature can be set between 300°F and 500°F. Preheating is not necessary for this mode. Follow recipe or package guidelines for set temperatures and cook times; adjust cook time to achieve your desired crispness. Additional guidelines for using this mode can be found in the Cooking Guide.

• Proof
  Proof mode is designed for rising (fermenting and proofing) bread doughs. Press the Proof pad and then press Start. Cover dough well to prevent drying out. Bread will rise more rapidly than at room temperature.

• Warm
  Warm mode is designed to keep hot foods hot for up to 3 hours. To use this mode, press the Warm pad then press Start. Cover foods that need to remain moist and do not cover foods that should be crisp. Preheating is not required. Do not use warm to heat cold food other than crisping crackers, chips or dry cereal. It is also recommended that food not be kept warm for more than 2 hours.

• Precision Cooking
  These modes provide guidance or pre-set cooking algorithms to assist the user in cooking various types of food. The selection you make in the Precision Cooking menu will guide you to input the information required to help cook your food. At the end of estimated cooking time, check the food to see if it is done to your liking. Note that differences in food shape, preparation and preferences for doneness can impact the time required to cook the food. Some cycles require the food temperature probe supplied with your oven. The target temperature for the probe is automatically set based on selections made for each food. Always check foods using a secondary food thermometer as probe placement can impact the measured temperature. See Probe section for more details on using and positioning the probe properly. On some screens will show up. Press to access additional information that pertains to the cooking cycles within the category. Additional cycles will be available through software updates. Connect your oven to have access to these updates. See the WiFi Connect section for details on how to connect your oven.

PROBE
Internal food temperature is frequently used as an indicator of doneness, especially for roasts and poultry. The Probe mode monitors the internal food temperature and turns the oven off when the internal food temperature reaches the programmed temperature.

WARNING Consuming undercooked food can result in foodborne illness. Use probe according to the following instructions to ensure all portions of the food reach minimum safe cooking temperatures. Recommendations for minimum safe food temperatures can be found at foodsafety.gov or IsltDoneYet.gov. Always check the temperature at multiple locations in the food with a food thermometer after cooking to ensure that all portions of the food have reached the minimum safe internal temperature for that food.

• Proper Probe Placement
  After preparing the meat and placing it on the cooking pan follow these instructions for proper probe placement.

  • Insert the probe into the food, so that the tip of the probe will rest in the center of the thickest part of the food. For best performance the probe should be fully inserted into the food. If the probe is not located properly, it may not accurately measure the temperature of the coolest portion of the food. Some foods, particularly small items, are not well suited for cooking with the probe due to their shape or ize.
  • The probe should not touch bone, fat or gristle.
  • For whole poultry insert the probe into the thickest part of the breast.
  • For boneless roasts, insert the probe into the center of the roast.
  • For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint.
  • For casseroles or dishes such as meatloaf, insert the probe into the center of the dish.
  • For fish, insert the probe from just above the gill into the meatiest area, parallel to the backbone.

• Probe Usage

  • To use the probe without preheating:
  1. Insert the probe into the food (see Proper Probe Placement).
  2. Place the food in the oven and connect the probe into the probe outlet in the oven. The probe outlet can be found in both the upper and lower oven.
  3. Select the desired cooking mode and temperature. Before pressing start, press the Probe icon at the bottom right of the screen. The probe setting screen will be displayed. Enter the desired internal food temperature and press Start. The probe temperature can be set between 100°F and 200°F.
  • To use the probe with preheating:
  1. Press the desired cook mode (Traditional Bake, Convection Bake, or Convection Roast) pad and enter the desired cooking temperature.
  2. Insert the probe into the food (see Proper Probe Placement). Place the food in the oven and connect the probe into the probe outlet in the oven. The probe outlet can be found in both the upper and lower oven.
  3. Once the oven is preheated, place the food in the oven and connect the probe to the probe outlet, making sure it is fully inserted. Use caution, the oven walls and probe outlet are hot.
  4. The oven will detect that the probe has been inserted and the probe setting screen will be displayed. Enter the desired internal food temperature and press Start. The probe temperature can be set between 100°F and 200° F.

• Probe Care Guidelines
  NOTE: some double oven models have a probe in the upper oven only.

  • Use of probes other than the one provided with this product may result in damage to the probe.
  • Use the handles of the probe and plug when inserting and removing them from the meat and outlet
  • To avoid damaging your probe, do not use tongs to pull on the cable when removing it.
  • To avoid breaking the probe, make sure food is completely defrosted before inserting the probe.
  • To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.
  • Never leave the probe inside the oven during a self or steam-clean cycle.
  • Do not store the probe in the oven.

COOKWARE

• Cookware Guidelines
  The material, finish, and size of cookware affect baking performance. Dark, coated and dull pans absorb heat more readily than light, shiny pans. Pans that absorb heat more readily can result in a browner, crisper, and thicker crust. If using dark and coated cookware check food earlier than minimum cook time. If undesirable results are obtained with this type of cookware consider reducing oven temperature by 25° F next time.
  Shiny pans can produce more evenly cooked baked goods such as cakes and cookies. Glass and ceramic pans heat slowly but retain heat well. These types of pans work well for dishes such as pies and custards. Air-insulated pans heat slowly and can reduce bottom browning. Keep cookware clean to promote even heating.

• Air Fry Cookware
  Only use broil safe cookware when using Air Fry mode. A dark surface, solid baking pan with low-rimmed sides, such as a sheet pan, is recommended for use with Air Fry. The darker pan surface promotes better browning and crisping.
  Oven baking baskets and baking grids can also be used, but a sheet pan should be placed on the rack below the foods to catch any drippings when using a baking basket.

COOKING GUIDE
Recommended settings for many foods can also be accessed through the Precision Cooking menu on the oven display. In some cases a custom mode particularly tailored to the specific food selected is used when selecting through the Precision Cooking menu.

*When baking four cake layers at a time, use racks 2 and 4. Place the pans as shown so that one pan is not directly above another. Cook food thoroughly to help protect against food-borne illness. Minimum safe food temperature recommendations for food safety can be found at lsltDoneYet.gov. Make sure to use a food thermometer to take food temperatures.

DEHYDRATING GUIDE (upper oven only on double oven models)
Dehydrate is a special convection mode that is designed for dehydrating foods such as fruits, vegetables or herbs, and making fruit leathers or jerkies. The dehydrate mode uses airflow and low heat to remove moisture from foods. The door must be partially open when running the dehydrate mode. Use the door spacer provided with your oven to prop the door open to the appropriate position as shown below. Once the door prop is in place, select More, then Dehydrate, then input the desired set temperature and press Start. The temperature can be set between 105°F and 225°F. When the dehydrate mode is running, 12 hour shut-off is automatically disabled.

• Consult online and book references for information on how to safely and properly dehydrate
  foods.

• Dehydrating at too high of a temperature can prevent the interior of foods from sufficiently drying.

• Dehydrating at too low of a temperature or too slowly can allow microorganisms to grow resulting in spoilage or food-borne illness.

• Do not only rely on exterior appearance or texture, check food interior to ensure that foods are sufficiently dried.

• Dehydrating times are impacted by the initial condition of the food, ambient humidity, temperature setting, quantity of food, etc. Thinner, smaller pieces of foods will dehydrate more quickly than thicker or larger pieces.

• For best performance when using the dehydrate mode use grids or racks with small spacing that allow air to reach food from all sides. These can be placed directly on your oven rack. Parchment paper or silicone baking mats can be used for dehydrating purees.

• It is normal to see moisture on the interior oven surfaces when dehydrating.

• Some foods benefit from a pretreatment.

• Remove excess moisture from the exterior of foods prior to dehydrating.

• Pierce, check, or cut foods such as blueberries, cranberries or grapes prior to dehydrating.

• Periodically blot meats to remove excess fat during dehydrating.

• Dehydrating more than 4 racks at a time is not recommended.

Food Type| Recommended Set Temperature (OF)| Expected Drying Time (hours)
---|---|---
Fruits| 130-140| 4- 36
Herbs| 105-115| 2- 18
Meat/Jerky| 145-165| 4- 12
Vegetables| 125-130| 3- 24
Meat should be heated to 165 ° F before dehydrating. See fsis.usda.gov for more information
Number of Oven Racks Used During Dehydrate Mode| Rack Positions in Your Oven
---|---
1 rack| 3 {flat or extension rack)
2 racks| 2 (extension rack) and 4 (flat rack)
3 racks| 2 (flat rack), 3 (extension rack) and 5 (flat rack)
4 racks| 2 (flat rack), 3 {flat rack),

4 (flat rack), and 5 (flat rack)

CARE AND CLEANING

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven

CONTROL PANEL
To lock the controls, press in the bottom left corner and follow the instructions on the display. Instructions for unlocking are visible when the display is locked. It’s a good idea to wipe the control panel after each use. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth. Do not use abrasive cleansers, strong liquid cleansers, plastic scouring pads or oven cleaners on the control panel-they will damage the finish.

OVEN EXTERIOR
Do not use oven cleaners, abrasive cleansers, strong liquid cleansers, steel wool, plastic scouring pads, or cleaning powders on the interior or exterior of the oven. Clean with a mild soap and water or vinegar and water solution. Rinse with clean water and dry with a soft cloth. When cleaning surfaces, make sure that they are at room temperature and not in direct sunlight. If stain on the door vent trim is persistent, use a mild abrasive cleaner and a sponge scrubber for best results. Spillage of marinades, fruit juices, tomato sauces and basting liquids containing acids may cause discoloration and should be wiped up immediately. Let hot surfaces cool, then clean and rinse.

• Painted Surfaces And Black Stainless Steel (on some models)
  • Painted surfaces may include the door and trim around the control panel.
  • Clean these with soap and water or a vinegar and water solution.
  • Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface, including Black Stainless Steel.
• Stainless Steel – Excluding Black Stainless Steel (on some models)
  • Do not use a steel wool pad; it will scratch the surface.
  • To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish.
  • Always wipe the surface in the direction of the grain.
  • Follow the cleaner instructions for cleaning the stainless steel surface.
  • Cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove surface rust, tarnish and small blemishes.
  • Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp, soft sponge.
  • To inquire about purchasing cleaning products including stainless steel appliance cleaner or polish, see the Accessories and Consumer Support sections at the end of this manual.

OVEN INTERIOR
The interior of your new oven can be cleaned manually or by using Steam Clean or Self Clean modes. Spillage of marinades, fruit juices, tomato sauces and basting liquids containing acids may cause discoloration and should be wiped up immediately. Let hot surfaces cool, then clean and rinse.

• Manual Cleaning
  Do not use oven cleaners, (unless certified for self­cleaning oven), strong liquid cleansers, steel wool, or scouring pads on the interior of the oven. Clean with a mild soap and water, or vinegar and water solution. Rinse with clean water and dry with a soft cloth. When cleaning surfaces, make sure that they are at room temperature.

• Steam Clean Mode
  Steam clean is intended to clean small spills using water and a lower cleaning temperature than Self-Clean.
  To use the Steam Clean feature, wipe grease and soils from the oven. Pour one cup of water into the bottom of the oven. Close the door. Press the More option, then select Steam Clean, and press Start to the right of the screen. The oven door will lock. You cannot open the door during the 30-minute steam clean as this will decrease the steam clean performance. At the end of the steam clean cycle the door will unlock. Wipe out any excess water and any remaining soil.
  NOTE: Water in the bottom of the oven may be hot right after finishing the cycle.

• Self Clean Mode
  Read Self-Cleaning Oven Safety Instructions at the beginning of this manual before using Self Clean Mode. Self-clean uses very high temperatures to clean the oven interior. The oven door will lock when using this feature. Before operating the self clean cycle, wipe up grease and soils from the oven. Remove all items from the oven other than enameled (dark color) racks. Shiny or silver racks, the meat probe, and any cookware or other items should all be removed from the oven before initiating a self clean cycle. Close the door. If using a double oven, select which oven you would like to clean. Select the More option, then Self Clean. Choose a 3, 4, or 5 hour cycle, and select the illuminated Start pad to the right of the screen. For heavily soiled ovens, the maximum 5 hour clean time is recommended. If you wish to use the default time, press Start immediately after selecting Self Clean. The oven will show that the door has locked and display the amount of time remaining in the cycle. Press the illuminated Cancel pad to the right of the screen if you wish to stop the cycle. The oven will turn off automatically when the self clean cycle is complete. The door will stay locked until the oven has cooled down. After the oven has cooled down wipe any ash out of the oven. We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle. Soil on the front frame of the oven and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel wool pads or cleaners such as Soft Scrub®. Rinse well with clean water and dry. Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it. Make sure the oven light bulb cover is in place and the oven light is off. When using the Self Clean Mode in a double oven, only the upper or lower oven can utilize the cycle at one time. Additionally, no other mode may be started in the alternate oven cavity while self-clean is in progress.
  IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

PROBE
The temperature probe may be cleaned with soap and water or a soap-filled scouring pad. Cool the temperature probe before cleaning. Scour stubborn spots with a soap-filled scouring pad, rinse and dry. To order additional temperature probes, see the Accessories and Consumer Support sections at the end of this manual.

• Do not immerse the temperature probe in water.
• Do not store the temperature probe in the oven.
• Do not leave the temperature probe inside the oven during a self or steam-clean cycle.

OVEN RACKS
The racks that were provided with your oven (dark enameled racks, not shiny) may remain in the oven during the self-cleaning cycle without being damaged. To manually clean racks, use warm, soapy water. Make sure not to wash the rack slides on an extension rack. If racks become more difficult to remove from the oven, put some vegetable oil on a soft cloth or paper towel and rub onto the oven rack supports. Do not wipe the oil on an extension rack slide.
NOTE: Using other cooking oils will cause a discoloring or rust-like color residue on the racks and cavity sides. To clean this residue, use soap and water or a vinegar and water solution. Rinse with clean water and dry with a soft cloth.

OVEN HANDLE REPLACEMENT
Some models have custom handles. Please follow the instructions with the handle for proper installation.

OVEN DOORS

• Lift-Off Oven Door
  The door is very heavy. Be careful when removing and lifting the door.
  Do not lift the door by the handle.

• To remove the door:

1. Fully open the door.
2. Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat­blade screwdriver, may be required.
3. Firmly grasp both sides of the door at the top.
4. Close door to the door removal position. The door should be open approximately 3″ with no obstruction above the door.
5. Lift door up and out until both hinge arms are clear of the slots.

• To replace the door:

1. Firmly grasp both sides of the door at the top.
2. Starting on the left side, with the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot. Repeat for right side.
3. Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity, to the locked position.
5. Close the oven door.

OVEN LIGHT

• Oven Light Replacement
  WARNING SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
  CAUTION BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with bare hands or a damp cloth can cause burns.

1. Disconnect power at the main fuse or circuit breaker panel.
2. Remove oven racks.
3. Slide a flat-blade screwdriver between the housing and the glass light cover.
4. Support the glass light cover with two fingers to prevent the cover from falling to the bottom of the oven. Be careful not to chip the oven coating.
5. Gently twist the screwdriver blade to loosen the glass light cover.
6. Remove the glass light cover.
7. Remove the bulb by firmly grasping and sliding the bulb straight out until the two prongs have cleared the ceramic holder.
8. Do not touch the glass of the new replacement bulb with your fingers. It will cause the bulb to fail when it lights. Grasp the replacement bulb with a clean towel or facial tissue with the prongs facing down. Align the two prongs in the ceramic holder, pressing gently until the bulb is securely in the ceramic socket.
9. Slide the protective lens into the holder and push until the clips snap into the housing.
10. Reconnect power.

TROUBLESHOOTING TIPS

Save time and money! Review the charts on the following pages first and you may not need to call for service.

My new oven doesn’t cook like my old one. Is something wrong with the temperature settings?| Your new oven has a different cooking system from your old oven and therefore may cook differently than your old oven.| For the first few uses, follow your recipe times and temperatures carefully. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference. See the Special Features Section to adjust the oven temperature. NOTE: This adjustment affects Traditional Bake, Convection Bake and Convection Bake Multi temperatures; it will not affect Convection Roast, Traditional Broil, Convection Broil or Clean.
Food does not bake properly| Oven controls improperly set.| See the Cooking Modes section.
Rack position is incorrect or rack is not level.| See the Cooking Modes section and Cooking Guide.
 | Incorrect cookware or cookware of improper size being used.| See the Cookware section.
 | Oven temperature needs adjustment.| See the Cooking option under the Settings section.
 | Ingredient substitution| Substituting ingredients can change the recipe outcome.
Food does not broil properly| Oven controls improperly set.| Make sure you select the appropriate broil mode.

NOTE: Convection crisp is not for broiling foods.

 | Improper rack position being used.| See the Cooking Guide for rack location suggestions.
 | Food being cooked in a hot pan.| Make sure cookware is cool
 | Cookware not suited for broiling.| Use a pan specifically designed for broiling
 | Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended.| If using aluminum foil conform to pan slits.
 | In some areas the power (voltage) may be low.| Preheat the broil element for 10 minutes.
Oven temperature too hot or too cold| Oven temperature needs adjustment.| See the Cooking option under the Settings section.
Oven does not work or appears not to work| A fuse in your home may be blown or the circuit breaker tripped.| Replace the fuse or reset the circuit breaker.
Oven controls improperly set.| See the Using the Oven section.
Oven is in Sabbath Mode| Verify, that the oven is not in Sabbath Mode. See the Sabbath option under the Settings section.
“Crackling” or “popping” sound| This is the sound of the metal heating and cooling during both the cooking and cleaning functions.| This is normal.
Why is my range making a “clicking” noise when using my oven?| Your range has been designed to maintain a tighter control over your oven’s temperature. You may hear your oven’s heating elements “click” on and off more frequently than in older ovens to achieve better results during baking, broiling, convection, and self-clean cycles.| This is normal.
Clock and timer do not work| A fuse in your home may be blown or the circuit breaker tripped.| Replace the fuse or reset the circuit breaker.
Oven light does not work| Light bulb is loose or defective.| Tighten or replace bulb.
Oven will not self-clean| The temperature is too high to set a self- clean operation.| Allow the oven to cool and reset the controls.
Oven controls improperly set.| See the Cleaning the Oven section.
Problem| Possible Cause| What To Do
---|---|---
Excessive smoking during clean cycle| Excessive soil or grease.| Press Can c el on the pad to the right of the screen to stop the cycle. Open the windows to rid the room of smoke. Wait until the door unlocks. Wipe up the excess soil and reset the clean cycle.
Excessive smoking during broiling| Food too close to burner element.| Lower the rack position of the food.
Oven door will not open after a clean cycle| Oven too hot.| Allow the oven to cool below locking temperature.
Oven not clean after a clean cycle| Oven controls improperly set.| See the Cleaning the Oven section.
Oven was heavily soiled.| Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
“F- and a number or letter ” are displayed on LCD screen| You have a function error code.| Press Dismi ss on the LCD screen. Allow the oven to cool for one hour. Put the oven back into operation.
If the function code repeats.| Disconnect all power to the oven for at least 30 seconds and then reconnect power. If the function error code repeats, call for service.
LCD is not functioning properly| A fuse in your home may be blown or the circuit breaker tripped.| Replace the fuse or reset the circuit breaker.
Oven controls improperly set.| See the Cooking Modes or Settings section to ensure proper use. Ensure unit is updated to the most recent software update.
LCD screen is locked.| Unlock the screen by pressing the Unlock icon. If this does not correct the issue, cycle power at the circuit breaker and ensure unit is updated to the most recent software update.
LCD is faulty.| Cycle power at the circuit breaker and ensure unit is updated to the most recent software update. If issue persists, call service to assess the issue.
Power outage , clock resets| Power outage or surge| Reset the clock. If the oven was in use, you must reset it by pressing Cancel , setting the clock and resetting any cooking function.
“Burning” or “oily” odor emitting from the vent| This is normal in a new oven and will disappear in time.| To speed the process, set a self-clean cycle for a minimum of 3 hours. See the Cleaning the Oven section.
Strong odor| An odor from the insulation around the inside of the oven is normal for the first few times the oven

is used.

| This is temporary and will go away after several uses or a self-clean cycle.
Fan noise| A cooling fan may automatically turn on.| This is normal. The cooling fan will turn on to cool internal parts. It may run for up to 1-1/2 hours after the oven is turned off.
My oven door glass appears to be “ tinted ” or have a

“rainbow” color. Is this defective?

| No. The inner oven glass is coated with a heat barrier to reflect the heat back into the oven to

prevent heat loss and keep the outer door cool while baking.

| This is normal. Under certain light or angles, you may see this tint or rainbow color.
Sometimes the oven takes longer to preheat to the same temperature| Cookware or food in oven| The cookware or food in the oven will cause the oven to take longer to preheat. Remove items to reduce preheat time.
Number of racks in oven| Adding more racks to the oven will cause the oven to take longer to preheat. Remove some racks.
Different cooking modes| The different cooking modes use different preheat methods to heat the oven for the specific cooking mode. Some modes will take longer than others (i.e. convection bake multi).
Oven will not work remotely| Router issues, no wireless signal, etc.| For assistance with oven wireless network connectivity, please call 1-800-220-6899.
Oven is not connected.

MONOGRAM LIMITED WARRANTY

Monogram.com
All warranty service is provided by our Factory Service Centers or an authorized Customer Care® technician. To schedule service online, visit us at monogram.com/contact. In Canada, visit monogram.ca.
Servicing your appliance may require the use of the onboard data port for diagnostics. This gives a Monogram Factory Service technician the ability to quickly diagnose any issues with your appliance and helps Monogram improve its products by providing Monogram with information on your appliance. If you do not want your appliance data to be sent to Monogram, please advise your technician NOT to submit the data to Monogram at the time of service.

purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the appliance that fails because of a manufacturing defect.

What Monogram will not cover:

• Service trips to your home to teach you how to use the product.
• Improper installation, delivery or maintenance.
• Failure of the product if it is abused, misused, modified or used for other than the intended purpose or used commercially.
• Replacement of house fuses or resetting of circuit breakers.
• Damage to the product caused by accident, fire, floods or acts of God.
• Incidental or consequential damage caused by possible defects with this appliance.
• Damage caused after delivery.
• Product not accessible to provide required service.
• Service to repair or replace light bulbs, except for LED lamps.

EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by an Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized Service location. In Alaska, the limited warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: GE Appliances, a Haier company Louisville KY,40225

ACCESSORIES

Looking For Something More?
Monogram offers a variety of accessories to improve your cooking and maintenance experiences! Refer to the Consumer Support page for phone numbers and website information.
The following products and more are available:

• Accessories
  • XL Broiler Pan (17″ x 1 ¼” x 19 1/4″)
• Parts
  • Oven racks
  • Oven elements
  • Light bulbs
  • Probe

References

• FoodSafety.gov
• Connect Your Smart Appliances
• Monogram Appliances
• Monogram Appliances
• Monogram WiFi Connected Kitchen | Monogram Smart Kitchens
• 800-626-2000 - Email, Chat or Call" class="nturl" > Contact Monogram - 1-800-626-2000 - Email, Chat or Call
• monogram.com/register
• Official Monogram Appliance Parts & Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>