Meditub 2739 White Walk In Bathtub Instruction Manual
- May 15, 2024
- MediTub
Table of Contents
Meditub 2739 White Walk In Bathtub
Specifications
- Model: 2739 Walk-In Bathtub
- Dimensions: 27 x 39 inches
Available Therapy Systems
- 2739**S – Non-Jetted Soaking
- 2739**H – Whirlpool Jetted
- 2739**A – Air Jetted
- 2739**D – Whirlpool & Air Jetted
- Walk-in Type: Walk-in
- Material: Acrylic
- Soaker Weight: 120 lbs
- Jetted Weight: 155 lbs
- Average Fill Capacity: 50-60 gallons (Estimated with occupantinside, actual capacity may vary)
Installation :
- Ensure the tub is completely level with all leveling feet touching the floor for proper functionality.
- Follow the electrical service requirements based on the therapy system chosen.
Filling and Draining
- Fill the tub with water up to the desired level using the designated water source.
- To drain the water, locate and open the drain valve or plug as per the bathtub design.
Cleaning and Maintenance
- Clean the bathtub regularly using a mild, non-abrasive cleaner to prevent buildup and maintain hygiene.
- Check and maintain the therapy system components as per the manufacturer’s guidelines.
Safety Precautions:
- Always follow the electrical safety guidelines provided in the manual.
- Keep the area around the bathtub dry to prevent slips and falls.
FAQ
Q: How do I register my product?
A: Visit SWCORP.com/register within 5 business
days of delivery for more information.
2739 WALK-IN BATHTUB 27” x 39”
- Walk-in Type: …………………………………Walk-in
- Material: …………………………………………Acrylic
- Soaker Weight: ……………………………… 120 lbs
- Jetted Weight: ………………………………. 155 lbs
- Average Fill Capacity*: ………………… 50-60 gal
*Estimated with occupant inside. May vary based on occupant’s volume.
Required Electrical Service 110v
- Air Bath or Whirlpool ……………………. 1x 15 amp GFCI
- Whirlpool w/ Inline Heater ………….. 1x 20 amp GFCI
- Whirlpool & Air Jetted ………………….. 1x 20 amp GFCI
- Soaker …………………………………………….. n/a
Available Therapy Systems
- 2739**S ………………………….Non-Jetted Soaking
- 2739**H …………………………Whirlpool Jetted
- 2739**A …………………………Air Jetted
- 2739**D …………………………Whirlpool & Air Jetted
Key Measurements (inches)
- Overall Outer: ……………….39 x 27 x 37
- Interior Width: ………………20
- Standing Area: ……………..19 x 17
- Seat Width: ……………………20
- Seat Height: ………………….14
- Soaking Depth: …………….29
- Drain to Side Wall: ……….7
- Drain to Back Wall: ……….13
- Step-in Height: …………….7
- Door Clearance: ……………n/a
- Faucet Deck: ………………….4
- Tile Flange: …………………….n/a
- Extension Kit: ………………..n/a
It is vital that tub is completely level with all leveling feet touching the floor for the door, seal and drain to work properly
Compliance : Uniform Plumbing Code UPC®;; International Plumbing Code
IPC®; ADA
Standards : ASME A112.19.15; CSA C22.2 No. 218.2-15; UL 1795, 5th Edition
Issued September 02, 2016 including revisions through August 25, 2017
Certifeid : UPC,EGS
- IMPORTANT! TEST THE TUB’S DRAIN AND JETS (if any) BEFORE PERMANENT INSTALLATION!
- INSPECT THE TUB WHEN RECEIVED! Report any damages or missing parts within 5 business days of delivery date.
- Before ordering or installing, please consider future access to equipment.
- Please measure tub on-site before building tub surrounding!
- Jet, pump & blower locations are predetermined and cannot be changed.
- Tub door must remain closed when not in use.
- Measurements are subject to a +/- .5” variance and subject to change without notice.
- Measurements here in supersede all other published specs prior to publication date shown below.
- Inline heater (if included) is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
- Product must be registered for warranty activation. See user manual or visit SWCORP.com/register for more information.
v5 / 201905. All rights reserved. Subject to change without notice.