ACEFAST FA001 ACEFIT Pro Wireless Earbuds User Guide

ACEFAST FA001 ACEFIT Pro Wireless Earbuds

Product information

• Device activation: when using it for the first time, please remove the protective sticker of the earbuds and put the earbuds into the charging case to complete the activation.
• Thank you for purchasing this product.
• Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Parameter

Product list

Instructions for use

The left and right earbuds are paired successfully by default when the product leaves the factory. Follow the steps below when connecting to the phone for the first time.

1. Take out the earbuds to automatically turn on, and wait for about 3 seconds, the earbuds will be automatically paired.
2. Turn on the BT of your phone, search for ACEFAST ACEFIT Pro, and click to connect. After the pairing is successful, you will hear a tone and your phone will show that it is connected.

When you use it again, after the earbuds are turned on and paired, it will automatically connect back to the connected mobile phone. If you cannot connect to the mobile phone, please manually connect to the earbuds from the BT menu of the mobile phone.

Prompt:

• When the earbuds are connected to the device, to avoid the failure of the connection between the left and right earbuds, the earbuds need to be taken out of the charging case at the same time.
• You have o minute to connect the earbuds and your device, otherwise, the earbuds will automatically shut down. Put the earbuds
• You have 5 minutes to connect the earbuds and your device, otherwise the earbuds will automatically shut down. Put the earbuds back into the charging case to re-enter pairing mode.
• Power on without any device connected, it will automatically shut down after 5 minutes.
• The left and right earbuds can be used separately.
• If the palling calls for a long time, please put the earbuds back into the charging case for reconnection,
• If the pairing fails for a long time, please put the earbuds back into the charging case for reconnection.
• If there is no sound after the left and right earbuds are connected, please put the earbuds back into the charging case for reconnection.

Operation mode

Operation mode (calls)

Operating instructions (Answering/Ending calls)

1. Power on: I Remove the earbuds, the earbuds will turn on automatically, & Single touch the multi-function button in the off state. The earbuds enter the BT pairing state after power on, and the LED light starts flashing
2. Shutdown: put earbuds into the charging case to automatically shut down.
3. Answer a call: when an incoming call, double-touch the multi-function key.
4. End call: during a call, double-click the multi-function key.
5. Reject the call: when there is an incoming call, long touch the multi-function key for 2 seconds.

Operation mode (playing music)

1. Play music: double-click the multi-function key or operate the player on your cell phone (some cell phones will automatically start the music player when connected to a BT stereo).
2. Pause music: Double tap the multi-function key or operate the player on your cell phone while playing music.
3. Next song: triple-click the right earbud multi-function key while playing music.
4. Previous song: triple-click the left earbud multi-function key while playing music.
5. Volume +: Click the right earbud multi-function button, there will be a beep when the maximum volume.
6. Volume-: Click the left earbud multi-function button, there will be a beep when the minimum volume.
7. Wake up voice assistant: Long touch the left/right earbuds’ multi-function button for 2 seconds.

Factory reset: With the earbuds in the charging case and the lid open, press and hold the charging case button for 5 seconds to clear the pairing records of the earbuds.

Due to the characteristics of RT earbuds, electromagnetic wave interference in the area mav cause connection interruptions or freezes. Based on the characteristics of wireless technology, when the device performs the display function and transmits the BT sound signal at the same time, there may be a “delay’ in the audio signal and the video signal, that is, the sound is not synchronized with the picture.

Operation method (charging)

Digital display:

• LR and four power grids indicate the left and right earbuds’ power level, when the earbuds are put into the charging case, the digital screen display will turn off after 15 seconds.
• When the earbuds are in charging status, the power grid will flash; when the earbuds are fully charged, the power grid will display normally.

1. 0~25%
2. 26%~50
3. 51%~-75
4. 76%~100|

• When the earbuds are put into the charging case, the digital display area will instantly show the current power level of the charging case.
• When charging the charging case, the digital screen of the charging case will light up, the end of the power level will flash, and the display will show OK when the power level is full.

Precautions for charging:
Use a charger with an output voltage of DC 5V, a USB port of a PC, or a charger with a USB port output (must choose a charger that has been certified by a manufacturer).

Tips:

• This product contains a built-in rechargeable lithium battery, please read the battery safety warnings.
• It is forbidden to hit, squeeze, or throw into fire. If severe swelling occurs, please do not continue to use it. Do not place it in a high temperature environment. It is forbidden to use the battery after it is immersed in water.
• Do not try to remove the battery from the earbuds to avoid damage to the earbuds.
• The earbuds will automatically consume power when it is shelved. It is recommended to charge the earbuds every 3 – 6 months.

Precautions

• Do not place the earbuds in a place that is humid, full of dust, oily smoke, or steam, or exposed to direct sunlight. Do not leave the earbuds in the car for a long time. Otherwise, it may cause a malfunction.
• Using this earbud to listen at a high volume may affect your hearing. For traffic safety, please do not use this earbuds while driving or cycling.
• Do not use earbuds in places where the inability to earbuds environmental sounds will cause danger, such as railway crossings, railway station platforms, pedestrian crossings, and construction sites.
• Do not place heavy objects or apply pressure on the earbuds, otherwise, it may cause deformation of the earbuds during long-term storage.
• The static electricity accumulated in the body may cause slight irritation in the earbuds. Wearbudsing clothes made of natural materials can minimize the impact.
• Do not subject the earbuds to excessive impact.
• Please use a soft dry cloth to clean the earbuds.
• Do not expose the earbuds to water. The earbuds are not waterproof. Remember to observe the following precautions.
  • Be careful not to let the earbuds fall into the sink or other containers filled with water.
  • Do not use the earbuds in humid places or bad weather, such as rain or snow.
  • Do not get the earbuds wet. If you touch the earbuds with wet hands or put the earbuds in damp clothing, the earbuds will get | wet and this may cause the earbuds to malfunction.
• Because the product is magnetic, keep it away from electronic products such as bank cards, mobile phones, computer monitors, TVs, etc.
• If you feel unwell after using the BT device, stop using it immediately. If the problem persists, please contact your local dealer.
• If you have any questions or problems about earbuds that are not covered in this manual, please contact your local dealer.
  • When you feel uncomfortable wearing the earbuds or the sound is blocked, you can choose other types of concha hook prepared for you, which will bring you a better wearbudsing experience and high-quality sound quality.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  • FCCID: 2AZXT-AF2106

Contact Information

• Shenzhen Houshuxia Technology Co., LTD
• www.acefast.com
• support@acefast.com
• Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, P. R. China Shenzhen, 518000, China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>