HYUNDAI MOBIS UWB Module Instructions
- July 11, 2024
- Hyundai Mobis
Table of Contents
Product overview/UWB Module
The device mounts on the vehicle and communicates with the keyfob (or supported smartphone) via UWB.
HOW TO OPERATE
It is installed in the designated location of the vehicle and operates according to the designated CAN command.
RODUCT INSTALLATION LOCATION
Bumper, Head lining, Trunk etc.
SPECIFICATION
Standards| UWB(Ultra Wide Band)
– CCC Digital Key Phase3 Specification
– IEEE 802.15.4-2015
– IEEE 802.15.4z
---|---
UWB Ranging Distance| Max. 10m(LOS/Line of Sight conditions, between Devices)
Power voltage| 12V
Dimension(mm)| 92.70 x 49.93 x 18.15
Dimension
- PIN MAP
| No. | PIN NAME |
|---|---|
| 1 | CAN_L |
| 2 | CAN_H |
| 3 | SUB_ID2 |
| 4 | SUB_ID1 |
| 5 | GND |
| 6 | GND |
| 7 | SUB_ID0 |
| 8 | B+_POWER |
- Electrical Characteristic
| Min| Typ.| Max| UNTI
---|---|---|---|---
Supply Voltage| 9| 12| 16| V
Operating Temperature| -40| –| 95| °C
Storage Temperature| -40| –| 95| °C
- Product Specification
| Name of company | AMOSENSE CO.,LTD. |
|---|---|
| Equipment / Model Name | UNIT ASSY-ULTRA WIDEBAND / ASUWBM06 |
| Identification Code | Amo |
| Year of manufacture | Separate mark |
| Manufacturer / Country | AMOSENSE CO.,LTD. / KOREA AMO VINA CO.,LTD. / Vietnam |
| Operation Frequency | CH.5: 6.4896GHz |
CH.9: 7.9872GHz
POWER
(Mean Power Density)| TBD
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device should be installed and operated with minimum 20 cm between the
radiator and your body.
This device contains licence-exempt transmitter(s)/receiver that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:(1) This device may not
cause interference.(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment should be installed and operated with minimum 20 cm between the
radiator and your body.
Trade Name : HYUNDAI MOBIS Co., Ltd.
Trade Mark :
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>