Kenmore 758.144533 Whole House Humidifier Owner’s Manual

758.144533 Whole House Humidifier

“`html

Product Specifications:

• Model: 758.144533
• Capacity: 13 Gallon
• Type: Whole House Humidifier
• Output: 13 Gallons
• Technology: Innovative Twin Fan Technology

Product Usage Instructions:

General Safety Instructions:

It is important to follow the safety instructions provided to
ensure safe operation of the humidifier. Here are some key safety
guidelines:

1. Read all instructions carefully.
2. Keep the humidifier clean.
3. Avoid putting foreign objects inside the humidifier.
4. Never use the humidifier with any part missing or damaged.
5. Avoid touching controls with wet hands.

Assembly:

Before using the humidifier, make sure to assemble it properly
by following the assembly instructions provided in the manual.
Ensure all parts are securely in place before operating the
unit.

Humidifier Operations:

To operate the humidifier:

1. Plug the humidifier directly into a 120V, A.C. electrical
   outlet. Avoid using extension cords.

2. Keep the electric cord away from traffic areas and potential
   hazards like heat sources.

3. Always unplug the humidifier before moving, cleaning, or
   servicing it.

4. Follow the manufacturer’s recommendations for filling the
   humidifier with water.

FAQ:

How often should I clean the humidifier?

It is recommended to clean the humidifier regularly, at least
once a week, to prevent mold and bacteria buildup.

Can I use essential oils in this humidifier?

Avoid using essential oils or any other additives in the
humidifier as they can damage the unit and void the warranty.

What should I do if the humidifier stops working?

If the humidifier stops working within the warranty period,
contact Sears for repair or replacement options as per the warranty
terms.

“`

This Owner’s Manual is provided and hosted by Appliance Factory Parts.
Kenmore 144533 Owner’s Manual
Shop genuine replacement parts for Kenmore 144533
Find Your Kenmore Humidifier Parts – Select From 496 Models ——– Manual continues below ——–

f/_ Save This Manual for Future Reference
owner’s manual
Model No.
758.144533
13 Gallon

COMFOR

FOR YOUR S_AFETY
READ ALL INSTRUCTIONS
CAREFULLY

WHOLE HOUSE HUMIDIFIER
13 Gallon Output
Innovative Twin Fan Technology
· Operating Instructions · Parts List

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Part No. SP6167

Printed in Canada

FULL ONE YEAR WARRANTY ON HUMIDIFIER

If within one (1) year from the date of purchase, this humidifier fails due to a defect in material or wQrkmanship, Sears will repair it, free of charge. If within two (2) years from the date of purchase, the motor fails due to defect in material or workmanship, Sears will repair it free of charge.

This warranty service is available by simply returning the humidifier to the nearest Sears Service Center/Department throughout the United States.

This warranty applies only while this product is used in the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., 13/8t7 WA, Hoffman Estates, IL 60179

_1

GENERAL SAFETY INSTRUCTIONS

Safety Signal Words
DANGER: means if the safety information is not followed someone will be seriously
injured or killed.

humidifier is not in service.
4. Keep the humidifier clean. 5. Do not put foreign objects inside the
humidifier.

WARNING: means if the safety information is not followed someone could be seriously injured or killed.
CAUTION: means if the safety informa-

6. Never use your humidifier while any pa is missing or damaged in any rnanne,_
7. To reduce the risk of electrical hzard ……. 0:damage,.t.humidiSer..ot.t, ijl:?

tion is not followed someone may be seri-

or tip humidifier while unit is running,i, i

ously injured.

-8:’To”reduce’the’risk” of’datl”Pa_’tO

1. To reducethe risk offire or shock hazard,

humidifier,unpluQ humidifier, wher_’,:f

plug humidifier directly into a 120V, A.C. “…….. w’_a’fE_se”-“oalr”s””=.my,_’r,”when ”

electrical outlet. Do not use extension

the humidif._,L_Jt,i’ilv. _- ] -,,-.-..,-.

cords.
2. Keep the electric cord out of traffic areas. To reduce the risk of fire haz-

9. To reduce the risk of accidental …… -cal_shock’;,’do’notloucITt_d
controls with wet hands.

elctri, or ‘ , ,”

ard, never put the electric cord under 10. Note the warning label shown below ·

rugs, near heat registers, radiators,

..—and on-the humidifier: ………….

stoves or heaters.
3. Always unplug the humidifier before moving it, removing the housing section, before cleaning, or whenever the

WARNING: To reduce the risk of firs, electric shock, or injury always unplug before filling, servicing or cleaning.

II

Table’of Contents

Warranty Information ……………………….. 2

General Safety Instructions ………………. 2 To Save a Service Call ……………………… 2

Know Your Humidifier ………………………. 3

Humidifier Operations ………………………. 4

Assembly ………………………………………..

4

Location Instructions ……………………… 4-5

Electrical Hook-Up …………………………… 5

Water Fill ……………………………………..

5-6

Operating Humidifier Controls …………… 7 Using Your Humidifier ………………………. 8 Operating Tips for Best Performance…. 8 Replacement and Care of Filters …… 9-10 Cleaning of Humidifier ………………. 11-12 Trouble Shooting ……………………………. 13 Repair Parts …………………………….. 14-15

To Save a Service Call

Check following if your humidifier will not operate_ 1. Is power cord attached to outlet? 2. Is there electrical power to outlet?

3. Is airflow control in operating position? 4. Is humidity control set high enough? 5. Is the cabinet setting on a level surface?

Know Your Humidifier

Fill Light

Controls

Operating Light

Bottles

Filter Support
Filters Replacement Filter 42-t4911

Description
Gallon Output/24 Hrs. Capacity of Bottles Sq. Ft. Coverage Run Time Fan Speeds Filters
Fill Light Water Level Indicator Auto Humidistat Controls
Operating Light U.L Listed AHAM Certified Volts Hertz Amps Watts

Control Panel Cover & Pivoting Lid Removed for Clarity

758.144533

13 2-3/8 Gallons 2700 48 Hours Variable
4 Yes Yes Yes Rotary Yes Yes Yes 120 A.C. 60
2.88 165

Each

Humidifier Operations

Your new Sears humidifier is designed to satisfy home humidity requirements
through the principle of evaporation of water into the air.

Humidified Air is Then Released
Through the Top

After water is added to the bottles, the fil-
ters begin to soak up the water and become totally saturated in approximately 30 minutes. Air is drawn in from
the rear of the humidifier, then passes through the filters by means of two circulation fans. As air passes through the filters, moisture is absorbed into the air and
then released through the top of the humidifier. This moist air is released in the

Dry Air Enters ..:-; –:..”. Through the
Rear

form of vapor. No water droplets will enter the home. All evaporation into the air takes place in the humidifier, which means that the residue left by evaporating water is not passed into the home, but remains in the filter.
CAUTION: Use only 42-14900 EPA Registered Bacteriostat available from SEARS Retail store. Under no circumstances should you use water treatment products designed for Roto belt or Ultrasonic humidifiers.
Assembly

CAUTION: .Keep your humidifier clean. While humidifiers do not cause
colds, some studies suggest that dirty humidifiers can cause cold-like
symptoms in some people. To reduce the risk of this, we recommend you clean your humidifier weekly with Humidifier Cleaner 42-14713 and use Bacteriostat 42-14900. These are
available at your local Sears store.

Your new Sears Kenmore humidifier is

instructions of this owner’s manual for

completely assembled for you to use. Remove the packaging material from inside your humidifier and follow the

proper usage. The packaging material is located under the fan assembly. Remove the packaging material and discard.

Location Instructions

WARNING: For your own safety, do not use humidifier if any parts are damaged or missing.

Icabinet) may not sense the water and the fill light will be on and the unit will not energize, if this happens, the unit will

Step I Place humidifier on a fiat level _urface in

need to be leveled in order for the humidifier to be energized.

area of house where most humidity is needed, or one which would likely result in moist air being circulated throughout the house such as near a cold air return.

NOTE: It may be necessary to purchase leveling coasters from your local hardware store. The coasters should be positioned under the front two casters of the humidifier.

P.lacing the unit level is very important if the humidifier is located on carpeting.
NOTE: The 13 gallon humidifier contains water bottles, the weight of the bottles in the front of the cabinet may sink the casters deeper in the carpet. This will keep the wate_evel forward in the cabinet. The

Moist air (humidity) produced will disperse into the whole house, but area closest to
unit will have the highest humidity. If the unit is positioned close to a window, con-
densation may form on the window pane. If this is not appropriate the unit should be repositioned in another location.

water level float (located at the rear of the

4

Location Instructions (continued)

NOTE: Due to release of cool, moist air from humidifier, it is best to direct air away from home thermostat and hot air registers. It is best to position humidifier next to an inside wall. Hot air registers and cold air from outside walls can affect the efficiencies of the controls. Unit should not be placed where warm air from a hot air register blows directly on unit.
Step 2 The humidifier should be positioned with the back (cord exit side), at least 2 inches away from the wall. Air needs to enter through louvers in the rear panel in order for the humidifier to operate at peak efficiency.

At Least 2″ From Wall

Electrical Hook-Up
Locate nearest 120V A.C. wall socket in the location desired, preferably on inside wall. Plug in the electrical cord.

or shock hazard, humidifier should I bDeoARpnlNoutIgNgGues:de Teionxttoernedsaiuoc1ne20VtchoAerd.Csr.i.skouotflefti.re

Water Fill

WARNING: To reduce the risk Of shock, always unplug humidifier before filling, cleaning, or servicing.

Pivoting Lid Removed for Clarity

W’A]_I_ING: To reduce the risk of fire
or shock hazard, do not_pour or spill water into control or motor area. Close the control cover. If controls
get wet, let them dry completely and have unit checked by authorized service personnel before plugging in.

This humidifier is designed to be used with the two water bottles that are located
under the pivoting lid. Op_the pivoting lid of the humidifier. Remove the water bottles, lift them straight up and out of the cabinet.
5

Water Fill (continued)
Notice the water bottles are designed as right and left hand units. Position them in the correct location so the humidifier can function properly. The water bottles should rest in the front of the cabinet. Each “E-Z-Fill Side- Cap” must be facing the rear of the unit.
Each water bottle is designed with an “E-Z-Fill Side-Cap” that is easily removable. Remove the “E-Z-Fill Side-Cap” on the side of the water bottle by twisting counterclockwise.

Rear of Humidifier
“E-Z-Fill Side-Cap” Should Always Face Rear
Turn Counterclockwise to Remove Cap

Place the opening of the water bottle under a water faucet (the bottle should fit under a four-inch clearance faucet). Fill with recommended mixture of cold water and Sears Bacteriostat #42-14900 only. Solid debris could make the valve leak.
Install the “E-Z-Fill Side-Cap” by twisting clockwise. Hand tighten only. Check for possible leaks by performing the following: 1. Grasp bottle handle and hold the bottle
upright over a sink. 2. Press up on valve cap plunger for about
one second to let out a little water.
3. Release the plunger. 4. Listen for air bubbles. Look for leaks
around =E-Z-Fill Side-Cap”. 5. If you ear air bubbles or see leaks,
retighten “E-Z-Fill Side-Cap” and repeat steps 1-4. Wipe off excess water from the bottle. Position the water bottle back into the unit. Grasp the water bottle handle, and lower into the cabinet until the bottle sits on pads at bottom of cabinet. The “E-Z-Fill Side-Cap” must be facing the rear of the cabinet. When positioned properly, the plunger will open and water will flow into the cabinet. The water level will automati-
cally re at approximately 1/2″ until the bottles are empty. The unit is now ready for operation.

‘ Valve Cap Plunger
Pivoting Lid Removed ) / for Clari_
°

6

Operating Humidifier Controls

The operating controls of your Kenmore Quiet Comfort Whole House humidifier are located on the top center of the humidifier. The controls are found under the smoked cover, located between the air circulating fans. Lift the control cover by placing your finger in the round cutout and lifting. The cover will stay open. Now you can clearly see the control area. Familiarize yourself with the controls and reference the dia-
gram of the control area for the correct naming used in this manual.

Fan Control
Your Kenmore Quiet Comfort Whole House humidifier allows a choice to be
made for single or dual fan control. The slide switch allows one or two fans to be
used. Slide the switch to the “1” position to operate one fan and the “2° position to operate both fans. The benefits of two fans and two control
settings to the customer are summed up in the name, “QUIET COMFORT WHOLE HOUSE HUMIDIFIER”. The “FAN” slide

To Operate the Controls Humidity Control:
Adjust the amount of humidity depending on your needs. The humidifier will turn on and off as required to maintain level of humidity selected. MEDIUM setting is recommended, but there are times when low or high amount of humidity may be preferred. For constant operation of humiditier, MAX allows for the maximum amount of humidity to be evaporated into the air continuously.
IMPORTANT: Water damage may result if condensation starts to form on windows

switch, positioned in the #1 position will operate the humidifier with one fan only in any speed position and provides reduced output at a lower noise level. The “FAN” slide switch positioned in the #2 setting will operate the humidifier with both fans and provides greater output than the single fan settings. Maximum output is provided by the humidifier in the #2 position with the speed control set at high. This allows an infinite number of fan/speed settings, to determine the noise level and out _ut level that best suits you.
QuietComfort13

or walls. Humidity Control setting should

be lowered until condensation no longer

forms.

HUMIDITYM_

Power Light
MAX

When the unit is turned on, the power light

will come on. It will stay on until the unit is turned off or unplugged.
Fill ‘t:i lht
When the unit has a small amount of

OFF SPEED

water left in it, the fill light will come on
LOW
and the unit will automatically shut off.

Speed Control

The unit is adjusted from “OFF” to high to low with a variable speed control. The higher the air flow speed, the more water is evaporated and released into the air. Low speed is the quietest and is provided for conditions that may not require as.l_jh an evaporation rate.

POWER FANS

7

Using Your Humidifier

Step 1 Be sure unit is full of water and plugged in.
Step 2 Set the Fan selection switch to “2”. This will allow both fans to operate if the humidistat senses humidity is needed.
Step 3 Set speed control to low.
Step 4 Set Humidity Control to medium position.
NOTE: Humidifier should operate with humidity control on the recommended MEDIUM setting. If it does not, the humidity is at a relatively high level. To test the unit under this condition, turn Humidity Control all the way to MAX and unit should begin to operate. After unit has been tested, set Humidity Control to MEDIUM or desired level.

Step 5
If humidifier stops running, the humidity level is at the normal requirements for that setting or it is adjusting to the home conditions. The table below shows approximate relative humidity percentages which correspond to the various settings of the Humidity Control.

When Outdoor Temperature is:

Recommended Indoor Relative
Humidity is:

-10°F 0°F 10°F
20°F & above

20% 25% 30%
35%

Allow 24 hours for humidifier to adjust.
If humidity level in home is sufficient, the humidifier will only operate with Humidity Control set on maximum.
IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity Control setting should be lowered until condensation no longer forms.

HUMIDITY MIN

MAX

Operating Tips for Best Performance

1. Position the humidifier at least 2 inches
from-a_y_vall and away from any heat registers.
2. Do not restrict airflow from entering or exiting the humidifier.
3. Use Sears recommended bacteriostat
42-14900 to retard bacteria growth that may cause odors and may be harmful to your health.

4. Regular cleaning as instructed in “Cleaning of Humidifier” section of this manual is recommended.
5. Replacement of the evaporative wicking filter at least once per humidification season or more depending on water conditions in your area.

8

Replacement and Care of Filters

shock or injury from moving parts, always unplug humidifier J WbeAfoRrNeINGre:movTiongreduocrerepthlaecinrgisk aonf y parts.
CAUTION: To help retard bacteria growth and keep maximum efficiency, the filters should be replaced at least once a season, or more often under hard water conditions. Use Sears recommended
replacement filter.
All filters may be rinsed in clear water only. Take care not to damage paper. To replace the evaporative wicking filters in your Kenmore Quiet Comfort Whole House humidifier, follow the instructions below. 1. Unplug humidifier, and proceed to
clean. Before removing the filters, we recommend moving the humidifier to an area where floor coverings are not susceptible to water damage, i.e. kitchen or bath areas. 2. Open the pivoting lid and remove water bottles and set aside. Grasp the fan assembly front center and rear center. Lift off and set aside on a clean fiat surface. The filter assemblies are now accessible..
3. Lift filter housings out of cabinet and place where you may work on them comfortably. With a soft, absorbent
clo_ remove any remaining water or loose mineral deposits not trapped in the filter from the humidifier cabinet.
4. To open filter housing for easy access to filters: a. Deflect the two spring tabs on top of filter housing. Lift top cover off of the filter housing and set aside. b. Remove the two filters and dispose of properly. Clean internal parts of humidifier per the “Cleaning of Humidifier” section of your owner’s manual.

Spring Tabs

9

Replacement and Care of Filters (continued)

c. Install new tilters in the tilter housing track with the glue beads of the wicking pad to the inside of the filter housing.
d. Return the top cover of the filter housing by installing the cover over the fixed tabs on the rear of the
lower tilter housing and pivoting the cover down over the top of the filters. Snap the cover over the two spring tabs. e. Replace the tilter housing in the cabinet. Note: There is a left and a
right tilter housing. There is also a front and back orientation. To position the filter housings correctly:
· Make sure the two indents in the cylinder section of the top covers are positioned towards the center of the cabinet.
· Be sure that the spring tabs of fil-
ter housings are towards front of cabinet.
· Align the lower portion of the filter assembly over the six ribs located at the bottom rear of the humiditier cabinet.
fo Position fan assembly onto the cabinet. Make sure the fan venturi (lowest cylinder section below the fan) is placed inside the tilter housing.
g. Replace water bottles. h. Close the pivoting lid on the fan
assembly. i. The unit is ready for use or to be
“stored away for next season. NOTE: For correct operation of the filter housing assembly, tilters n_ust be fully contained inside the flange of the top cover.

Spring Tabs

Fixed Tabs
Filter

Front of Humidifier
Top Cover

Rear of
Indents Towards Center
Cabinet

Flat Portion of Filter Housing Towards Back of Cabinet

Indents Toward Center of Cabinet Step 4.e.
1o

Cleaning of Humidifier

CAUTION: To reduce the risk of
injury, fire or damage to humidifier, use only cleaners specifically recommended for humidifiers. Never
use flammable, combustible or poisonous materials to clean your humidifier. To reduce the risk of
scalds and damage to humidifier, never put hot water in humidifier.
CAUTION: Local water purity may vary from area to area and under certain conditions water impurities and airborne bacteria may promote the growth of microorganisms in the reservoir of a humidifier.
To retard bacteria growth that may cause odors and be harmful to your health, use only Sears replacement filters. We also recommend using a EPA approved bacteriostat, 42-14900 and humidifier cleaner 42-14713, available at your local Sears store.

Step 2
To Remove Parts
a. Raise pivoting lid, remove the fan assembly which contains the motors and fans, and set aside. (See Repair Parts list.)
b. Remove the water bottles from the cab-
inet and remove the filter housings (see “Repair Parts” list for identification).
c. Lift the filter housing assemblies out of the cabinet and set to the side. Before removing the internal parts of the humidifier cabinet, we recommend moving the humidifier to an area where floor coverings are not susceptible to water damage, i.e., kitchen or bath area.
d. Remove the water level float from the humidifier cabinet. The cabinet should
be empty and the water reservoir is ready for cleaning. The water reservoir consists of the lower areas of the humidifier cabinet where the float filters

NOTE: If it is necessary to use approved bacteriostat, follow the directions correctly. The bottles of the whole house humidifier will hold 2-3/8 gallons of water each. Step 1
To make cleaning easier, the water reservoir should be empty and completely dried out. To accomplish this, use the following method: a. Allow the humidifier to run until the
autor0_atic shutoff turns the humidifier “OFF”.

are during normal operation time.
e. Empty Cabinet.
f. Proceed to °Bi-Weekly Maintenance” or “End of Season Maintenance”.
g. Remove old filters and dispose of properly. Continue to clean cabinet and internal parts as described on next page.
Step 3 Install new filters (purchase the correct evaporative wicking filter pads 42-14911 for your humidifier) into the location where the old filters were positioned. Install the

b. Unplug humidifier
WARNING: If humidifier is not unplugged, fan could start after housing is removed.
c. Follow instructions in step 2 below “To Remove Pads”.
d. After removing the parts, dry out the bottom of the humidifier cabinet.

filter housings with the new filters into the correct location. Position the fan assembly
II on top of the cabinet and return the humidifier to the desired location for use.
Refill humidifier bottles with fresh cool water and return them to the cabinet. Plug the unit into a 120 volt A.C. power outlet and set the controls per the “Operating Humidifier Controls” section of this manual.

e. Proceed to “Bi-Weekly Maintenance” or “End_of Season Maintenance”.

11

Cleaning of Humidifier (continued)

Bi-Weekly Maintenance

Removing Scale
1. Fill the water reservoir with one 8 oz. cup of undiluted white vinegar. Let solution stay 20 minutes.
2. Clean all interior surfaces with soft brush. Dampen soft cloth with undiluted white vinegar and wipe out the water reservoir to remove scale.
3. Rinse thoroughly with clean warm water to remove scale and cleaning solution before disinfecting the water reservoir.
4. Dust the fan assembly and outside surfaces with a soft cloth only.

Disinfecting
and Base

Water Reservoir

2. Empty water reservoir after 20 minutes. Rinse with water until bleach smell is gone. Allow unit to dry out completely.
3. Water bottles should be cleaned in same manner.
End of Season Maintenance
1, Follow bi-weekly maintenance instructions at end of humidification season or when humidifier will not be used for at least one week or more.
2. Remove and throw away filters.
3. Let humidifier dry completely before storing. Do not store with water inside cabinet or water bottles.
4. Store in cool, dry location. 5. Install new filters in clean humidifier
before next season begins.

1. Fill water reservoir with 1 teaspoon chlorine bleach in 1 gallon water. Let solution stay 20 minutes, swishing every few minutes. Wet all surfaces normally exposed to water.

12

Troubleshooting

Trouble

Probable Cause

Remedy

Unit will not run.

· Humidity level is too high · No power

Unit will not shut off. · Float is not free

· Raise humidistat setting · Check 120 volt power source
· Free float from obstruction

Unit will not dry out completely
I Bottles continue to empty.

· Water is present in the system
· High humidity or low temperature resulting in slow evaporation

· This is normal. A small amount of water remains in the cabinet.
· Allow unit to continue operation.

· Air is entering water reservoirs.

· Check “E-Z-Fill Side-Caps” to ensure tightness.
· Check for leak in water bottles.
· Are gaskets for “E-Z-Fill SideCaps” in place (see repair parts list).

Unit is not emptying.

· Dirty filter · Reservoir cap plunger
missing post in bottom of cabinet.

Unit runs and shuts ! · Humidity level is too high off before bottles are

empty

· Unit is not setup on a level

surface (Float will not sense water at the rear of the cabinet.

· Change to a fresh new filter. · Check orientation of bottle.
Reposition so that reservoir cap plunger is depressed by post in bottom of cabinet.
· Raise humidistat setting (if possible)
· Position unit level (Some carpet padding may allow unit to set lower in the front than the
rear with the additional weight of water bottles in the front of the cabinet. Install coasters under front casters.

CAUTION: Use only 42-14900 EPA Registered Bactedostat available from Sears Retail store.
Use of other water treatment products may damage the filter elements. Under no circumstances should you use water treatment products designed for Roto belt or Ultrasonic humidifiers.

13

,lb.

Parts List For Sears Humidifiers Model No. 758.144533

Key

t;

No.

Part No.

Ddscription

1 823884

Cover Dust

2 823730 3 823724-1 4 826544-1

Lid Stationary Lid Pivoting Knob

5 824117-1

Cap

6 826546

Label Control

7 826400

Cover Control

8 823910

Switch Slide

9 824691-2

Switch Variable Speed w/Off

10 825858

Light

ol

11 13805-02

Humidistat

12 823728

Switch Micro

13 826401

Enclosure Electronics

14 824101-1

Retainer Float

15 823712

Float Water Level

16 824690 17 824689

“E-Z-Fill Side-Cap” Bottle Left

18 824688 19 819024

Bottle Right Seal Valve

20 826011

Seal Cap

*Standard Hardware Item – May be purchased locally

Key

No,

Part No.

21 822419-2 22 819026 23 819027 24 823710-2 25 823726 26 STD601107 27 822120 28 823849 29 42-14911 , 30 823977 31 825918 32 823735 33 822405-7 34 822406-1 35 816069-2 36 822405-5 37 823714 38 825919 — SP6167

De
Cap Spring Valv Stem Valve Cabinet Rail Kick

• Scr, Pan Hd Caster Twin
  Support Fil t Filter Evapo
  Support Fil Gasket Foa
  Support Mo Motor Fan Scr Pan Hd Motor Support Filte Cord w/Plug Owners Man

t Stock item – May be secured thr Department of most SearF retail sto

Forthe repair or replacementpartsyou need Call7 am – 7 pmo7 days a week
1-800-366-PART
(1-800-366-7278)
For in-homemajor brandrepairservice (;all 24 hoursa day, 7 daysa week
1-800-4-REPAIR
(1-800-473-7247)

Forthe locationof a
Sears RepairService Centerin yourarea Call 24 hoursa day, 7 daysa week
1-800-488-1222

For informationon purchasinga Sears MaintenanceAgreementor to inquire
about an existingAgreement Call 9 am – 5 pro, Monday-Saturday
1-800-827-6655
SEARS

The model label.

America’s Repair Specialists
number will be found

on the Humidifier

identification

When requesting service or ordering parts, always provide the following information:

· Product Type · Part Number

· Model Number · Part Description

© 19″_J_Emerson Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Part No. SP6167

Form No SP6167

Printed in Canada 6/98

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Kenmore Humidifier Parts - Select From 496 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>