Lindab FRA Air Flow Regulator Installation Guide
- July 10, 2024
- Lindab
Table of Contents
Lindab FRA Air Flow Regulator Installation Guide
Installation instruction
Product
Dimensions
NB! Different flange types are available, see order code and dimension table below. a and b dimensions, see order code.
Dimension table
| Flange type | d mm | L mm | c mm |
|---|---|---|---|
| LS | 20 | 341 | 106 |
| RJFP20 | 20 | 341 | |
| RJFP30 | 30 | 342 | |
| RJFP40 | 40 | 343 |
Regulator type table
| Type | Regulator |
|---|---|
| FRA-D | VRU-D3-BAC |
| FRA-M | VRU-M1-BAC |
FRA in details
Declaration of incorporation of partly completed machinery leaflet
Front view
To avoid clogging of the measuring tubes, it is recommended to use FRA only in
applications with clean air, meaning free of dust, particles and similar
Mounting of FRA
Volume flow measurement
The accuracy of volume flow measurement depends on the flow conditions in front of the measuring cross. It is prefera ble to have a long straight duct section in front of the meas uring point, according to the table below.
If these recommendations are not followed, it will cause an unstable flow measurement and therefore higher inaccuracy in the regulation of the required air flow.
| Components | Recommended straight duct before unit |
|---|---|
| Bend | 3 x dh * |
| Tee-piece | 4 x dh * |
| Damper | 6 x dh * |
dh is the hydraulic diameter for a rectangular duct (and FRA),
dh can be calculated by using FRA dimension a and b:
dh = 2 x a x b / (a + b)
Example above showing top view of recommended straight duct distance between duct bend and a FRA.
Front view of FRA and dimension a and b.
Assembly – rectangular air duct systems:
Using LS-profile. Assembly instruction, please go to Lin dab Rectangular air duct systems, LS- profile.
Using RJFP-profiles. Assembly instruction, please go to to Lin-dab Rectangular duct systems, RJFP- profile.
VRA is prepared for insulation with 50 mm thick insulation material. VRA can only be installed with damper blades in a horizontal position.
You can find general information about air duct systems, theory and calculations following this link.
Balancing
Universal controllers UNI(-M) / SPR(-M) / FAS(-M)
Be limo Service Tool ZTH-EU|
Be limo PC-Tool MFT-P via ZTH-EU|
Be limo Assistant App with NFC|
Be limo Assistant App with Bluetooth via ZIP-BT-NFC|
Note *)| Mod bus/Benet/KNX settings can be done with ZTH-EU, PC-Tool, or Be
limo Assistant App
Note **)| Be limo Assistant App works with all Universal controllers.
Maintenance
Cleaning of measuring tubes
The visible parts of the product can be wiped with a damp cloth. Remove
pressure hoses and blow clean air into the aluminium pipes.
Do not blow into the plastic hoses mounted on the Be limo unit, as this can
damage the flow/membrane sensors.
Cleaning the measuring tubes
Please demount the hoses and use clean air to clean the hoses and measuring
tubes.
Mounting hoses
Put the hoses back followed by squeezing the black tightness rings back.
Mounting hoses step 1
Put the hoses back.
Mounting hoses step 2
Squeeze the black tightness rings back
Most of us spend the majority of our time indoors. Indoor climate is crucial to how we feel, how productive we are and if we stay healthy.
We at Lindab have therefore made it our most important objective to contribute to an indoor climate that improves people’s lives. We do this by developing energy-efficient ventilation solutions and durable building products. We also aim to contribute to a better climate for our planet by working in a way that is sustainable for both people and the environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>