AVIGILON OP-16EM Elevator Board User Guide
- July 10, 2024
- aVIGILON
Table of Contents
AVIGILON OP-16EM Elevator Board
What’s Included
Board Status LED
Overview
- Power input
- Reader Power LEDs
- USB port
- Board Status LED
- Board Power LED
- ADMIN button
- Relay LEDs 1 – 16
- Inputs 1 – 16
- RESET button
- Board ID LED
- OVERRIDE SWITCH terminals (future use)
Installing
-
Screw the included standoffs into the holes labeled ‘1’ on the back of the Elevator Board mounting plate.
-
Fasten the board to an enclosure by inserting the included mounting screws and washers into the back of the enclosure, and then screwing them into the standoffs.
-
Connect the Elevator Board to the Access Control Core using the included USB cable.
-
Connect the Elevator Board to the power supply using the included power cable.
Warning: Do not apply power during wiring. Ensure the power supply is unplugged until all wiring is complete. -
Apply power to the power supply.
Example: North American power cord and outlet
Connecting Readers and Elevator Buttons
- For each elevator floor, connect one of the signal wires from an elevator button to one of the relay ports.
- Wire the relays to an elevator controller with the corresponding NO or NC contact.
Note: The total output rating is 60VDC maximum, 1A @ 24VDC (resistive), 0.5A @ 125VAC (resistive).
Connecting Inputs
General-purpose inputs require a voltage between 3V and 24V.
Provisioning
Sign in to Alta Control Center, and follow the steps to add and configure the Elevator Board.
Certifications
CE, IC, FCC, MET, RCM, UL294, WEB
For More Information
Scan the following QR codes:
QuickStartGuide-OP-16EM-Rev3 2024, Avigilon Corporation. All rights reserved. AVIGILON and the AVIGILON logos are trademarks or registered trademarks of Avigilon Corporation. All other trademarks are the property of their respective owners. Unless stated explicitly and in writing, no license is granted for any copyright, industrial design, trademark, patent, or other intellectual property rights of Avigilon Corporation or its licensors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>