NEBO TRI-04-G_4K 2-Head Tripod Light Instruction Manual
- July 10, 2024
- NEBO
Table of Contents
NEBO TRI-04-G_4K 2-Head Tripod Light
INCLUDED
- 4,000 Lumen Tripod Light
- Carry Bag
- Power Transformer (4m Cable)
- 220v Domestic EU Adapter
- 240v Domestic UK Adapter
- 110v Site UK Adapter
SPECIFICATIONS
- Protection Class …………………………………III
- Protection Degree …………………………………IPX4
- Operating Temperature ……………………………………. (-10 – 40°C)
- Input …………………………………16.8V, 2.8A
- Illuminant …………………………………70W
- Lumens …………………………………4000lm
- Charging Time (AC) …………………………………..6 Hours (Approx)
- Operating Time …………………………………… 1.5 Hours (Approx)
- Battery Type …………………………………. Lithium Ion 14.8V, 4000mAh
- Dimensions (L/W/H) …………………………………920x 120 x 160mm (Closed)
- Weight …………………………………6100g
SAFETY PRECAUTIONS / MOVING AND STORAGE INSTRUCTIONS
- Prior to use, make sure the right voltage is available.
- Prior to each charge, make sure the light and mains supply cable are not damaged in any way. Never use the light if you find damage.
- Do not use the light in explosive environments in which flammable liquids, gases or dusts are present.
- Do not expose the fully immerse the light in water.
- Ensure that the tripod is always erected on a level surface to avoid risk of falling.
- LED lights are extremely bright. Do not look directly at the lamp.
- Do not attempt to dismantle or repair the light.
- Store the light inside the supplied carry bag whenever possible.
QUICK START GUIDE
For more information, detailed video instructions, and warranty registration, simply scan the QR code or visit NEBOlights.com.
IMPORTANT: Fully charge your NEBO 4,000 Lumen Rechargeable Tripod Light before using it for the first time.
USING INSTRUTIONS
CHARGING YOUR NEBO TRIPOD LIGHT
CHARGING YOUR FLOODLIGHT AT HOME:
- Connect the relevant Power Adapter cable to the Power Transformer (included). Plug the barrel plug into the AC Charging Port on the light.
- Charging will begin automatically.
- When fully charged, the charging indicator LED will indicate 100%.
- (Full charge could take up to 6 hours).
OPERATING YOUR NEBO FLOOD LIGHT
- By pressing the ON/OFF button once, the light will power on.
- Once light is on, by pressing again you can set the desired brightness level with the desired number of clicks. (100%, 75%, 50%, 25%) Press the ON/OFF button once more to power the light off.
- Pressing the Colour Temperature Button will switch the LED output from white (CCT4K) to warm (CCT7K) light.
SETTING UP THE TRIPOD LIGHT
- Pull the tripod legs out, then downwards until the tripod legs lock (You will hear a click).
- Once attached, insert the quick release bolt inside the Tripod base plate, the bolt will lock into position.
- To release the light, pull the Quick Release and lift the light upwards.
CLOSING DOWN THE TRIPOD LIGHT
- Pull the Leg Release Clamp on the tripod leg outwards, and push the tripod downwards.
- Now fold the three tripod legs back in towards the frame until the Leg.
- Release Clamp locks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>