MINISO BT2602 Bluetooth Speaker Instruction Manual
- July 11, 2024
- MINISO
Table of Contents
Bluetooth Speaker
Instruction Manual
Product Specifications:
Model No: BT2602
Connection Distance: 10m
Frequency Response: 100Hz-20KHz
Impedance: 4Ω
Charging Time: Approx 4 hours
Material: ABS+Silicone
Wireless Version: 5.3
Output Power: 3W
Speaker Driver: 50mm
Battery Capacity: 800mAh
Playing Time: Approx 8 hours
Size: 75.575.561.5mm
(1) Power On/Off: Long Press
(2) Play/Pause: Short Press
(3) Previous Track/ Volume Down: Short press to go to previous track and
long press to decrease the volume
(4) Make phone call: Short press to answer or reject the call
(5) Next track/Volume Up: Short press to go the next track and long press
to increase the volume
1. Wireless mode operation:
*Long press the power on/off button to turn on the speaker. Now it will automatically enter the wireless pairing mode and the blue light flashes quickly.
-
Make sure your phone (or other compatible device) has the wireless function on. Select “BT2602” from your mobile phone’s list of available wireless devices. When connected to a device, the speaker’s blue light will flash slowly.
-
Once paired to a device, the speaker will automatically connect to it when turned on, provided that the device is within its range and has its wireless function on.
2. Charging:
Use the charging cable provided to connect to the speaker to a compatible wall charger, computer, etc. During charging, the L ED indicator will be solid red. When the speaker is fully charged, the LED will turn off.
Made in China
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. if this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>