Yigaoxin SDM660 Wireless Carplay Box User Manual
- July 9, 2024
- Yigaoxin
Table of Contents
USER MANUAL
AI ADAPTER
SDM660
Interface
NOTE! Please follow the installation below if your car is equipped with a Type-C port for CarPlay.
User Interface
1. Clock
2. WiFi BT status
3. microphone
4. Bluetooth
5. setup
6. CarPlay
7. Home| 8. Back
9. Recents
10. Voice assistant
11. Back to factory system
12. Clear
13. Split screen
---|---
Fibocom SC218 series
46 Soc Module
Product advantages
- Supports multiple cameras and supports simultaneous operation of two cameras
- Support 4K@30fps Video recording and playback
- Support for MIPI DSI ( 2560×1600@60fps + 1080P@60fps Over DP)
- Integrated multi constellation GNSS receiver to meet the needs of fast and accurate positioning in different environments
- Comprehensive coverage of various network formats
- Support for dual USB
| Qualcomm Octa- core
---|---
| 2560 x 1600@60fps
| Wi-Fi 802.11 b/g/n
| BT 5.0 BLE
| Android 13
| GPS/GLONASS/Beidou
| Reference design and application development support
The SC218 series is a multi network LTE Cat 4 intelligent module launched by
Guanghetong. Based on the Qualcomm SDOM660 platform design, it adopts a high-
end eight core processor, integrates a high-performance graphics engine,
supports multichannel camera input, and can smoothly play 4K videos. The
module adopts LCC+LGA packaging, which is compatible with Guanghetong’s SS808,
$Q808, and SC128 series, making it convenient for customers to flexibly
develop terminal devices.
The SC218 series supports multiple standard long-distance communication modes
and dual band Wi Fi/BT close range wireless transmission technology, as well
as GNSS wireless positioning technology. SC218 is a pre installed and open
Android operating system with multiple extension interfaces such as
MIPI/USB/UART/SPI/IZ2C, making it the preferred solution for the core system
of wireless intelligent products.
The $C218 series of intelligent modules can be widely applied in industries
such as wireless intelligent payment, handheld, in car, smart home, smart
city, etc. It is a globally outstanding core system solution for wireless
intelligent products.
| Smart(LTE Cat 4) | SC218-EAU | SC218- NA | SC218-JP |
|---|---|---|---|
| region | Europe/Australia/Brazil/Asia | North America | Japan |
Basic characteristics
package| 148 LCC+ 133 LGA
CPU| Qualcomm’s SDM660, 4xKryo Gold 2.2(or 2.4)GHz + 4xKryo Silver 1.8GHz
GPU| A512 650MHz
Memory| 4GB LPDDR4X RAM;64GB UFS
size (mm)| A1x41x2.85
LTE FDD| B1/2/3/4/5/7/8/20/28| B2/4/5/7/12/17| B1/3/8/18/19/21/26/28
LTE TDD| B38/40/41| B41/48| B41
WCDMA| NA| NA| NA
GSM| NA| NA| NA
Wi-Fi| 802.11 b/g/n
BT| 5.0 BR/EDR/BLE
GNSS| GPS/Beidou/GLONASS
OS| Android 13
working voltage| 3.5~4.35V
operation temperature| -30°C – +75°C
weight| 9.6±0.1g
transfer rate
LTE FDD(Mbps)| Max 150(DL)/ 75(UL)
LTE TDD(Mbps)| Max 130(DL)/ 45(UL)
WCDMA(Mbps)| HSUPA: Max 11(UL)
HSPA+: Max 42(DL)
EDGE/GPRS(Kbps)| EDGE: Max 296(DL)/ 236.8 (UL)
GPRS: Max 107(DL)/ 85.6(UL)
video processing
Video Coding| 4K30: HEVC, H264, VP8, and MPEG-4
Video decoding| AK30 8-bit: H.264, VP8, and VP9, 4K30 10-bit: HEVC
interface
LCD| 1 set of 4-Lane MIPI DSI interface, supports up to 2K
1 set of DP interfaces, supporting DP1.4 and up to FHD/ WUXGA@60Hz
Camera| 2 sets of 4-Lane MIPI CSI interface, configurable as 4+4 Lane or
4+2+1 Lane
ISPx2 (I3MP+13MP or 24MP)
UART| 2 sets of 4-Lane MIPI_ CSI interface, configurable as 4+4 Lane or 4+2+1
LanelSPx2 (13MP+13MP or 24MP)
12C| Multiple sets of I2C interfaces can be used for peripheral devices such
as TP. Camera, Sensor, etc
USB| 2 sets of USB interfaces
A set of USB3.1 interfaces, backward compatible with USB2.0. USB3.1 supports
SS (5Gbps) mode and does not support software download; USB2.0 supports
HS(480Mbps) mode, backward compatible with FS and LS;
SDIO| Support software download; Support HUB extension USB OTG ,A set of
USB2.0 interfaces that only support Host mode
GPIO| 30 GPIOs
Speaker| 1W on 82 load in Class-D mode
Receiver| 1x Mono, AB
Mic| 2 x analog microphones
Handset| Stereo CLASS AB
USIM| 2 x SIM card,support dual-SIM dual-standby
Keys| Power on/off /Volume up /Volume down /Reset
authentication
Regulatory certification| ROHS/CE/REACH| FCC/ROHS/IC| ROHS/TELEC/JATE
Operator certification| NA| NA| NA
Industry certification| HF| NA| NA
*=Planned/Under Develooment
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Copyright ©. All rights reserved