SHADA 600739 Glass Tube Light User Manual
- June 8, 2024
- SHADA
Table of Contents
600739 Glass Tube Light
User Manual
Specifications
Art no| 600739011| 60074001| 60074101| 60074201| 60074301| 60074401| 60074101|
60074101
---|---|---|---|---|---|---|---|---
Power (W)| 20.5| 14| 7.5| 20.5| 14| 11.5| 7.5| 11.5
Input voltage (V AC)| 220/240| 220/240| 220/240| 230| 230| 230| 220/240|
220/240
LED Lumen output (Im)| 3.1| 2.1| 1.1| 3.1| 2.1| 1.7| 1.1| 1.7
Colore Temp.| 4| 4| 4| 6.5| 6.5| 4| 6.5| 6.5
(K)
Replaces| 58WILO/ 150 cm| 36W TLD / 120 cm| 18WTLD /60 cm| 58W TLD / 150 cm|
36WOLD 120 cm| 30WTLD / 90 cm| 18WTLD / 60 cm| 18WTLD / 90 cm
Liespan(h)| 50| |
dimensions (OxL mm)| 28x 1.512| 26.4×1212| 26.4×612| 26.4×1.512| 26.4×1212|
26.4×912| 26.4×612| 26.4×912
Glass tube with shatterproof PET safety-coating
Packaging contents:
1x LED tube
1x manual
1x LED tube starter
1x Type label sticker
General safety instructions
Please read the operating instructions for the LED tube before use. The
operating instructions are part of the product. They contain important notes
on start-up and handling o f the device. Always keep the enclosed operating
instructions so as to be able to look up in- formation. They must be enclosed
when passing the device on to third parties.
Safety precautions
The user must observe the safety notes and warn- ings in order to maintain
this status and to ensure safe operation. Please read the operating instruc-
tions before start up.
Avoid contact with high temperatures or vibrations, this may cause damage to
the tube. Do not immerse the enclosure i n t o water.
Never attempt to open the device other than de- scribed in this manual. The
LED tube cannot be repaired; this part must be immediately disposed in case of
a defect. Ensure sufficient ventilation of the device. Never cover it during
operation. Do not install in reach of children or animals.
Any other use of the device than described above can damage the product or
endanger the user due to e. g. short-circuits, fire or an electric shock. The
entire product may not be modified or adapted . Don’t touch the tube while in
use or after use until it’s cooled down. The tube must have an earthed
connection for safe operation.
These safety notes must be observed i n all cases! Any warranty claim is void
i n the case o f damag- es caused by non-observance o f these operating
instructions. We are not liable for consequential damages or for damages to
property or persons caused by non-observance of the safety notes and improper
operation o f the device.
Safe operation is not possible anymore, if:
- the LED tube has visible damages,
- the LED tube does not work anymore,
Installation instructions
Warnings:
- Product must be installed by a professional in- staller in accordance with regulations for electri- cal installations .
- Before installation , ensure the power is switched off.
- If you want to replace the LED tube within a lu- minaire which has an HF ballast (High frequent), contact your maker of the luminaire.
- This LED-tube is AC powered from 1 single side, please note the remarks on the tube and scheme below for correct installation.
- The LED tube contains an internal fuse (250V 2A) for protection which is not replaceable.
There are 2 possibilities for installation:
-
Luminaire with electromagnetic ballast (see fig1.a )
a. Switch off mains voltage.
b. Take out fluorescent tube.
c . Replace the original starter with supplied LED starter.
d. Place LED tube.
e. Switch the power on. -
Luminaire with HF electronic ballast (see fig1.b)
c . Switch off mains voltage.
d. Take out fluorescent tube.
e. Remove or cut off the electronic ballast a from AC side.
f .Connect the AC wiring according [fig 1.b) below.
g. Place LED tube
h. Switch the power on.
Warning:
When the Original Transformer is removed and/ or the internal wiring is
modified to operate the luminaire with a LED lamp, the original label has to
be removed and the supplied sticker should be attached. Because the Luminaire
can no longer be operated with a regular fluorescent tube now. Attach the
sticker on the side of the mains voltage side!“
file neme:80072x-LAP-ML-2015090401-XXXLE0-Lumineire remark.indd – Print file
created on: 20150904 08:57
**** AC InPUT on THIS SIDE! This luminaire is le suitable for IL tubes!
Notes on Disposal
The product is designated for separate colledion at an appropriate collection
point. Do not dispose of the product with household waste. For more
information, contact the retailer or the local authority responsible for waste
management.
Care
Before cleaning the unit, disconnect it, if necessary forrn other components;
do not use aggressive cleaning agents.
Warranty
The unit has been carefully checked for defects. If nevertheless you do have
cause for complaint, please go back to the retailer where you have bought the
product together with your proof of purchase.
Safety
General advices
- Read the manual care fully before use. Keep this manual for future reference.
- Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- Do not use this product if any part Is damaged or defective. If the product is damaged ordefec- tive, replace the productimmediately,
This product Must not be used in the immediate viciity of children without the supervision of anadult . Children must not be allowed to play with the device.
– Donot modify the product in any way.
– Do not expose the product to water or molsture . {IP 20)
-Do not immerge the product Into water. {IP 44—IP 66) - Keep the product away from heat sources.
- Do not block the ventilation openings.
- Donotlook dhectly into the light source of the LED lamp,
- Keepa minimum distance of >2 meter between the lamp and the surface being illuminated.
Electrical safety
- To reduce risk of electric shock, this product should only be opened by an authorized techni-cian when service is required.
- Do not use the product if the cable or plug is damaged or defective. When damaged or defec-tive, it must be replaced by the manufacturer or an authorised repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
- Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Caution, risk of electric shock.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.
Disclaimer
We reserve the right to make technical modifications. without notice. All
logos, brands and product names are trademarks or registered trademarks or
their respective holders and are hereby recognized as such. We are not liable
for damage arising from incorrect handling, improper use or wear or tear.
Please visit us online For more information about our company and our
products,
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union.
The product complies with all applicable specifications and regulations in the
country of sales. Formal documentation is available upon request. The formal
documentation includes, but is not limited to the Declaration of Conformity,
the Material Safety Data Sheet and the product test report.
CE declaration
This product complies with the following directives:
LVD: 2014/35/EU EMC: 2014/30/EU RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) can be found here:
Molenmakershoek 28
NL-7328 JK APELDOORN
Wwww.shada.nl
WEEE NL: 3505
WEEE DE: 37281017
WEEE AT: 40133
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>