bushops IguanoBot Bionic Robot Instructions
- July 9, 2024
- bushops
Table of Contents
bushops IguanoBot Bionic Robot
The IguanoBot belongs to the “bionic robot” category. A “bionic robot” refers to a robot that mimics biology and engages with biological (i.e. living world) features. Like a robot, the IguanoBot uses a mechanical structure to imitate the crawling action of iguanas (biological characteristic). Leave us a starred review with a photo of you and your creation. And benefit from 20% on your next order
Discover our other robots
Precautions
- This product requires two AA batteries, not included.
- When you fit the boards together, pay attention to their orientation (look carefully at the pictures) and nest them gently.
- When you connect the wires to the motor, make sure to put them in the correct position: the red wire to the right of the motor and the black wire to the left of the motor.
Installation Instructions
-
To begin, install the motor on plate 2.
Then plate 3 goes on the back of the motor and plate 1 goes on the motor. Glue the battery box to the back of plate 1 using double-sided tape.
-
Connect the wires from the battery box to the engine. The red wire goes through the right notch on the motor and the black wire goes through the left notch on the motor. Then twist the wires on themselves. Fit plates 4 and 5 on the sides to form the body of your IguanoBot.
-
Snap the head onto the front of the IguanoBot. Then insert plates 6 and 7 into the hole at the back, as shown in the picture. These two plates must fit into each other.
-
Insert plates 8 at the ends of plates 6 and 7. Add the black belt to the white pulleys to form the wheels. Then install them on the plates 9 using a screw in the center of the pulley. Fit the plates 10 onto the motor rods on each side. (The rod must not protrude beyond plate 10). Then screw plates 11 and 9 onto plate 10. Be careful, plates 9 must be installed in the opposite direction from each other.
Discover the principle of the IguanoBot:
The magic of electrical to mechanical transformation
How can a small battery turn a motor with pulleys? It’s a secret of science called “electrical to mechanical transformation”.
What is electrical to mechanical transformation?
It’s actually quite simple. Electricity is a form of energy. And when this
electrical energy is transformed into movement or action, we call it an
“electrical to mechanical transformation.” This is exactly what happens in the
IguanoBot.
How does the IguanoBot work?
- The battery : The battery contains chemical energy which is transformed into electricity when we insert it into the IguanoBot. This is called “chemical to electrical transformation”.
- The motor : The IguanoBot has a small motor inside. When the battery sends electricity to this motor, this electricity is transformed into movement. This is where the “electrical to mechanical transformation” occurs.
- Movement : The motor is connected to the wheels. So when the engine turns, it turns the wheels, and the IguanoBot starts moving.
And there you have it, it’s that simple! The energy from the battery is transformed into electricity, then this electricity is transformed into movement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>