BRAUN BC17 Classic Large Analogue Wall Clock User Manual
- June 13, 2024
- Braun
Table of Contents
BRAUN BC17 Classic Large Analogue Wall Clock
Product Information
| Model | BC17 |
|---|---|
| Language | English |
| Manufacturer | Braun |
| Hotline Contact | +44 808 175 3235 (calls free within the UK) or +44 208 208 |
1833
Website| www.braun-clocks.com
or www.braun-watches.com
WEEE Directive| This product is covered by the Waste Electrical and Electronic
Equipment (WEEE) directive. It should not be discarded with normal
household waste but taken to your local collection centre for
recycling.
EMC Requirements| This product conforms to the EMC requirements as per council
directive 2014/30/EU.
Trademarks| Certain trademarks used under license from The Procter &
Gamble Company or its affiliates.
Product Usage Instructions
To use the BC17 product, please follow these instructions:
- Set up the product by connecting it to a power source.
- Refer to the user manual in your preferred language for detailed instructions on how to operate the product.
- If you encounter any issues with the product, contact the Braun hotline at +44 808 175 3235 (for UK customers) or +44 208 208 1833.
- For further assistance, visit the Braun website at www.braun-clocks.com or www.braun-watches.com.
Important: Please ensure that you dispose of the product properly by taking it to a local collection centre for recycling, in accordance with the Waste Electrical and Electronic Equipment (WEEE) directive.
BC17
Wall clock
User instructions Guarantee
Battery precautions
- Do not use rechargeable batteries.
- Use only alkaline AA batteries of the same or equivalent type.
- Insert batteries with the correct polarity.
- Keep batteries away from children.
- Dispose of exhausted batteries according to local legal requirements. Do not dispose them by throwing away with normal household rubbish.
- Avoid short circuiting the contacts in the battery compartment and battery terminals.
- Remove batteries from the unit if it will be not used for long period of time.
- Exhausted batteries should be removed from the battery compartment to prevent over-discharge, which can cause leakage and may cause damage to the clock.
Battery installation
Install 1 X AA (1.5V), observing the correct polarity, into the battery
compartment located on the back of the clock, as shown in the diagram.
Open the back plate (Image 1)
Rotate the back plate clockwise to open, as shown in the diagram.
Time setting (Image 2)
Turn the TIME SET knob on the back of the clock in the direction of the arrow
until correct time is shown.
Guarantee
2 year guarantee against material and workmanship defects (except battery).
The guarantee is valid in those countries where the alarm clock is officially
being sold.
Broken or cracked lens screens are not covered under the guarantee.
Braun helpline
Should you have a problem with your product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 808 175 3235 (calls free within the UK)
or +44 208 208 1833.
WARNING! This product is covered by the Waste Electrical and Electronic
Equipment (WEEE) directive. It should not be discarded with normal household
waste but taken to your local collection centre for recycling.
This product conforms to the EMC requirements as per council directive
2014/30/EU.
Certain trademarks used under license from The Procter & Gamble Company or its
affiliates.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>