MATCO TOOLS MTCLTBEANGRN Beanie Worklight User Manual
- July 9, 2024
- MATCO TOOLS
Table of Contents
MATCO TOOLS MTCLTBEANGRN Beanie Worklight
OPERATION – ON/OFF
Press the ‘ON/OFF’ switch on the Work Light to turn on and change between (3) light intensity levels. The first press of the switch selects full power (120lm). The second press, 75% (90lm). The third press, 50% power (60lm). To switch off, press for the fourth time.
REMOVING THE WORK LIGHT
To remove the work light, pull the beanie rim open and push the light out from the hat inward. Once this is removed, you can charge your light and your beanie can now be washed.
CHARGING THE LIGHT
First remove the protective cover to reveal the USB connector. Plug the light USB connector into a USB wall socket (not supplied) or 12V USB car charger socket (not supplied), computer, or power bank for a minimum of 4 hours.
Specifications
- 3 LED Light Intensity Levels
- Rechargeable Li-polymer Battery
- Made in China to Matco specifications
FAQ
Q: How do I change the light intensity levels?
A: Press the ‘ON/OFF’ switch on the Work Light to cycle through the three
intensity levels.
Q: Can I wash the beanie with the work light attached?
A: No, you need to remove the work light before washing the beanie.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>