XYSMAG XYS-MAG15WHT Magnetic 15W Wireless Charger User Manual
- July 9, 2024
- XYSMAG
Table of Contents
XYSMAG XYS-MAG15WHT Magnetic 15W Wireless Charger
Product Information
Specifications
- Product Name: Magnetic 15W Wireless Charger
- Compatibility: Apple 12 series or above mobile phones, other mobile phones complying with Qi standards
- Charging Power: 15W
Product Usage Instructions
Precautions
- Do Not Disassemble: Do not attempt to disassemble the product.
- Avoid Extreme Conditions: Keep away from hot, humid environments, fire, and water.
- Metal Substances: Ensure the phone’s charging contact surface is free of metal substances.
- Handle with Care: Avoid strong impacts or hits.
Compatibility
This charger is designed for use with Apple 12 series or above mobile phones. For other phones complying with Qi standards, you may need to attach a receiving film or a compatible protective case.
FAQ
Q: Can I use this charger with non-Apple devices?
A: This charger is primarily designed for Apple 12 series or above mobile phones. For other devices complying with Qi standards, you may need additional accessories for compatibility.
Q: What should I do if the charger is not working?
A: Ensure that the charging contact surface on the back of your phone is clean and free of metal substances. Also, check if the charger is connected to a power source properly.
Product Parameters
-
Model Number: XYS-MAG15WHT
-
Input: 5V2A, 9V2A
-
Output: 5W/7.5W/10W/15W
Product size: 58×58×6mm -
Material: ABS + TPE + Stainless steel
-
Weight: 34g
-
Built-in Type C cable: 3ft
Precautions
- Please follow these precautions to ensure safe and effective use of the Magnetic Wireless Charger
- Do Not Disassemble: Do not attempt to disassemble this product yourself, as it may result in damage or malfunction.
- Avoid Extreme Conditions : Avoid using this product in hot or humid environments. Keep it away from sources of fire and water.
- Metal Substances: Ensure that the charging contact surface on the back of the phone does not contain metal substances, as they may interfere with charging.
- Handle with Care: Do not backlog or subject the charger to strong impacts or hits, as this may damage the product.
- Operating Temperature: Maintain an ambient temperature between 0-45°C (32-113°F) while using the charger.
- Compatibility: This product is designed for use with Apple 12 series or above mobile phones.
- For other mobile phones complying with Qi standards, it may be necessary to attach a receiving film or a mobile phone protective case with a receiving film for compatibility.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>