hugsun X99 Android Media Player Instructions
- July 8, 2024
- hugsun
Table of Contents
hugsun X99 Android Media Player
PRODUCT OVERVIEW
- DC input: Please use a 5V 4A adapter
- type-C: indicates the device that can connect to type-C
- HDMI OUT: HDMI output supports up to 4K 60fps
- LAN interface: Supports 1000M wired network
- Switch: Click to restart the machine
- TF card: Supports MicroSD card
- USB2.0: indicates the device that supports USB2.0
- USB3.0: Devices that support the USB3.0 protocol
Use
- First fix the device in the specified place (for fixed devices, refer to the installation instructions)
- Plug the HDMI cable into the display device
- Connect the type-c cable to the control device
- Connect the network cable to the router or switch (if you do not connect the network cable, you need to connect the system to WIFI)
- Plug the adapter into the socket
- At this time, there should be display images on the display device, and the machine can be operated after the digital tube has time to display.
FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
following the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>