pTron B0CTX363NH 10 W Musicbot Groove Bluetooth Speaker User Guide

July 7, 2024
pTron

B0CTX363NH 10 W Musicbot Groove Bluetooth Speaker

Specifications

  • Product Name: Musicbot Groove Bluetooth Speaker
  • Default Volume: 60%
  • Power Source: Rechargeable battery
  • Connectivity: Bluetooth, TF card, USB drive, FM radio
  • Accessories: 1 USB Type-C charging cable, 1 Aux cable

Product Usage Instructions

Power On & Pairing

  1. Power On: Slide the power button towards the
    right. The LED light will indicate power status.

  2. Charging: The charging LED light will glow
    during charging and turn off when fully charged.

Playback Controls

  • Minus Button: Press once for previous song,
    long press to decrease volume.

  • Play/Pause Button: Press once to play or pause
    music.

  • Mode Button: Switch between playback sources
    (Bluetooth, TF card/USB drive, FM mode).

  • FM Mode: Use Mode button to switch to FM mode.
    Search for channels by holding Play/Pause button.

  • Plus Button: Press once for next song, long
    press to increase volume.

Troubleshooting

Scenario 1 – Connectivity Issue:

  1. Turn OFF the speaker and charge to 100%.
  2. Unpair with connected Bluetooth device.
  3. Restart Bluetooth device.
  4. Switch ON speaker and pair again.

Scenario 2 – Sound Quality Issues:

  1. Check equalizer settings on connected device.

  2. Ensure proximity and remove obstacles for better sound
    quality.

  3. Test sound on different devices and media players.

  4. Avoid water exposure and dry any droplets with a blow
    dryer.

Safety Precautions

  • Avoid extreme heat, humidity, or corrosive environments.
  • Vary playtime based on personal habits.
  • Use compatible USB cables and chargers to prevent damage and
    warranty void.

Packing Box Content

  • 1 Sound Bar Speaker
  • 1 USB Type-C charging cable
  • 1 Aux cable
  • 1 User Manual/Warranty QR Card

FAQ

What is covered in the warranty?

The warranty covers manufacturing defects in materials and
workmanship under normal usage conditions. It does not cover
accessories like charging cables or Aux cables. Product
registration is mandatory for warranty claims.

How can I avail the warranty?

To avail the warranty, you must register the product at the
provided link. Please read the complete warranty details on the
official website.

Musicbot Groove Bluetooth Speaker – User Guide
Important: The pTron “Musicbot Groove” Bluetooth speaker is set at 60% default volume. You can increase the volume through the control panel on the speaker.
POWER ON & PAIRING: i. POWER ON: Power on the speaker by sliding the power button towards the right, Speaker led light will be turn
on and also speaker will respond with a voice prompt. ii. Open the Bluetooth function on your device and search for the available Bluetooth. iii. Click on “pTron BT speaker’ to connect . iv. POWER OFF: Power off the speaker by sliding the power button towards the Left. LED LIGHT ON:- Turn the LED light on or off by sliding the Light ON/OFF button to the left or right. Bluetooth Mode: Bluetooth Version: Bluetooth 5.3 Bluetooth pairing name: “pTron BT speaker” Just Turn on the Speaker. It will Automatically Connect to the Last Connected Device. Note: The last connected device must be within 10 meters of the speaker and the Bluetooth function must be turned on. AUX Mode i. Connect the device with the 3.5mm aux cable and the speaker will enter into the AUX mode with voice prompts. TF/USB Mode i. Use TF Card: Insert a TF card into the TF slot to activate the TF card mode ii. Use a USB drive: Insert a USB stick or pen drive into the slot to activate the USB drive mode. Note: This speaker can support TF/USB up to 32GB. TO CHARGE THE SPEAKER: i. Connect the USB type-C cable to the speaker charging port and the other end of the cable to a USB 5V/1A
power source. ii. The charging led light will continuously glow during the charging. The charging LED light will turn off when the
speaker is fully charged.

1.Minus Button: 1. One time press the button for previous song 2. Long press to decrease the volume
2.Play/Pause Button: 1. Press one time to play or pause music
3.Mode Button: 1. If a TF card/USB drive is already plugged into the speaker but you want to play a song via Bluetooth then just
press the Mode button to enable playback thru Bluetooth connected device. To switch back to playback from TF card/USB drive, just press the Mode button again.
FM mode: Press one time mode button “M” to change the Bluetooth mode to FM mode. FM search: In FM mode, press & hold down Play/Pause button for 2s to automatically search for channels Next Station: One time press the” +” button. Previous Station: One time press the”-” button.
Note: This speaker has an antenna; it is mandatory to extend the FM antenna in FM mode.
4. Plus Button: 1. One time press the plus button for next song 2. Long press to increase the volume.
Troubleshooting Scenario 1: Connectivity Issue 1. Turn OFF the Speaker and charge 100%. 2. UN-pair with the connected Bluetooth device. 3. Restart the Bluetooth device. 4. After 100% charging switch ON the speaker and pair it with the Bluetooth device again.
Troubleshooting Scenario 2: Sound is distorted/low volume/low bass/low quality? 1. Check if the connected device does not have any equalizer settings applied. 2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed. 3. Check if the distortion or quality lowers at all volumes or only at high volumes. 4. Check the sound on different media players and different devices and if the distortion happens on all devices or
only on specific ones. 5. Check if the problem occurs at all levels of charging or only at low charging levels. 6. Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water
from a distance.

Safety Precautions Keep the device out of extreme heat and humidity or corrosive environment. Play time may vary depending on personal habits. Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty.
We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package. Please don’t over-charge the product as it will decrease the service life of battery. Read all warnings on the product and in the operating instructions. Don’t jam the ports such as charger port, LED port, etc. It is recommended to utilize the product below the maximum volume in order to protect your hearing. Please don’t open/temper the product or product’s battery. Please keep the product out of children’s reach. Dispose the product responsibly and adhere to your local authority guidelines.
Packing Box Content 1 Sound Bar Speaker, 1 USB Type-C charging cable, 1 Aux cable, 1 User Manual/Warranty QR Card
What is Covered in Warranty? Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the
product is used under normal conditions and the purpose for which the product was designed. No warranty on product accessories such as charging USB cables, Aux cable. To avail warranty, Product Registration is Mandatory at https://ptron.in/apps/product-registration Please read through the complete warranty details at https://ptron.in/pages/repair-service-warranty
Customer Care Details: Mail: support@ptron.in Tel: 040 – 67138888 Service Centers List: https://ptron.in/pages/ptron-service-centers
Disclaimer: The color and specifications shown in or mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals