sPOD 300-ARB ARB Adapter Harness Installation Guide
- July 7, 2024
- sPOD
Table of Contents
ARB ADAPTER HARNESS INSTALLATION INSTRUCTIONS
Revision 2.0 // PART NUMBER 300-ARB
TOOLS REQUIRED
- Phillips head screwdriver
- Three 5AMP fuses will be required for the 3 positions
INSTALLATION PROCEDURE
1. Familiarize yourself with the sPOD ARB Adapter Harness wire colors:
1. RED: Isolating switch/compressor positive lead
2. BLACK: Ground
3. YELLOW: Front locker
4. GREEN: Rear locker
- SWITCH 1
- SWITCH 2
- SWITCH 3
2. Attach the sPOD ARB Adapter Harness to the ARB Harness as shown:
- sPOD ARB Adapter Harness
- ARB Harness
3. The sPOD ARB Adapter Harness replaces this section of the ARB Harness
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>