DUNDEE DECO Self Adhesive Wall Panels Installation Guide
- July 7, 2024
- DUNDEE DECO
Table of Contents
Self Adhesive Wall Panels
Self-adhesive Wall Panels
Installation Guide
Prepare the Wall and Panels
Clean and Measure: Ensure the wall surface is clean, dry, and free of any
debris. Measure the wall area to determine how many 23.6 in X 11.8 in Wall
Panels are needed and mark the placement of each panel.
Cut Panels (if necessary): To fit wall dimensions, the end panels might
need to be cut. Use sharp scissors to cut the panels to size. It is
recommended that cut panels are placed near the top of the ceiling.
Peel off the Backing and Stick
Peel Off the Backing: Starting at one corner of each panel, peel off the
protective backing to expose the adhesive.
Position and Stick the Panel: Carefully position the panel on the wall,
aligning it with position marks. Press ?rmly from the center outward to
ensure the adhesive bonds well to the wall surface and to remove any air
bubbles.
Repeat for all Panels and Finish
Press Firmly: After placing each panel, press firmly along all edges and
across the surface to ensure a strong bond.
Repeat and Finish: Continue the process with the remaining panels,
ensuring each one aligns properly with the previous panels. Once all panels
are installed, inspect for any areas that may need additional pressing to
secure the adhesive.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>