Bluedio T-Elf 2 Mini Wireless Earbuds With Built-in Microphone User Manual
- June 8, 2024
- Bluedio
Table of Contents
Bluedio T-Elf 2 Mini Wireless Earbuds With Built-in Microphone
SPECIFICATION
- Brand Bluedio
- Color Black
- Form Factor In-Ear
- Connectivity Technology Wireless
- Wireless Communication Technology Bluetooth
- Model Number T-Elf 2
- Frequency range 4 GHz-2.48 GHz
- Support protocols A2DP, AVRCP, HSP, HFP
- Frequency response range 20Hz-20KHz
- Standby time is about 1000 Hours
- Music/Call Time About 5-6 Hours
- Charging time About 1 hour for earphones and 2 hours for charging the case
- Input voltage/current 5V/>100mA
- Output power 7mW + 7mW
- Line Length None
- With Microphone Yes
- Resistance 32Ω
- Function For Mobile Phones, HiFi Headphone, For iPods, Sport
- Support Apt-x No
- Style In-Ear
What’s In the Box
- Bluedio T Elf 2
- Charging Case
- Charger Cable
- User Manual
- 3 Pairs of ear tips with 3 different sizes(S, M, L)
HI-FI STEREO SOUND
Deep bass with crystal clarity and greater dynamic range
Bluetooth Pairing
-
Open the charging case, you will see the LED light on two earbuds flashing.
-
Turn on your cell phone Bluetooth and search “T Elf 2” and click it to connect. You will hear “Pairing successful” from both sides.
-
Left and right earbuds paired successfully: The white LED was off
Please reset your earbuds if you hear sound from one side only or if you cannot synchronize the earbuds.
Please remove all pairing records on your devices first, then please do the following steps:
-
Long touch the touch button on earbuds until hearing power off” to shut down the earbuds.
-
Long touch the touch button on one earbud until hearing “Power on to turn on the earbud. Continuously tap its touch button three times to shut down and remove Bluetooth connecting records automatically.
-
Repeat step 2 on the other earbud.
-
Put the earbuds back in the charging case for about 10 seconds, and make sure that the earbuds have power.
-
Open the charging case, to pair earbuds and connect with a cellphone just like the first time you did.
Tips before using
- Remove the earphone charging insulation sheet from the charging box
- and then put the earphones back into the charging box
- and close it for charging.
Usage
easy control by touching
Features
-
New touch control on the Bluedio T Elf II
The connection and functionality of the Bluedio wireless earbuds 5.0 T-Elf 2 have been improved, and touch control has been added. By doing this, you may quickly do a variety of functions with only a touch of your finger: changing songs, adjusting the level, pausing and playing, answering or hanging up the phone. -
MUCH BETTER 6MM DRIVERS
The T-Elf 2 Wireless Earbuds have 6mm speakers rather than the previous generation’s 5mm drivers, giving you a better, more crystal-clear sound. -
QUICK & EASY PAIRING
Bluetooth earbuds include one-step pairing capabilities. When you remove the Left and Right earbuds from the charging case, the headphones will automatically pair. The charging box’s battery level and the status of the headphone pairing may both be monitored at any time thanks to an LED indicator. -
A 35-HOUR WORKWEEK
Each charge lasts approximately 5 to 6 hours and there are approximately 5 full charges in the charging case (The play time is twice that of similar earbuds in the market). The battery in the earbuds can be recharged from the dead to full in around an hour of charging, whereas the charging case takes only two hours.
FAQs
How to reset earbuds?
Please press the power button for 5 seconds.
How to turn on/off earbuds?
Please press the power button for 3 seconds.
How to change tracks?
Please press the volume up/down button for 3 seconds.
Why can’t I connect my earbuds with my phone?
Please make sure your phone’s Bluetooth is turned on, and search “T Elf 2” and click it to connect. You will hear “Pairing successful” from both sides. If you still can’t connect, please try to reset your earbuds. If it still doesn’t work, please contact us via the Amazon message center or email us at [email protected] We will try our best to help you solve the problem.
How do you charge mini wireless earbuds?
Close the charging case’s cover after putting the earbuds inside. The battery LED within the charging case is red, yellow, or green when the lid is open to show the earbuds’ current battery state. The earphones need about two hours to fully recharge.
How do wireless earbuds not fall out?
Your ears are held in place by ear hooks or over-the-ear/around-the-ear designs that clasp around them. As they provide a better and more stable hold than other types of earbuds, these are the best if you intend to wear the headphones while engaging in activities that demand a lot of movement.
Do wireless earbuds stay in while running?
If you wear a pair of shoes that aren’t sweat-proof during a run or workout, there’s a strong possibility they’ll give out on you. Additionally, they probably won’t stay in if they don’t suit your ears.
How do you change the sound on mini earbuds?
By tapping the earbuds, you can switch between tunes. To go back a track, triple-tap the left earbud twice. To move to the next song, triple-tap the right earbud
How do you check the battery on mini earbuds?
On your smartphone, you can view the Air Buds+’s battery level. Look at the Bluetooth symbol in the notification bar. It is followed by a mention of the battery level. The charging case’s battery level can also be seen on the case.
How long do mini earbuds take to charge?
Up to 30 minutes are needed to completely charge an Air Bud+.
How do I stop losing my earbuds?
Put the charging case where it belongs. When not in use, you should always store your wireless earbuds in their case. Not only is it secure against loss, but it also provides a secure method of storing your earbuds without endangering them. You could also spend money on stylish case skins or covers.
Do earbuds work without wifi?
Yes. Without Wi-Fi, Bluetooth can be used. In actuality, Bluetooth can be set up and utilized without any kind of internet connection. The majority of Bluetooth gadgets can, however, also connect to the internet.
Can sweat damage wireless earbuds?
If you sweat more heavily, you might need to choose sweatproof earbuds since sweat influences the diaphragm’s vibration, which directly destroys your earphones. Prolonged sweat will also corrode the internal components.
Should you sleep with wireless earbuds?
Sleeping with earbuds in the ear canal can aggravate the condition and, in severe circumstances, result in hearing loss.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>