Xinborry E8 TWS Wireless Earbuds User Guide

Xinborry E8 TWS Wireless Earbuds User Guide

PRECAUTIONS

1. Read the User Guide carefully and completely before using the product.
2. When using earbuds, please adjust the volume appropriately. Prolonged use at high volume may impair hearing.
3. When wearing this product, the external sound may be reduced, please use this product in a safe environment.
4. Do not use the product if it is obviously defective or makes loud, unusual (whist lingo beeping) noise, and contact the after-sales service.
5. Please clean the earbuds regularly to ensure that the charging contacts are in good contact with the charging case.
6. Please tear off the protective film before use.
   

Packing List:

1. E8 wireless earbuds x1

2. Type C charging cable x1

3. Eartips(Size S/M/L) x3

4. Use manual x1

WEARING

Wearing: Default size is M. Choose the silicone eartips that are the most suitable for your ears.

KEY PRESS

CONTROL

Previous song: Press and hold“ ”on L for 2S.
Next song: Press and hold“ ”on R for 2S.
Note: When using a single earbud, only previous song or only next song.
Play/Pause, Answer/Hang up a call: Double-touch“ ” on L/R.
Activate voice assistant: Touch three times“ ” on L/R.
Turn on/off the game low-latency mode: Touch four times“ ”on L/R.
Note: There is no volume adjustment function on the earbuds, please use your mobile phone to adjust the volume.

FUNCTION DECLARATION

￭ On/Off: 1.The earbuds are in the charging case, the cover is opened, earbuds automatically power on, the cover is closed, and earbuds automatically turn off.
2.When the earbuds outside the charging case, press and hold “ ” for 2S to turn on, with a prompt sound. Press and hold “ ”again for 4S to turn off, with a prompt sound.

• Pairing/Connection: After the first power-on, then enters the Bluetooth pairing mode, the blue LED light of the main earbuds flashes quickly. Then please turn on the Bluetooth function on your phone, search “E8” and click to connect. There will be a sound when the connection is successful, and the blue LED light will flash

Play/Pause: When playing music, double-touch “ ”on L/R to switch play/pause mode.

• Hands-free answer a call/Hang up: When there is an incoming call, double-touch “ ”on L/R to answer the call, Double-touch “ ” again to hang up.
• Rejecting a call: When there is an incoming call, press and hold “ ”on L/R for 2S to reject.
• Previous/Next song control : Previous/Next song control: When playing music, press and hold “ ”on L for 2S to switch to the previous song, press and hold “ ”on R for 2S to switch to the next song.
• TWS re-pairing function: The earbuds have been paired with TWS. If the TWS pairing of L/R earbuds is lost due to misoperation during use, please follow the method below to re-pairing.Turn on the earbuds, and when the earbuds are not connected to Bluetooth, double-touch” ”on L and R at the same time to re-pair. After completing the TWS re-pairing , only the blue LED light of the main earbuds will flash quickly. In waiting to pair state, the blue LED light of the subsidiary earbud will flash.
• Low-latency mode: Touch four times“ ”to switch the function of low-latency mode.
• Charging:

1.  **Charing case:** Use the attached charging cable to connect the charging case to the recommended USB 5V adapter,when charging the charging case, the indicator light flashes. After fully charged, the white light will be on
2.  **Earbuds:** Put the earbuds into charging case, when put in correctly, the green light of the case will be on for 4S and then turn off. Close the cover and the earbuds will be charged in the case.
3.  **Automatic shutdown** : The earbuds will automatically shutdown in10 minutes when the power-on state without pairing connection.
4.  **Low power:** When the battery power of the earbuds is lower than 10%,the earbuds enter the low battery alarm state, and the red light flashes every 3S. Please put them back into the charging case to charge in time.

• Clear the pairing list: Press and hold “ ” for 8S in the off state to clear the list and enter into pairing state automatically

INDICATOR STATE DESCRIPTION

EXCEPTION HANDLING

a.Problem : Unable to connect the device automatically.

Reasons and treatment methods

1. The first use of the product needs to manually connect to Bluetooth, it automatically goes back to the last paired Bluetooth device when next time
2. Check whether the product is connected to other Bluetooth devices
3. Check whether the Bluetooth device is on and in a relatively closerange
4. Restart the machine once or reset the product.

b . Problem: Unable to find the product on Bluetooth search.

Reasons and treatment methods:

1. Check whether the product is connected to other Bluetooth devices.
2. Check whether the product is in the Bluetooth waiting connection state
3. When pairing, the pairing device is within a close range of the product.

c. Problem: Device will not turn on.

Reasons and treatment methods:

1. The battery power is too low and the product can not be started, charging the product.
2. Check whether the product charging is normal

d . Problem: The sound of the product is too low.

Reasons and treatment methods:

1. The product is not fully deployed or the horn sound area is blocked.
2. The product volume is not added to the maximum, manually increase the product volume(some Android devices have no volume synchronization when connected) exception handling.

e . Problem: Short Bluetooth transmission distance.

Reasons and treatment methods:

1. The product is placed in a place with complex interference signals (microwave oven, signal transmitting equipment, etc.), and the mobile product is far away from the interference source equipment
2. Place the product in a place with shielding or blocking signals (metal desktop or device), and move the product position

f . Problem: Unable to charge.

Reasons and treatment methods:

1. Check whether the charging cable is fully normally inserted into the charging port of the product.
2. The product charging voltage is 5V, it cannot use the charging function if the voltage is too high or too low , replace the charging adapter

SPECIFICATIONS

SAFETY NOTICE

Safe battery use:

1. Do not remove the product or replace the battery without permission to avoid the battery exposure to high temperature or fire.
2. Do not subject the product or battery to mechanical impact to avoid battery short circuit.
3. Do not charge the product unattended.

Product with magnetic and small objects: The product with small accessories, children should be used accompanied by parents, beware of the risk of accidental eating and suffocation. Product components contain magnets that may interfere with human implants such as pacemakers, and should be used away from people wearing pacemakers and other implants in case of accidents.

Safe use environment

1. This product is used away from high temperature and flame.
2. The product should be placed in a flat and stable plane in a normal temperature and humidity environment.
3. Do not use this product in an environment where attention is required (such as when walking on the road or driving).

Recycling note : After the product is scrapped, it will be delivered together with the rechargeable battery to the regular waste recycling center or the designated dealer for safe recycling.

Cleaning method emphasizes :Do not use corrosive cleaning agent. Do not directly dry with high temperature flame.

Emphasis on using accessories: Only use the accessoriesprovided or recommended by us (manufacturer).

Use specification and responsibilities: This product is used as a Bluetooth connection attachment device, specially designed for wireless audio communication, such as playing musicor calling via Bluetooth technology. Any operation that does not conform to the provisions of the attached products is a non-standard use. We shall not be liable for damage to USB equipment and non-standard use of products and additional accessories.

• Please give the damaged products including batteries to a regular recycling point or Dealers in the nearby area.
• Please charge only with the charging adapter recommended by Xinborry.
• Charge the product regularly even if it does not use it for a long time. (Approximately once every 3 months)
• Products can only be charged at ambient temperatures of 10℃ to 40℃
• Avoid heating the product over 60℃. Please avoid sunshine.Do not throw the product into the fire.

USE AND RESPONSIBILITY

Any use not specified in the product guide is considered anincorrect use of the product. Xinborry shall not be liable for damage caused by abuse or irregular use of products and accessories.

If substandard USB devices are used, Xinborry shall not be liable for possible damage.

Xinborry does not be responsible for communication interruption and loss caused by battery depletion, excessive aging or beyond Bluetooth connection.

When using the equipment, please comply with the laws and regulations of the country or region.

Certification Statement

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device might not cause harmful interference.
2. This device must accept any interference received,including interference that may cause undesired operation.

CONTACT US

Dear Value Customer:
Thank you for purchasing our Xinborry’s products. To  ensure you have a better experience for the product, please read this manual carefully before using it. If there is any quality issue of our product, please contact our service team support@xinborry.com We will provide you with the best and quickest support.

Sincerely
Xinborry

Product

Important Prompt
The product can be charged by 5V Chargers/USB ports only. Adapters over 5V such as quick chargers are not allowed, which may cause fire or explosion.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>