Kalia KF1548 Exki Single Lever Kitchen Faucet Instruction Manual

: June 8, 2024
: Kalia

Kalia KF1548 Exki Single Lever Kitchen Faucet Instruction Manual

Thank you for choosing Kalia!

Thank you for choosing a Kalia product and for placing your trust in our company.
Kalia has a business philosophy based on solid core values that are focused on providing innovation and excellence as well as a personalized service designed to meet the changing needs of today and tomorrow. We are convinced that you will be fully satisfied with your new Kalia product and that it will exceed your expectations in terms of reliability and durability. At Kalia, we put our expertise to work for you!
This guide contains all the information necessary for the installation and proper use of your Kalia product. To ensure the smooth installation and optimal use of your product, we recommend to take a few moments to study the information provided in this guide.
In the event that you should encounter a problem related to the installation or the performance of this product, please contact us at our toll-free line 1 877 GO KALIA (1-877-465-2542) or by email at: service@KaliaStyle.com.
Thank you once again for choosing Kalia

Important Information

IMPORTANT

Read this guide before proceeding with the
Make sure you have all the tools and materials needed for
Make sure all the parts shown in the Service Parts Diagram section are included and in good condition.
Respect all local plumbing and building codes
Do not store cleaning products in an enclosed space such as under a kitchen sink counter or the vanity of a bathroom Emanation from cleaning products can have devastating effects on plumbing fixtures and accessories such as flexible hoses. These products should be stored in a cool and ventilated space.

WARNING

When connecting the supply lines, make sure they are not bound or This may cause water restriction or damage.
In order to prevent water contamination, do not remove any components from this faucet. The faucet contains a backflow protection
Do not use plumber’s glue if the counter surface is made of Petroleum-based products such as plumber’s glue can stain marble.

COMMENT

The installation will require 3/8” (9.5 mm) male
Before taking the faucet out of the packaging, cover the drain of the sink so no parts are
Make sure all the parts are included and not damaged (see the service parts diagram). If there is a problem, report it immediately to the
Check to make sure the water supply and drainage lines are not Replace if necessary.
Make sure there is sufficient clearance to properly use the

handle of the faucet.

When replacing a faucet, turn off the After turning off the water, turn the faucet on to release the water pressure.
Do not use petroleum-based products with the exception of plumber’s

Kalia reserves the right to make any design changes without notice. Use the installation manual supplied with the product.
Kalia is not responsible for problems caused by an installation not executed in accordance with the directions given in this guide.

Service Parts Diagram

Service Parts List

Assemblage /

Assembly

| #| Numéro de pièce /

Part Number

| Description| Qté/ Qty
---|---|---|---|---
–| 1| 106169-XXX | Corps/ Body| 1
–| 2| 103633| Cartouche/ Cartridge| 1
–| 3| 106089-XXX | Anneau de finition de la manette/ Decorative handle ring| 1
–| 4| 104218-XXX | Poignée/ Handle| 1
–| 5| 106167| Vis d’ajustement M5 x 5/ Set screw M5 x 5| 2
–| 6| 104219-XXX | Bouchon en plastique/ Plastic screw cap| 1
Ensemble douchette/ Spray head assembly| 1
__

__

104220-XXX *

| 7| 104221| Aérateur/ Aerator| 1
8| 104222| Rondelle de Caoutchouc OD 15mm x 2mmx 2mm/ Rubber washer OD 15mm x 2mmx 2mm| 1
9| 104223-XXX *| Douchette/ Spray head| 1
10| 100498

ou/or 103201

| Valve anti-retour/ Check valve| 1
11| Valve anti-retour Calgreen/ Check valve Calgreen| 1
–| 12| 104224| Rondelle de Caoutchouc OD 18.5mm x 4mm x 2.5mm/ Rubber washer OD 18.5mm x 4mm x 2.5mm| 1
Ensemble bec flexible et bras (Ressors)/ Flexible spout and arm assembly (Spring)| 1
__

__

104228-XXX *

| 13| 104225| Vis pour plaque d’aimant/ Screw for magnet plate| 1
14| 104226-XXX | Plaque d’aimant/ Magnet plate| 1
15| 104227| Aimant/ Magnet| 2
16| 104229-XXX | Bec flexible (Ressors) et bras/ Flexible spout (Spring) and arm| 1
17| 106168| Bague d’usure/ Wearing ring| 2
18| 104231| Joint d’étanchéité OD19.5 mm x D2,5 mm/ O-ring OD19.5 mm x D2.5 mm| 2
Ensemble bec flexible et bras (Boyau)/ Flexible spout and arm assembly (Hose)| 1
__

__

104996-XXX *

| 13| 104225| Vis pour plaque d’aimant/ Screw for magnet plate| 1
14| 104226-XXX | Plaque d’aimant/ Magnet plate| 1
15| 104227| Aimant/ Magnet| 2
31| 105151-XXX | Bec flexible (Boyau) et bras/ Flexible spout (Hose) and arm| 1
17| 106168| Bague d’usure/ Wearing ring| 2
18| 104231| Joint d’étanchéité OD19.5 mm x D2,5 mm/ O-ring OD19.5 mm x D2.5 mm| 2
–| 19| 104232| Bague d’usure/ Wearing ring| 1
–| 20| 104233-XXX *| Anneau de finition/ Decorative ring| 1
–| 21| 104234| Support en caoutchouc du corps/ Rubber washer for body| 1
–| 22| 104235| Tube fileté M27 x 1,5 mm/ Mounting thread pipe M27 x 1.5 mm| 1
–| 23| 104236| Support en caoutchouc/ Rubber mounting washer| 1
–| 24| 104237| Rondelle de montage (S.S.)/ Mounting flat washer (S.S.)| 1
–| 25| 102930| Écrou de retenue/ Retainer nut| 1
–| 26| 102912| Vis de montage/ Mounting screw| 2
–| 27| 102969| Tuyau d’alimentation chaud/ Hot supply hose| 1
–| 28| 102970| Tuyau d’alimentation froid/ Cold supply hose| 1
–| 29| 104238| Clé d’aérateur/ Aerateur key| 1
–| 30| 101630| Clé hexagonale Hex 2.5/ Allen Key Hex 2.5| 1
–| 32| 106088| Écrou de fixation de cartouche/ Cartridge mounting nut| 1

Necessary Tools and Materials

Step 1

Unscrew and remove the mounting nut, the metal washer and the rubber washer (fig 1.1).
Insert the two hoses and the threaded tube in the hole (fig 1.2).

Step 2

Partially tighten the mounting screws on the mounting nut (fig. 2.2).
Slide the rubber washer and metal washer in the faucet threaded tube (fig. 2.1).
Tighten the mounting nut until you feel a slight pressure.
Then lightly unscrew the mounting nut so that the screws are to the front and back (fig. 2.3). Then tighten the mounting screws evenly

Step 3

Connect and firmly tighten the supply hoses of the faucet using an adjustable wrench. The blue supply hose must be connected to the cold male connection and the red one to the hot male connection (fig. 3). Comment: If the faucet installation requires that you coil the supply hoses, maintain a loop of 3” (76 mm) diameter.

Step 3

Connect and firmly tighten the supply hoses of the faucet using an adjustable wrench. The blue supply hose must be connected to the cold male connection and the red one to the hot male connection (fig. 3). Comment: If the faucet installation requires that you coil the supply hoses, maintain a loop of 3” (76 mm) diameter

Maintenance and Cleaning

To avoid damage and optimize your product, you must follow the below recommendations when maintaining your Kalia product. Damages resulting from inappropriate handling are not covered by the Kalia warranty.

Rinse with clean water and dry with a soft cotton cloth or sponge. Do not use anything abrasive such as a scouring brush or sponge to clean the surfaces.
For tough stains, use a gentle liquid detergent such as dish soap and hot water. Do not use an abrasive and acidic cleaner.
Carefully read the label on the cleaning product to make sure it is safe and appropriate. Always try the cleaning solution on a less visible surface before applying it to the rest.
Completely rinse with water immediately after applying the cleaner.
Regular cleaning prevents the accumulation of dirt and tough stains.

Troubleshooting Guide

Before any operation, turn off the water and turn the faucet on to release the pressure if required.
Water flow is low or non-existent? Aerator leaks or the jet coming from it are not uniform?