LG EVW011SK Series Electric Vehicle Charger User Guide

LG EVW011SK Series Electric Vehicle Charger

Specifications:

• Model Numbers: EVW011SK-SN, EVW011SK-SR, EVW011SK-SH, EVW011SK-SD, EVW011SK-SO, EVW011SK-SL, EVW011SK-SA, EVW011SK-SX
• Compatible Versions: iOS 15 or above, Android 10 or above
• Initial Password: 000000

Product Usage Instructions

System Setting Screen :

1. Launch the Charger Settings app.
2. Enter the set password when prompted.
3. Go to the charger settings system screen.

Charger Connection and Disconnection :

iOS :

1. Turn on Bluetooth on your phone and click Find Charger.
2. Press Bluetooth Pairing button on the charger.
3. Connect to the charger with matching model name and serial number.
4. Enter password in charger password input window.
5. Check information of connected charger.
6. Press Disconnect Charger when settings are complete.

Android :

1. Follow similar steps as iOS for connection and disconnection.

Network:

• iOS/Android:
  Enter the password of the AP router that the smartphone with the Charger Settings app is connected to.

Basic Settings :

• iOS/Android:
• Set the URL of the charging control server and charger ID. Press [Continue] after entering the information.

Voice:

• iOS/Android:
  Settings related to voice features can be adjusted here.

• Master Charger and Charging Capacity Settings:
  Set whether a charger is a master charger, its maximum charging capacity, grouping options, and group ID (1-16).

FAQ :

• Q: What is the initial password for connecting to the charger?
  A: The initial password is 000000. You can change it through password change settings.

User Guide
Electric Vehicle Charger
(Settings Guide)
After reading the user manual, store it in an accessible place for easy reference.

• EVW011SK-SN
• EVW011SK-SR
• EVW011SK-SH
• EVW011SK-SD
• EVW011SK-SO
• EVW011SK-SL
• EVW011SK-SA
• EVW011SK-SX

SYSTEM SETTING SCREEN

1. Launch the Charger Settings app. (Compatible version: iOS 15 or above, Android 10 or above)
2. When the password input window appears on the Charger Settings app, enter the set password. (The initial password is 000000, and you can change it through password change.)
3. Go to the charger settings system screen.
   iOS

Android

No.| Category| Descriptions|

ENGLISH

---|---|---|---
1| [Charger Connection and Disconnection]|

1. This is the section for the Charger Settings app to connect to the charger.
2. Turn on the Bluetooth feature on your mobile phone, and click Find Charger.
3. Press the Bluetooth Pairing button on the charger.
4. Connect to a charger that matches the model name and serial number among the available chargers.
5.  Connection successful pop-up will appear. Enter the password in the charger password input window that is displayed when you close the pop-up. (The initial password is 000000, and you can change it through password change.)
6.    You can check the information of the connected charger.
   • [Model name]: Displays the model name of the charger.
   • [Serial number]: Displays the unique number of the charger.
   • [HMI Version]: Displays the version information of the charging application.
   • [Control Board Version]: Displays the firmware version information of the control board.
   • [OCPP Software Version]: Displays the OCPP certification version information.
7. Once the charger settings are complete, press Disconnect Charger to end the connection with the charger.

NOTE
The software version may change depending on the product’s performance enhancement or function improvement in the future.

NOTE
The software version may change depending on the product’s performance enhancement or function improvement in the future.

location

charger via Bluetooth, it enters the settings screen.

• [Network]: Display the IP address information of the charger and set the wireless network.
• [Basic Settings]: Set the URL of the charging control server (operation server) and the ID of the charger.
• [Voice]: Set the volume and language for the charger.
• [Master Charger and Charging Capacity Settings]: Set up master charger settings and the maximum charging capacity.
• [Change Charger Password]: Change the password set on the charger.
• [Reset Charger Data]: Reset the data stored on the charger.

• Display the currently assigned IP address of the charger and set the wireless network.
• [Wi-Fi]: This is where you set the charger to use a wireless network. To set the charger’s wireless network, enter the password of the AP router that the smartphone with the Charger Settings app installed is connected to.

NOTE

• The charger and the wireless Wi-Fi router should be located within 40 m (131.2 feets). Since the installation environment significantly affects wireless Wi-Fi communication, this distance may be reduced.
• The number of chargers that can be connected to a Wi-Fi router can vary depending on the performance of the Wi-Fi router.

control server (operation server address) that the charger needs to connect to and the ID of the charger. Enter the operating server address and charger ID, then press the [Continue] button

• Set whether a charger is a master charger and its maximum charging capacity. Optionally, you can set whether to use multiple grouping and select a group ID (from 1 to 16). Ensure only one charger is set as the master charger among those connected to the same local network with the same group ID. When multiple grouping is not in use, it is considered that only one group exists within the local network.
• You can select maximum charging capacity from 16 A / 24 A / 32 A / 40 A / 48 A.

NOTE
 This setting may not be displayed for certain models that do not support multiple grouping.

network settings information, charging control server (operating server) address and charger ID, voice settings information, and charger password.

load management menu.

• [Activate/Deactivate Load Management]: Activate/Deactivate load management.
• [Load Management Settings]: Set the load management information.

operating load management information is displayed. Press the [Settings] button to change the load management information.

• [Settings]: Select the chargers to include in load management from the displayed charger list and set the maximum load value to change the load management information.

•  The model and serial number of the product are located on the back and on one side of the product.
  Record them below in case you ever need service.

• MODEL

• SERIAL NO.

Supplier’s Declaration of Conformity

• Trade Name
• LG
• Responsible Party
• LG Electronics USA, Inc.
• Address
• 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
• E-mail
• lg.environmental@lge.com
• Temporary noise is normal when powering ON or OFF this device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>