MRT RF Test Photograph Instructions
- July 5, 2024
- MRT
Table of Contents
MRT RF Test Photograph
Product Information
- Specifications
- Model: 2401TW0104-UT
- Test Type: Emission Test Setup
- Frequency Range: 9kHz – 40GHz
- Test Setup Views: Front, Back, Conducted, Radiated Emission
- Conducted Emission Test Setup
- To perform the conducted emission test, follow these steps:
- Connect the device to be tested to the appropriate ports on the setup.
- Ensure all connections are secure and properly grounded.
- Power on the setup and the device under test.
- Run the emission test according to the specifications provided in the manual.
- Radiated Emission Test Setup
- For radiated emission tests, follow these guidelines:
- Place the device within the specified frequency range on the test setup.
- Adjust the setup for below 1GHz or above 1GHz as required.
- Run the emission test and record the results for analysis.
FAQs
- Q: What is the purpose of a conducted emission test?
- A: A conducted emission test is performed to measure the electromagnetic emissions conducted through interconnecting cables or wiring of a device.
- Q: How do I interpret the results of a radiated emission test?
- A: The results of a radiated emission test indicate the level of electromagnetic radiation emitted by the device within a specific frequency range.
Product Usage Instructions
- Description: Front View of Conducted Emission Test Setup
- Description: Back View of Conducted Emission Test Setup
- Description: Radiated Emission Test Setup for below 1GHz
- Description: Radiated Emission Test Setup for above 1GHz
- Description: Radiated Emission Test Setup for 18GHz~40GHz
- Description: Radiated Emission Test Setup for 9kHz~30MHz
- Description: Conducted Test Setup
- Report No.: 2401W0104-UT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>