EnGenius PDU 6P 12A 100-120V Cloud Managed 1U 12A Smart PDU User Guide
- July 4, 2024
- EnGenius
Table of Contents
EnGenius PDU 6P 12A 100-120V Cloud Managed 1U 12A Smart PDU
Specifications
- Model: ECP106
- Input Voltage: 100-120V
- Maximum Current: 12A
- Outlets: 6 Metered Outlets
- Mounting: 1U Rack Mountable
- Management: Cloud Managed
Product Usage Instructions
Hardware Overview
The PDU ECP106 features 6 metered outlets, a reset button, and LEDs for
status indication.
Hardware Installation
- Choose a suitable location in your rack for mounting the PDU.
- Securely mount the PDU using the provided mounting hardware.
- Connect the PDU to a power source using the appropriate power cable.
Configuration with EnGenius Cloud
- Ensure your network environment supports DHCP for automatic IP assignment.
- Access the PDU’s LCD menu to view the assigned IP address.
- Open a compatible web browser (Google Chrome or Microsoft Edge) and enter the IP address to access the cloud management interface.
PDU 6P 12A 100-120V
Cloud Managed 1U 12A Smart PDU with 6 Metered Outlets
Model: ECP106
Function
- Real-time power consumption monitoring and alarming per outlet
- Remote switching per outlet
- 1.3 inches display for visualizing power information
- Attempt to reconnect from internet outages automatically
- Local and cloud management with analytic reports
- Bracket ears provide different-angle installation
Safety
• 15A circuit breaker from overloading protection
• Fireproof MOV and grounded protection
• FCC, IC, UL1449 certi?cation.
Integration
• RESTFUL API supported
• SNMP v1 2c 3 supported
Content Quick Links
Hardware Overview
Hardware Installation
Configure with EnGenius
Cloud
Package Contents
System Requirements
Web Browser:
- Google Chrome (105.0.5195.127 or later)
- Microsoft Edge (112.0.1722.48 or later)
Network Requirement
Before you get started, please make sure your network environment is DHCP- enabled. EnGenius PDU is assigned with an IP address dynamically by the DHCP server. You could check the given IP address from PDU’s LCD. The IP address is shown under Menu>information.
Hardware Overview
Ports
Reset to default
- Press and hold the reset button for at least 15 seconds. Holding it for less than 15 seconds will only trigger a reboot. The system will restart automatically without any noticeable indication.
- To initiate a factory reset, navigate to the LCD menu and select the “Factory reset” option. The screen will then indicate the resetting process with a progress bar.
LEDs
FAQ
How do I reset the PDU to default settings?
To reset the PDU to default settings, press and hold the reset button for
at least 15 seconds. For a factory reset, navigate to the LCD menu and select
the Factory reset option.
Cloud Managed 1U 12A Smart PDU with 6 Metered Outlets (ECP106)
Introduction
This Quick Start Guide is designed to guide you through installing the PDU
6P 12A 100-120V, model ECP106, including hardware mounting and configuration.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>