EnGenius DuraFon SIP and FreeStyl SIP User Guide
- June 6, 2024
- EnGenius
Table of Contents
EnGenius DuraFon SIP and FreeStyl SIP
Please gather the following information from your SIP service provider, so you have this info ready to enter as you set-up
Register any additional handset to the base unit, then connect SIP base
unit to computer.
On your computer:
Open a web browser to the address below and log-in
The system is set to DHCP, but if Static LAN IP is used, please use these settings
Select Dynamic IP (DHCP) to automatically obtain an IP address of your DHCP Server. Click apply and wait 40 sec for changes to take effect
Once rebooted, connect Base Unit to network switch or router, scan your DHCP client list and identify Base Unit, via the MAC address
Type in new DHCP IP Address on the browser
Once logged in, you can confirm new IP Changes on the LAN Settings list
Go to the VoIP tab and enter the appropriate settings
Enter SIP Account Settings for each Handset
When complete indicator will turn Green
Documents / Resources
|
EnGenius DuraFon SIP and FreeStyl
SIP
[pdf] User Guide
DuraFon SIP and FreeStyl SIP
---|---