ALTEC LANSING MZX1010 Open Wearable Earbuds with Charging Case User Guide
- July 4, 2024
- Altec Lansing
Table of Contents
ALTEC LANSING MZX1010 Open Wearable Earbuds with Charging Case
Product Information
Specifications
- Model: Unknown
- Input: 0.00 $ # ,’+!)’%
- Output: ‘$(&/0&$0 !)0&,)&, ‘&0& )++ 0),)0* -0 +’&0000
- Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment
- FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Product Usage Instructions
Safety Precautions
- Before using the product, carefully read and understand all safety instructions provided in the user manual to avoid any accidents or damage.
Setup
- Place the product on a stable surface and ensure all connections are secure and properly inserted.
Power On
- Press the power button to turn on the device. Check that the indicator lights are functioning correctly.
Operation
- Refer to the user manual for specific operation instructions based on the desired function of the product.
Maintenance
- Regularly clean the product using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the device.
FAQ
Q: Can the device be used in all environments?
A: The device can be used in portable exposure conditions without restriction as per FCC guidelines.
WELCOME
- Thank you for purchasing an Altec Lansing product. Download our
- App to unlock all the features our products have to offer!
In the Box
- CLIP Open Wearable Earbuds with Charging Case
- USB-C Charging Cable
A Closer Look
Charging
- Note: Make sure that both the earbuds and charging case are fully charged before first use.
Powering On
- For the first use, please remove the earbuds from the case and remove any stickers (if applicable) covering the earbuds’ charging contacts. Next, place the earbuds back in the case then remove them from the case. This will activate earbuds.
- To turn on, place earbuds into the case then remove them from the case. To turn off, place the earbuds into the case.
- If the LEDs do not turn on when the earbuds are removed from the case, charge the case then try again. If the earbuds do not pair together, perform the Manual Reset function.
Bluetooth Pairing
- Take the earbuds out of the charging case and they will turn On.
- Go to the Bluetooth settings menu on your phone.
- Make sure Bluetooth is turned on.
- Connect to the device listed as “AL CLIP OWS
- Your earbuds will audibly say “Connected” once they are paired with your phone.
Touch Button Functions
Press:
- Play and Pause
- Answer Calls
Press and Hold (2 Seconds):
- Decline Call/End Calls
- Voice Assistant
Press Twice:
- Next Track (Right Earbud)
- Previous Track (Left Earbud)
- To use a phone’s voice assistant, you must have a compatible phone.
- Your wireless earbuds will not work with your phone’s voice assistant if the assistant is not first enabled within the settings on the phone. For more information, see your phone’s user manual.
- You must be within Bluetooth® range to use your phone’s voice assistant via your wireless earbuds.
Manual Reset
Only do this function when experiencing issues that are not solved by simply turning the earbuds On and Off/ placing them back into the case.
- Disconnect the earbuds from your phone.
- Put both earbuds into the charging case.
- Press the button touch area five times for both earbuds at the same time to clear the pairing record.
- Take the earbuds out of the charging case and pair them with the device.
- For additional user materials and warranty information, please visit alteclansing.com
Notes
- To use a voice assistant, you must have a phone that is equipped with a voice assistant.
- You must be within Bluetooth range to use voice assistant via your Wireless Earbuds.
- Your Wireless Earbud’s voice assistant feature will not work if a voice assistant is not first enabled within the settings on the phone. For more information, see your phone’s user manual.
- For additional user materials and warranty information, please visit alteclansing.com
FCC
FCC ID:2ALHZT41
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit are not expressly approved by the part responsible for compliance and could void the user’s authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet the general RF exposure requirement
The device can be used in portable exposure conditions without restriction
Do Not Return the Card
- IMPORTANT PLEASE DO NOT RETURN TO STORE
- If You’re Having Trouble, We’re Here to Help!
STOP
- Call us 24/7 at 1-855-292-4087
- E-mail us at alsupport@sakar.com or visit us at alteclansing.com
REGISTER YOUR PRODUCT
- To receive news, exclusive deals, OTA or firmware updates, warranty information, and more please register your product at alteclansingsupport.com
- Company name: Sakar International Inc.
- Address:195 Carter Drive, Edison, NJ 08817, USA
- Tel:800.637.1090 × 340
- E-mail: dleitao@sakar.com
12-Month Limited Warranty
- All Altec Lansing products come with a 12-month month-limited warranty from the date of their original purchase 24 Hour Customer Support
- We love our customers, and we care about the young. if you need Altec assistance, please call us at 1.855.292.4087
- or e-mail alsupport@sakar.com
- www.alteclansing.com
- Altec Lansing Edison, NJ 08817
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>