CENTEK CT-1627 Meat Grinders Instruction Manual
- July 4, 2024
- CENTEK
Table of Contents
- CT-1627 Meat Grinders
- SAFETY PRECAUTIONS
- APPLIANCE DESCRIPTION
- SCOPE OF SUPPLY
- OPERATING PROCEDURE PREPARATION
- MAINTENANCE
- SPECIFICATIONS
- DISPOSAL OF THE APPLIANCE
- CERTIFICATION DATA, GUARANTEE
- MANUFACTURER AND IMPORTER INFORMATION
- GUARANTEE MAINTENANCE TERMS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CT-1627
MEAT GRINDER INSTRUCTION MANUAL
CT-1627 Meat Grinders
Dear Customer,
Thank You for purchasing a CENTEK brand product. We guarantee flawless
function of this item, provided the guidelines of its operation are observed.
The meat grinder is a household appliance and is not intended for industrial
use!
PURPOSE OF THE APPLIANCE: for making minced meat and fine chopping of other
foods.
SAFETY PRECAUTIONS
The appliance purchased by You complies with all safety standards applicable
to electric appliances in the Russian Federation.
The following requirements should be strictly observed in order to avoid
situations hazardous for human life and health, as well as premature failures
of the appliance:
- Carefully read the present manual prior to operating the appliance.
- Retain the present manual.
- Ensure that the power supply grid voltage corresponds to the one indicated on the appliance before operating it.
- Do not use accessories and spare parts other than supplied by the Manufacturer. If such parts are used the Manufacturer’s warranty will become void.
- Do not operate the appliance if its power cable, plug and other parts are damaged.
- In case of power cable damage it should be replaced, to avoid dangerous situations, by the Manufacturer, a service centre or similar skilled personnel.
- Before starting operation thoroughly clean the parts of the appliance that may contact with food.
- After use immediately disconnect the appliance from the electric socket.
- Do not leave the operating meat grinder unattended.
- Disconnect the appliance from power supply before removal or installation of any accessories.
- Wait until the moving parts of the appliance com to a complete stop before removal of any parts.
- Never submerge the appliance in water or other liquids, do not wash it under a tap! Use only damp cloth for cleaning.
- Do not try to grind bones, nuts and other hard objects.
- Do not reach with your fingers inside the grinder head. Use only the pusher supplied with the grinder.
- Do not operate the appliance continuously for more than 10 minutes.
- A user manual with safety instructions is included with the accessories.
- Use the appliance only for its intended purpose to avoid emergencies.
- The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to let children play with the appliance.
- If the grinder is blocked, press the «РЕВЕРС» (REVERSE) button. The grinder head will be freed from meat due to backwards rotation, after which normal operation can be restarted.
- Special instructions for transportation (shipment) and sale: none.
- Should You decide to transfer the appliance to another person, please pass the present manual over along with it.
ATTENTION! This appliance is equipped with a thermostat which
automatically turn the appliance off in case of overheating.
If the appliance suddenly stops operating:
– Pull the plug from the electric socket.
– Turn the appliance off by pressing the ON/OFF button.
– Let the appliance cool down for 1 hour.
– Connect the power cable to the electric socket.
– Turn the appliance on again.
If the thermostat trips too often, apply to the Vendor or an authorized
service centre.
APPLIANCE DESCRIPTION
- Loading tray
- Lock button
- «ВКЛ/ВЫКЛ» (ON/OFF) and «РЕВЕРС» (REVERSE) button
- Sausage nozzle
- Kebbe nozzle
- Head nozzle
- Motor unit
- Pusher
- Knife
- Cap nut
- Auger
- Disk 5 mm
- Disk 7 mm
- Shredder Pusher
- Shredder housing
- Slicer attachment
- Large grater
- Fine grater
SCOPE OF SUPPLY
– Electric meat grinder – 1 pc.
– Grinder head – 1 pc.
– Auger – 1 pc.
– Pusher – 1 pc.
– Blade – 1 pc.
– Grinder plate – 2 pcs.
– Ring nut – 1 pc.
– Hopper – 1 pc.
– Sausage attachment – 1 pc.
– Kibbeh attachment – 1 pc. (2 parts)
– Operating Manual – 1 pc.
– Shredder pusher – 1 pc.
– Shredder housing – 1 pc.
– Chopper nozzle – 3 pcs.
OPERATING PROCEDURE PREPARATION
– Ensure that the appliance is turned off before connecting it to power
supply.
– Before grinding meat ensure that all bones and excessive fat has been
removed.
– Do not attempt to grind hard or fibrous foods (like ginger or horseradish).
– If a hard piece of food causes the auger to stop, immediately turn the unit
off and use the reverse function.
ASSEMBLY
– Press the latch button, take the grinder head by the intake tube and align
it with the motor coupling on the grinder body, taking care that the intake
tube is slanted in the direction of the arrow on the top of the grinder body,
then rotate the head counterclockwise until it is securely locked.
– Insert the auger into the head, long axle first, and rotate it slightly
until it engages with the motor shaft.
– Put the blade on the auger axle with the cutting edges facing you. If the
blade is not install correctly the meat will not be cut.
– Install the desired grinder plate in front of the blade, aligning it with
the lugs on the grinder head.
– Holding the plate from falling off with one hand, set and tighten the ring
nut with the other hand. Avoid overtightening the nut.
– Install the hopper on the grinder head and seat it firmly in the operating
position.
– Place the appliance on a stable surface.
– Do not obstruct the free flow of air at the bottom and sides of the motor
unit. Avoid blocking the ventilation holes on the bottom and side of the motor
unit.
SLICER
– Press the lock button, take the chopper housing by the receiving tube and
connect it to the connector, make sure that the tube is tilted in the
direction of the arrow on the top of the housing, then turn the housing
counterclockwise until it is securely fixed.
– Choose the blade you want. (Large, small shredding blade or slicer)Put the
products in a plastic tube.
– Turn on, push the products through with a pusher.
MAINTENANCE
– The meat trapped inside the auger can be driven out by grinding a piece of
bread.
– Before cleaning turn the appliance off and disconnect it from power supply.
– Press the latch and remove the grinder head. Remove the pusher and hopper.
– Unscrew the ring nut and take all parts out of the grinder head. Do not
place grinder parts in a dishwasher!
– Wash all parts contacting with meat in hot water with soap. Clean the
grinder immediately after use.
– Rinse the parts in clean cold water and let them dry.
– It is recommended to lubricate the blade and grinder plates with a small
quantity of vegetable oil.
SPECIFICATIONS
– Rated voltage: 220-240 V ~50/60 Hz
– Nominal power rating: 300 W
– Max. power rating: 2000 W
– Output capacity: 2 kg/min
DISPOSAL OF THE APPLIANCE
Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.
CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end
user, provided the item will be used in strict accordance with the present
manual and the applicable technical standards. Upon expiry of the service life
please contact the nearest authorized service centre for suggestions as to
further operation of the appliance. The manufacturing date of the appliance is
integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 –
month of manufacture). If any questions related to appliance maintenance
should arise, or if the appliance has malfunctions, apply to the CENTEK TM
Authorized Service Center. The address of the service center can be found on
the website https://centek.ru/servis
Service support contacts:
Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd.
General Service Center:
OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity No.
№ ЕАЭС RU С HK.АЖ49.В.03226/23 of 21.12.2023.
MANUFACTURER AND IMPORTER INFORMATION
I mpo rted to EAEU by: OOO «Larina-Elektroniks». Address: Russia, 350080
Krasnodar, ul. Demusa, 14. Phone: +7 (861) 2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of
sale to the end consumer. With this Warranty Card the Manufacturer confirms
the proper condition of the appliance and undertakes to repair, free of
charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
-
The guarantee shall be valid if the following documentation conditions are observed:
– The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous. -
The guarantee shall be valid if the following operation conditions are observed:
– the appliance is used in strict accordance with the present manual;
– the safety rules and requirements are observed. -
The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
-
The guarantee does not apply in the following cases:
– mechanical damage;
– normal wear of the appliance;
– non-observance of operation requirements or erroneous actions on the part of the user;
– improper installation or transportation;
– natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
– ingress of foreign objects, liquids or insects into the inside of the appliance;
– repairs or modifications to the appliance by unauthorized persons;
– use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
– failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
– for battery-powered appliances – operation with inappropriate or depleted batteries;
– for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging. -
The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
-
The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
-
Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).
The Manufacturer reserves the right to change the design and specifications of
the appliance without prior notice.
Attention! Please ask the seller to fill out the warranty card and tear-
off coupons in full. The ticket is valid in the presence of all stamps and
marks.
Product ———————–
Model————–
Serial number———-
Date of sale————–
These tear-off coupons are filled in by a representative of the seller
Product ————–
Model————
Serial number——————
Date of sale————
Vendor———–
Selers address ————
Full name and phone number of the buyer
These tear-off coupons are filled in by a representative of the service center
TYPE OF REPAIR———–
DATE OF RECEIPT ————–
RELEASE DATE ——————-