fifine M8 Wireless Lavalier System with 2 Microphones User Manual

fifine M8 Wireless Lavalier System with 2 Microphones

Product Information

Specifications

• Microphone x2
• Receiver x1
• Type-C cable (30cm) x1
• User’s Manual

Product Usage Instructions

Quick Start Guide
For Android phones/tablets:

1. Press and hold the power button on the microphone for 3 seconds until the indicator light blinks blue.
2. Plug the receiver into the Type-C port on your phone/tablet.
3. The microphone will pair with the receiver within 5 seconds. The light will stay on when connected. If not, refer to the manual for manual reset instructions.
4. Open the camera/recording app on your phone/tablet to test the microphone. You can also listen to playback using the built-in speaker or plug-in earphones.

For iPhone/iPad:
Requires a genuine Apple Lightning (male) to USB (female) adapter and a USB (male) to Type-C (female) adapter for connecting the receiver to the iPhone/iPad. Adapters are not included.

Operating Range

• Indoor: 65ft (maximum)
• Outdoor: 50ft (maximum)

Tips:

• The range may be affected by obstacles such as large metal objects.
• If you exceed the recommended range, the mic and receiver indicators may blink blue due to losing connection.

Monitoring
Plug the earphone (Type-C connector) into the microphone or receiver for real- time monitoring. You will hear both the sound of your device and the microphone. Different indications will be heard based on the operation.

Frequently Asked Questions (FAQ)

• Q: What should I do if the receiver light is off?
  A: Check if you need to enable OTG from the phone settings to supply power for the receiver. Ensure a secure connection without any obstacles.

• Q: Can I adjust the input volume of the mic and monitoring?
  A: No, the input volume of the mic and monitoring cannot be adjusted.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please
contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

What’s in the box

• Microphone x 2
• Receiver x 1
• Type-C cable (30cm) x 1
• User’s Manual

Microphone

1. Windscreen
2. Indicator light
   • Mute (red light)
   • Low battery (red light blinking)
   • Fully charged (green light)
   • Paired (blue light stays on)
   • Unpaired (blue light blinking)
3. Power button
   • Press: Mute/Unmute
   • Press and hold for 3 seconds: ON/OFF
4. Clip: 360° adjustable
5. Type-C port: Charging/Monitoring

Receiver

1. Indicator light
   • Paired (blue light stays on)
   • Unpaired (blue light blinking)
2. Type-C connector
3. Type-C port: Charging/Monitoring
4. Pairing button (inside the hole)

Quick Start

For Android phones/tablets

1. Press and hold the power button on the microphone for 3 seconds until the indicator light blinks blue.
2. Plug the receiver into the type C port on your phone/tablet.
3. The microphone will pair with the receiver within 5 seconds. (The light will stay on when connected.) If it doesn’t, please reset the mic set manually (refer to pages 10- 11).
4. After the microphone is connected, open the camera/recording app on your phone/tablet to test the microphone. You could use these ways to listen to playback.

Unplug the receiver and listen to playback from the built-in speaker of the phone/tablet.

Plug the earphone in the Type-C port on the microphone/receiver.

Use Bluetooth earphones.

Tips: If the receiver light is off, please check if you need to enable OTG from the phone settings so that your phone will supply power for the receiver. If there’s a poor connection due to the phone case, please remove it and make sure the receiver is plugged all the way in your phone/tablet.

The input volume of the mic and monitoring cannot be adjusted.

For iPhone/iPad
You need a genuine Apple Lighting (male) to USB (female) adapter and a USB (male) to Type-C (female) adapter for connecting the receiver to the iPhone/iPad (Adapters are not included)

Operating Range

Indoor: 65ft (maximum)
Outdoor: 50ft (maximum)

Tips:

• The range may be affected by obstacles such as large metal objects.
• If you go beyond the suggested range, the indicator on the mic and receiver may blink blue because of losing connection.

Monitor

Plug the earphone (Type-C connector) into the microphone or receiver for real- time monitoring. You will hear both the sound of your device and the microphone.
When the earphone is plugged into the microphone (not the receiver), you will hear these indicating words during the operation.

1. Power on (when you turn on the mic)
2. Power off (when you turn off the mic.)
3. Connected (when the mic pairs with the receiver)
4. Disconnected (when the mic doesn’t pair with the receiver)
5. Mic off (when you mute the mic)
6. Mic on (when you unmute the mic)

Tips:

• If your earphone has a 3.5mm connector, you will need a Type C (male) to 3.5mm (female) digital-to-analogue adapter. (This adapter is not included).
• If your headphone transmits a digital signal, it may be not compatible with this mic, and you may not be able to hear the sound of the mic.

Restore to factory settings

If the indicator light keeps blinking blue (unpaired), please follow these steps to reset.

1. Unplug the receiver and turn off the microphone.
2. Turn on the microphone and plug the receiver into your phone/tablet. (The indicator light on the receiver and microphone becomes blinking.)
3. Use a pin to press the pairing button inside the tin hole on the receiver.
4. The blue light on the receiver will stop blinking for approximately 1 second. At this time, press the power button on the microphone twice in a row quickly.
5. A few seconds later, the flashing light on the receiver and microphone will stay on and the receiver pairs with the microphone successfully.

Charge

1. The microphone has a built-in battery. The indicator light will turn green when it’s fully charged. It can last for 5-6 hours after charging 2 hours.
2. The receiver doesn’t have a built-in battery. It relies on the phone/tablet for power. You could also use the Type-C port to charge your phone while using the mic to avoid low battery. (Note: iPhone/iPad and some of the Android phones do not support this function.)

Tips: After the receiver disconnects from the device for 5 minutes, the mic will shut down by itself to save power.

Specification

• Frequency 2.4GHz ~ 2.483GHz
• Polar Pattern Omnidirectional
• Power Supply 5V
• Sensitivity -32dBV (1KHz 94dBSL)
• Sampling Rate Conversion 16bit/48KHz
• Max. SPL 108db
• Frequency response 50Hz ~ 15kHz

Operating Notes

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and Directive 2011/65/EU amended (EU) 2015/863.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>