VigilLink VLSP-41H21 8K HDMI 4×1 Switcher User Manual
- July 3, 2024
- VigilLink
Table of Contents
VigilLink VLSP-41H21 8K HDMI 4×1 Switcher
Specifications
- Product: 8K HDMI 4×1 Switcher
- Model: VLSP-41H21
- Version: 1.0
Product Information
Features
- HDMI 2.1 and HDCP 2.3 compliant
- Support 48Gbps video bandwidth
- Video Resolutions: 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG passthrough
- VRR, FVA, ALLM support
- Support HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, DTS-HD Master Audio
- 4×1 switch output with auto switch support
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
Package Contents
(Not provided in the text) Operation Controls and Functions (Detailed information provided in the text)
Connection Details
- 4 x HDMI INPUT [Type A, 19-pin female]
- 1 x HDMI OUTPUT [Type A, 19-pin female]
Power Supply
DC 5V/1A Power input port.
Notes:
- If you need to use the switcher to output signals of 4K@120Hz or 8K@60Hz, ensure all your HDMI equipment supports these resolutions.
- Avoid using overly long HDMI cables to prevent screen flickering.
Product Usage Instructions
Connection Steps:
- Connect HDMI source devices (e.g., DVD player, PS5) to the INPUT ports using HDMI cables.
- Connect the HDMI display device (e.g., TV, Monitor) to the OUTPUT port using an HDMI cable.
Operation:
- Use the INPUT button to select the desired signal source.
- Long press the INPUT button for 3 seconds to enable auto-switching mode.
IR Remote:
Press the corresponding IN1/2/3/4 button on the remote to select the HDMI signal source.
FAQ
Q: What length of HDMI cables is recommended for optimal performance?
A: For different resolutions, it is recommended to use specific lengths of HDMI cables:
- 8K60, 8K30, 4K120: Ultra HDMI2.1 cable, IN/OUT 2 meters.
- 4K60 4:4:4: HDMI2.0 cable, IN/OUT 3 meters.
- 4K60 4:2:0, 4K30, 1080P: HDMI cable, IN/OUT 5 meters.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended.
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
This 8K HDMI 4×1 Switcher can switch any of 4 HDMI sources to 1 HDMI display. It supports video resolution up to 8K@60Hz 4:2:0, 48Gbps video bandwidth. It is suitable for outdoor display, video conference, security monitoring, home theater and other applications. By using this HDMI 8K switcher, you are allowed to connect from four HDMI INPUT ports to four HDMI source devices via an individual HDMI cable, then connect from HDMI OUTPUT port to your external monitor (such as HDMI projector, HDMI TV or HDMI ordinary display). You can switch between four sources by pressing the switch button on the front panel of the switcher. Please pay attention that this switcher is not a bi- directional switcher, you can only use from four sources to one display (only 4 in 1 out, not 1 in 4 out). It can work well with xbox or PS5 to achieve 4K@120hz on your TVs or relative monitors.
Features
- DMI 2.1 and HDCP 2.3 compliant
- Support 48Gbps video bandwidth
- 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit video support
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM support
- Support HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HDMaster Audio
- 4×1 switch output, auto switch is supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
Package Contents
- 1 × 8K HDMI 4×1 Switcher
- 1 × IR Remote
- 1 × 5V/1A Multinational Power Supply
- 1 × User Manual
Specifications
Operation Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | When the device is powered on, the white power LED is on. |
| 2 | INPUT LED |
(1~4)
| When the INPUT 1/2/3/4 port is selected as the signal source input channel,
the corresponding white LED will be on.
3| AUTO LED| When the auto-switching mode is enabled, the corresponding white
LED will be on.
4| IR Window| IR input signal receiving window.
5
| INPUT
button
| ▪ Short press this button to circularly select the signal source.
▪ Long press this button for 3 seconds to enable the auto-switching mode.
| 6 | DC 5V | DC 5V/1A Power input port. |
|---|---|---|
| 7 | INPUT port |
(1~4)
| HDMI signal input ports, connected to HDMI source device such as DVD or PS5
with an HDMI cable.
8| OUTPUT
port
| HDMI signal output port, connected to HDMI display device such as TV or Monitor with an HDMI cable.
Notes:
- If you need to use the switcher to output signals of 4K@120Hz or 8K@ \60Hz, please make sure that your HDMI cable, HDMI signal source and \HDMI display all support the above resolution.
- The length of the HDMI cables connected to both ends of the switcher should not be too long, otherwise, it will easily cause the screen to flicker.
The following HDMI cables are suggested.
- 8K60, 8K30, 4K120: Ultra HDMI2.1 cable, IN/OUT 2 meters.
- 4K60 4:4:4: HDMI2.0 cable, IN/OUT 3 meters.
- 4K60 4:2:0, 4K30, 1080P: HDMI cable, IN/OUT 5 meters
IR Remote
IN1/2/3/4 :
Press the IN1/2/3/4 button to select HDMI signal source INPUT 1/2/3/4 to the OUTPUT port.
Press this button to cyclically switch the HDMI signal source IN 1/2 to the OUT port
Application Diagram
- The terms HDMI and HDMI High-Definition Multimedia interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>