DOUXE DXM2 Monitor Stand Instruction Manual

DOUXE DXM2 Monitor Stand

Product Specifications

• Product Name: DXM2 – Monitor stand
• Compatibility: Suitable for monitors with VESA mounting capabilities
• Installation Options: Desk Clamp or Grommet Base Install
• Material: High-quality metal components
• Color: Black

Product Usage Instructions

Unpacking Information
Carefully unpack the contents, ensuring all parts are present and undamaged. Lay out the parts for easy identification during installation.

Safety Information
Follow the instructions explicitly to avoid incorrect assembly or mounting, which may lead to injury or damage.

Installation

Step 1: Install the Pole to the Desktop
Option A: Desk Clamp Install

1. Attach C Clamp Brace to the Pole using M5x14 Bolts and Allen Key.
2. Attach Soft Pad to the C Clamp Brace.
3. Install the C Clamp to the pole assembly and tighten using
   M8x12 Bolts and Allen Key. Secure to the desktop using the plastic knob.

Option B: Grommet Base Install

1. Install Grommet Base Plate to the Pole using M5x14 Bolts and Allen Key.
2. Attach Soft Pad to the Grommet Base Plate.
3. Position the Pole on the mounting surface and secure using Support Plate, M10 Washer, Spring Washer, and M10 Bolt.

Option C: Grommet Base Install (Self Drilled Grommet Hole Installation)

1. Drill a 3/8 (10mm) diameter hole at the marked position on the mounting surface.
2. Install Grommet Base Plate to the Pole using M5x14 Bolts and Allen Key.
3. Attach Soft Pad to the Grommet Base Plate.
4. Position the Pole on the mounting surface and secure using Support Plate, M10 Washer, Spring Washer, and M10 Bolt.

Step 2: Install Arm to the Pole
Attach Swivel Arm to the Pole using the provided bolt and Allen Key. Secure Wire Clip to the Pole and Swivel Arm.

Step 3: Attach the VESA Plate to the Monitor
Attach VESA Plate to the monitor based on whether it has a flat back or a curved/recessed back.

Frequently Asked Questions (FAQ):

• Q: What should I do if I find damaged parts in the package?
  

  • A: Do not use damaged or defective parts. Contact customer  support for assistance.

• Q: Can I use this product for configurations not specified in the instructions?
  

  • A: Do not use this product for any purpose or configuration not explicitly specified in the instruction manual to avoid safety risks.

DXM2 – Monitor stand

Instruction Manual

UNPACKING INFORMATION
Carefully open the carton packaging minding the paper cuts the packaging can possibly cause. Remove the contents and lay them out, so it will be easy to find the parts during the installation. To be sure every part is delivered, please check the contents of the package against the supplied parts list on page 3., to ensure that all components are received and undamaged. Do not use damaged or defective parts. Lastly please carefully read all instructions before attempting installation.

SAFETY INFORMATION

• Please do not begin installation until you have thoroughly read and understood these instructions.
• Do not exceed the maximum load capacity for this product.
• Improper installation may cause property damage and/or personal injury
• This product contains small parts that may constitute choking hazards. Please keep these items as well as the product packaging away from children.
• Please make use of proper safety equipment during installation.
• To enable proper support and handling, it is recommended that two people perform this installation.
• Please consult a qualified contractor or installation specialist in the case of any uncertainty or ambiguity.

Do not use this product for any purpose or any configuration not explicitly specified in this instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Parts List

Step 1 Install the Pole to the Desktop\

Option A: Desk Clamp Install

1. Install the “C” Clamp Brace(c) to the Pole (a) using 3pcs M5x14 Bolts(f), and tighten using the Allen Key(o),see Figure 1.
2. Attach Soft Pad(t1) to the “C” Clamp Brace(c), see Figure 2.
3. Install the “C” Clamp(b) to the pole assembly according to the thickness of the desktop. The thickness can be changed to three positions. Connect it using 2pcs M8x12 Bolts(g), and tighten using the Allen Key(o). Tighten the “C” Clamp to the desktop using the plastic knob, see Figure 3.

Option B: Grommet Base Install

Existing Grommet Hole Installation
If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount.

1. Install the Grommet Base Plate(m) to the Pole(a) using 3pcs M5x14 Bolts(f), and tighten using the Allen Key(o), see Figure 4.
2. Attach Soft Pad(t2) to the Grommet Base Plate(m), see Figure 5.
3. Position the Pole(a) on the mounting surface and secure using the Support Plate (j), M10 Washer(k), Spring Washer(l) and M10 Bolt(i). Fasten the M10 Bolt using provided Wrench(p), see Figure 6.

Step 1 Install the Pole to the Desktop

Option C: Grommet Base Install

Self Drilled Grommet Hole Installation

1. Position the Pole(a) on the mounting surface and mark the center hole. Drill a 3/8″ (10mm) diameter hole at the marked position through the mounting surface.
2. Install the Grommet Base Plate(m) to the Pole(a) using 3pcs M5x14 Bolts(f), and tighten using the Allen Key(o), see Figure 7.
3. Attach Soft Pad(t2) to the Grommet Base Plate(m), see Figure 8.
4. Position the Pole(a) on the mounting surface and secure using the Support Plate (j), M10 Washer(k), Spring Washer(l) and M10 Bolt(i). Fasten the M10 Bolt using provided Wrench(p), see Figure 9.

Step 2 Install Arm to the Pole

• Slide the monitor onto the head of Swivel Arm(d) as shown in the above diagram.
• Install the security Nut(h). Make sure the security nut is installed before you rotate the monitor.

• Tighten the bolt with the supplied Allen Key(o) to fix the tilt angle.
• If one monitor is lower, remove the Nut(h) and turn the bolt counter-clockwise with supplied Allen key(o) to raise the monitor. Install the Nut(h) after the adjustment.

• Use the supplied Allen Key(o) to make the necessary adjustments.
• Manage the wires and store the Allen keys(o) in Wire Clip(n1) for future use.

SERVICE AND WARRANTY

Douxe provides a 2-year warranty on its products. To get service during the warranty period, the product needs to be returned with a proof of purchase. Product defects must be reported within 2 years from the date of purchase. This warranty does not cover: damages caused by misuse or incorrect repair; parts subject to wear; defects that the customer was aware of at the time of purchase; damages or defects caused by customer neglect; damages or defects caused by third parties.

DISPOSAL – RECYCLE
Contribute to a cleaner living environment! Do not dispose of the Monitor stand with the household waste. For proper recycling, please contact your local authority or your household waste disposal service for further details on your nearest designated collection point.

DISCLAIMER
Changes reserved; specifications are subject to change without stating grounds for doing so.

• Douxe
• Koperstraat 26
• 3067GL Rotterdam
• The Netherlands
• KVK: 80934382
• Contact: Info@douxe.nl
• Website: www.douxe.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>