Thermador MD24BS 24 Inch Microdrawer Microwave Owner’s Manual
- July 3, 2024
- Thermador
Table of Contents
Thermador MD24BS 24 Inch Microdrawer Microwave
FEATURES & BENEFITS
- Easy touch to automatic “open” and “close” enables handsfree operations
- Concealed drop-down panel effortlessly opens to a convenient 60° angle for easy readability and operation
- Connect to your Micro Drawer® for remote monitoring with ability to open drawer and access recipes via the Home Connect® app
- Spacious and easy to clean enameled cavity with 1.2 cu. ft. interior fits a 20 oz. cup or a 13″ x 9″ pan
- Achieve a perfectly flush installation in any standard depth cabinetry
- Sensor Cooking is designed to effortlessly manage humidity levels, automatically adjusting cooking time and intensity for optimal results every time
- 10 versatile Microwave Programs, including melt, warm, and soften to accomplish culinary tasks of all sizes with ease
GENERAL PROPERTIES
Cavity Color| White
Microwave Power| 950 W
CAPACITY
Cavity Capacity| 1.2 cu. ft
TECHNICAL DETAILS
Watts| 1,500 W
Circuit Breaker| 15 A
Volts| 120 V
Frequency| 60 Hz
Plug Type| 120V-3 Prong
Power Cord Length| 48″
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (HxWxD)| 16 5/16″ x 23 7/8″ x 23 3/8″
Required Cutout Size (HxWxD) – Standard Install| 15 9/16″ x 22 1/8″ x 23 1/2″
Required Cutout Size (HxWxD) – Flush Install| 16 5/8″ x 24 3/16″ x 23 1/2″
Net Weight| 74 lbs.
WARRANTY
Limited Warranty, Entire Appliance, Parts and Labor| 2 Year
PRODUCT DIMENSIONS
Measurements in inches (mm)
STANDARD INSTALLATION
A: Recommended location of electrical outlet
B : Anti-tip block
C: Base should support up to 100 lb
D: Front view of cut-out
E: Overlap
F: Visible area
If under a counter, minimum clearance to counter top should be 7 /16″ (11 mm)
Measurements in inches (mm)
FLUSH INSTALLATION
A: Recommended location of electrical outlet
B : Anti-tip block
C : Base should support up to 100 lb
D: Base depth
E: Front view of cut-out
F : Sides should be finished and extend back to cleat
Cleats should also be finished, as they may be visible after installation
G : Base thickness
H : Visible area
If under a counter, minimum clearance to counter top should be 7 /16″ (11 mm)
Measurements in inches (mm)
These warranties give you Specific legal rights that vary from state Limited
warranty from date of delivery. For complete warranty details, refer to your
Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation
instructions and consult your countertop supplier prior to making counter
opening. Consult with a heating and ventilation engineer for your specific
ventilation requirements. For the most detailed information, refer to
installation instructions accompanying product or write to Thermador
indicating the model number. Specifications are correct at time of printing.
Thermador reserves the right to change product specifications or design
without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S.
for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2024 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>