BETSTCO FH-PHD Post Hole Digger User Manual
- July 3, 2024
- BETSTCO
Table of Contents
BETSTCO FH-PHD Post Hole Digger User Manual
SAFETY
POST HOLE DIGGER
- Read the PHD operator’s manual. Any person who has not read and understood all operating safety instructions is not qualified to operate this machine. Failure to do so could result in serious injury or death and equipment damage.
- Become familiar with all the machine’s controls and all the caution, warning and danger decals affixed to the machine before attempting to start or operate.
- Do not allow children to operate PHD. Do not allow adults to operate PHD without proper instructions.
- Before starting or operating the machine, make a walk around inspection and check for obvious defects such as loose, damaged or worn components. correct any deficiency before starting.
- Do not operate without all guards and shields in place and in good condition.
- Do not operate with worn, broken or missing auger point and cutting blades.
- Never use unspecified long pins, bolts, or bars to replace driveline shear bolts, pins or auger bolts. Avoid serious injury or death from entanglement in this long protruding part and damage to driveline, gearbox or auger.
- Clear the work area of objects which might be picked up, thrown or be entangled in the auger.
- Keep the area of operation clear of all persons particularly small children and pets. Stop operation whenever any one comes within the operating area.
- Never operate PHD with anyone near or in contact with the PHD, PTO driveline, or auger.
- Keep body parts, hands and feet clear of auger, PTO driveline and gearbox during operation.
- Do not transport persons on tractor or PHD.
- Do not use body weight to force PHD auger into ground during digger operation or locate auger when turning.
- Shut off power and stop auger when transporting.
- Do not raise PHD more than 12 inches off the ground with the tractor PTO engaged.
- Consult local utility companies before digging to make certain there is no buried gas lines, water lines, electrical cables, etc., in the work area.
EMPLOYEE TRACTOR OPERATING INSTRUCTIONS:
- Securely fasten your seat belt if the tractor has one.
- Watch where you are going, especially at row ends, on roads, and around trees.
- Do not permit others to ride on the tractor, especially near ditches, embankments, and holes.
- Operate the tractor smoothly – no jerky turns,
- Reduce speed when turning, crossing slopes, and starts, or stops.
- Hitch only to the drawbar and hitch points recom
- When tractor is stopped, set brakes securely and use park lock if available.
INTRODUCTION
Your post hole digger has been carefully designed to give maximum service with minimum down time. This manual is provided to give you the necessary operating and maintenance instructions for keeping your post hole digger in top operating condition. Please read this manual thoroughly. Understand what each control is for and how to use it. Observe all safety precautions decaled on the machine and noted throughout the manual for safe operation of implement.
NOTE
All references made in this manual to right, left, front, rear, top, or bottom is a s viewed facing the direction of forward travel with implement properly attached to tractor.
DESCRIPTION
The post hole digger mounts to the tractor three-point hitch and is powered by the PTO drive. Power from the PTO is transmitted through a reduction gearbox to the auger.
OPERATING INSTRUCTIONS
GENERAL SAFETY
Only qualified persons should operate this machine. Operator should wear safety glasses, safety shoes, and work gloves. It is recommended that tractor be equipped with Rollover Protective System (ROPS) and a seat belt be used. Before beginning operation, clear work area of objects that could wrap around auger. Check for ditches, stumps, holes, or other obstacles that could upset tractor. Always tum off tractor engine, set parking brake, and allow auger to come to a complete stop before dismounting tractor.
ATTACHING TO TRACTOR
A. Attach tractor lift arms to post hole digger mast.
B. Remove tractor 3-Point hitch top link. Pin boom into tractor top link
hole. Start with the pin through the lowest holes. When the boom is fully
raised, there should be adequate clearance between the auger point and the
ground for transporting. After attaching to your tractor 3-point hitch, the
pivot pin may need to be repositioned.
C. Pull driveline apart. Attach free end to tractor PTO shaft.
D. Raise and lower post hole digger to determine position with greatest
distance between PTO shaft and gearbox input shaft. Shut down tractor leaving
implement in position of greatest distance.
E. Hold driveline sections parallel to each other and check for minimum 6
inches (15 cm) overlap. If driveline has less than minimum overlap, do not
use. Contact Bitstock.
F. Reassemble driveline and attach to tractor.
G. Connect/adjust stabilizer bars, sway chains or equivalent and level
lower lift arms. Refer to tractor operator’s manual.
TRANSPORTING
Do not engage tractor PTO drive with post hole digger fully raised to
transport position. When implement is transported on road or highway, day or
night, use tractor flashing warning lights unless prohibited by law. A slow
moving vehicle (SMV) sign must be visible from the rear by approaching
vehicles. Do not exceed 15 mph (24 kph).
NOTE
F. If at any time the auger fails to dig, check for the following:
- Grass, roots or clay lodged around blades.
- Foreign objects such as tin cans or wire hung on blades.
- Point or blades loose or excessively worn.
- Tractor lift arms not allowing auger to penetrate full depth with ease.
DISLODGING AUGER THIS STEP IS DONE ONLY WITH THE TRACTOR SHUT OFF.
If auger becomes lodged on an obstruction below ground, to prevent damage to the yoke and boom, do not attempt to raise auger by hydraulic lift power alone until auger has been turned several revolutions in reverse. A chain wrench may be used on the auger to dislodge from obstruction. After auger is freed, apply lift power and slowly rotate PTO shaft to raise auger.
PARKING STAND OPERATION
Lower the digger point to the ground and slowly drive For easier attaching and
detaching of your post hole, move the tractor forward while lowering the lift
arms until the digger, the optional parking stands are very conve-pipe legs
and arm weldments contact the ground.
MAINTENANCE
Lower implement to ground, turn off tractor, and set parking brake before
doing maintenance inspections or work.
BEFORE EACH USE
- Inspect auger to be sure that no foreign objects such as wire or steel strapping bands are wrapped around it.
- Make certain driveline shields are in place and in good condition.
- Check cutting blades, point, and flighting for wear or damage. Repair or replace as necessary.
- Inspect hydraulic components for wear or leaks. Repair or replace as necessary.
- Perform BEFORE EACH USE: lubrication and check all fluid levels.
AFTER EACH USE
- Clean all debris from machine.
- LUBRICATION
BEFORE EACH USE
- Driveline Universal Joints – Apply multi-purpose grease to fittings.
- Driveline Guard – Apply 2-3 shots of multi-purpose grease to plastic fittings.
- Driveline Shaft Disconnect PTO driveline, pull two sections apart, and apply thin coat of multipurpose grease to inside of outer (female) section. Reassemble sections and install. Pull each section to be sure driveline and shields are securely connected. Make certain PTO shielding is in good condition.
- Gearbox – Add EP80W-90 gear oil as necessary to bring oil level to check plug.
ITEM | PART No. | NAME & SPECIFICATION | QTY. | MODEL |
---|---|---|---|---|
1 | HD12.00.010 | Boom,Weldment | 1 | |
2 | HD12.00.020 | Hitch Frame,Weldment | 1 | |
3 | HD12.00.101 | Pin,frame | 1 | |
4 | HD12.10.001 | Gear box | 1 | HD6/9/12/1 |
HD18.10.001 | Gear box | 1 | HD18/20 | |
5 | HD12.00.102 | Pin,Gear box | 1 | |
6 | HD12.00.040 | Safety Cover | 1 | |
7 | HD12.00.030 | Safety Cover, Auger | 1 | |
8 | HD6.00.002 | Auger, Assembly | 1 | HD6 |
HD9.00.002 | Auger, Assembly | 1 | HD9 | |
HD12.00.002 | Auger, Assembly | 1 | HD12 | |
HD14.00.002 | Auger, Assembly | 1 | HD14 | |
HD18.00.002 | Auger, Assembly | 1 | HD18 | |
HD20.00.002 | Auger, Assembly | 1 | HD20 | |
9 | LOCK PIN 12A | Lynch Pin 12 | 3 | |
10 | GB/T 91–2000–5×32 | Cotter 5×32 | 2 | |
11 | GB/T 818–2000–M8×12 | Screw M8x12 | 7 |
ITEM | PART No. | NAME & SPECIFICATION | QTY. | MODEL |
---|---|---|---|---|
1 | HD6.00.050 | Auger, Weldment | 1 | HD6 |
HD9.00.050 | Auger, Weldment | 1 | HD9 | |
HD12.00.050 | Auger, Weldment | 1 | HD12 | |
HD14.00.050 | Auger, Weldment | 1 | HD14 | |
HD18.00.050 | Auger, Weldment | 1 | HD18 | |
HD12.00.050 | Auger, Weldment | 1 | HD20 | |
2 | HD6.00.104 | Tooth 1 | 1 | HD6 |
HD9.00.104 | Tooth 1 | 1 | HD9 | |
HD12.00.104 | Tooth 1 | 1 | HD12 | |
HD14.00.104 | Tooth 1 | 1 | HD14 | |
HD18.00.104 | Tooth 1 | 1 | HD18 | |
HD20.00.104 | Tooth 1 | 1 | HD20 | |
3 | HD6.00.105 | Tooth 2 | 1 | HD6 |
HD9.00.105 | Tooth 2 | 1 | HD9 | |
HD12.00.105 | Tooth 2 | 1 | HD12 | |
HD14.00.105 | Tooth 2 | 1 | HD14 | |
HD18.00.105 | Tooth 2 | 1 | HD18 | |
HD20.00.105 | Tooth 2 | 1 | HD20 | |
4 | HD12.00.106 | Pilot Drill | 1 | |
5 | GB5782–M12×90 | Bolt M12x90 | 2 | |
6 | GB889.1–M12 | Lock Nut M12 | 2 | |
7 | GB5783–M12×30 | Bolt M12x30 | 4 | |
8 | GB93–12 | Lock Washer 12 | 4 | |
9 | GB6170–M12 | Nut 12 | 4 |
Name:
**Address: ____
City State Zip: __
Phone: __
E-mail: __**
E-mail cservice@betstco.com
Phone 541-895-3083
Model Number: ____
Serial Number: ____
Purchased From: ____
Purchase Date: ___
| Description| Qty| Price| Amount
---|---|---|---|---
| | | |
| | | |
| | | |
FARMER-HELPER Limited Warranty
Unless otherwise stated on purchase invoice, Bitstock warrants to original Purchaser that Farmer-Helper products are free from major defects in material under normal use and service for a period of 90 Days from the date the product is purchased or shipped, whichever is later. Commercial use 90 days. Use at address that is not yours, is considered commercial use. Consumable, Expendable, Wear Items (Rubber plastic parts, hydraulic hoses, belts, tires, cables, blades, tines, wedges, teeth, tips, chains, pins, brushes, filters, etc.) and cracked hydraulic pumps, bent or broken cylinder rods are not covered under this warren- ty. Warranty does not cover items that have been modified, damaged by abuse or usage not in accord- dance with design or maintenance.
Bitstock obligation under this warranty is to repair or replace defective upon
approval by; Bitstock, 83371 Melton Rd. N, Creswell OR 97426 that Warranty
Claim is valid. Product shall be returned upon request of Bitstock.
Transportation charges to be prepaid by user.
Gasoline or diesel engines used to powered Farmer-Helper products are covered
by the warranty of the appropriate engine manufacture an Purchaser must look
to the engine manufacture for all issues relating to engine operation.
Betstco assumes no responsibility for outside labor.
PERMISSABLE BY APPLICABLE LAW, BETSTCO HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, ANY IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT PURCHASED, WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BETSTCO HEREBY EXPRESSLY DISCLAIMS ALL LIABILITY FOR PRODUCT DEFECT OR FAILURE, CLAIMS THAT ARE DUE TO NORMAL WEAR, PRODUCT MISUSE, ABUSE, PRODUCT MODIFICATION, IMPROPER PROD- UCT SELECTION, NON-COMPLIANCE WITH ANY CODES, OR MISAPPROPRIATION. BETSTCO MAKES NO WARRANTIES TO THOSE DEFINED AS “CONSUMERS” IN THE MAGNUSON-MOSS WARRANTY FEDERAL TRADE COMMISION IMPROVEMENTS ACT. THE FOREGOING EXCLUSION OF IMPLIED WARRANTIES DO NOT APPLY TO THE EXTENT PROHIBITED BY LAW. PLEASE REFER TO YOUR LOCAL LAWS FOR ANY SUCH PROHIBITIONS.
THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON THE PART OF BETSTCO FOR ANY GENERAL SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SALE OR USE OF ANY PRODUCTS SOLD BY BETSTCO OR AN AGENT THEREOF, BETSTCO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY PURPOSE) WITH RESPECT TO THE PRODUCTS COVERED BY THIS AGREEMENT EXCEPT AS IN THIS PARAGRAPH OTHERWISE EXPRESSLY PROVIDED.
THIS IS THE SOLE AND ONLY WARRANTY OF VALUE-LEADER PRODUCTS, NO OTHER WARRANTY
IS APPLICABLE, EITHE EXPRESSED OR IMPLIED, IN FACT BY LAW.
This warranty shall not be interpreted to render Bitstock, or any authorized
agent liable for injury or damages of any kind or nature, direct,
consequential, or contingent, to a person or property.
The sole and only remedy in regard to any defective product shall be the repair or replacement thereof as herein provided, Bestow, agent(s) of Bitstock shall not be liable for any consequential, special, incidental or punitive damages resulting from or caused by any such defects
Bitstock reserves the rights to make improvements in design or changes in specifications at any time, without incurring any obligations to owners of the units previously sold.
WARRANTY VOID IF REGISTRATION IS NOT RECEIVED OR RECORDED ONLINE WITHIN 30
DAYS OF PURCHASE DATE OR SHIP DATE, WHICHEVER IS LATER.
ACCEPTANCE OF RESPONSIBILITY:
I (PURCHASER) HAVE READ OPERATORS MANUAL AND LIMITED WARRANTY OR SOMEONE HAS
READ/AND EXPLAINED ALL INSTRUCTIONS TO ME. I UNDERSTAND THIS WARRANTY DOES NOT
COVER ANY LABOR AND THAT ALL DISPUTES WILL BE SETTLED BY BINDING ARBITRATION.
BINDING ARBITRATION IS CONDUCTED BY THE BETTER BUSINESS BUREAU (BBB) LOCATED
AT 4004 SW KRUSE WAY PLACE ST 375 LAKE OSWEGO OR 97035 OR THE CURRENT BBB
LOCATION CLOSEST TO BETSTCO. I ACKNOWLEDGE MY LIMITED WARRANTY IS VOID IF ANY
ATTEMPT TO REPAIR OR REPLACE DEFECTIVE PARTS HAS BEEN MADE BY UNAUTHORIZED
PERSONNEL.I ACKNOWLEDGE RECEIPT OF MY OPERATORS MANUAL AND HAVE READ THE SAFE
OPERATION SECTION. I ACKNOWLEDGE UNDERSTANDING MAINTENANCE AND SAFE OPERATION
REQUIREMENTS, ITEM
SPECIFACATIONS, OPERATION, CONTROLS AND STORAGE REQUIRMENTS. I UNDERSTAND THAT
IS ALONE AM RESPONSIBLE FOR PROPER MAINTENANCE, CARE AND SAFE OPERATIONOF THIS
FARMER-HELPER ITEM I (PURCHASER) AGREE THAT PERSONS NOT FAMILIAR WITH THE
OPERATION OF THIS ITEM
SHOULD NOT BE ALLOWED TO USE IT. CHILDREN ESPECIALLY SHOULD NOT OPERATE OR BE
NEAR POWER PRODUCTS WHEN IN USE. ANYONE OPERATING VALUE-LEADER PRODUCTS SHOULD
HAVE READ OPERATIONS MANUALS AND SAFTEY MANUALS.
OWNERS Signature ____DATE:/ __/___
YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON RD, CRESWELL OR, 97426. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION ONLINE AT https://betstco.com/product-registration/. THIS WARRANTY IS NOT EFFECTIVE UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30 DAYS OF PURCHASE OR SHIP DATE WHICHEVER IS LATER.
NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY
1 YEAR EXTENDED WARRANTY & REGISTRATION FARMER-HELPER IMPLEMENTS BRANDED PRODUCTS **1 YEAR EXTENDED WARRANTY**
1 Year Extended Warranty amends to original Recorded Warranty Registration the time period of described coverage. Extended Warranty does not apply to consumable and Expendable Item as described in Product Warranty Registrar- tin.
This amendment does not affect any other part of recorded Warranty Regis- ration or policy. No one is authorized to alter, modify, or enlarge this Amendment to original recorded Warranty Registration
EXTENDED REGISTRATION & PAYMENT MUST BE RECEIVED WITHIN 30 DAYS OF PURCHASE DATE
EXTENDED WARRANTY REGISTRATION
PRODUCT & MODEL # ____
SERIAL #__
OWNER NAME :_____
BETSTCO INVOICE #_____
ACCEPTANCE OF RESPONSIBILITY:
I (PURCHASER) HAVE READ AND UNDERSTAND THE EXTENDED WARRANTY OR SOMEONE HAS
READ AND EXPLAINED ALL THE ABOVE TO ME. I UNDERSTAND THIS EXTENDED WARRANTY
DOES NOT COVER ANY LABOR. I HAVE FILED MY ORIGINAL WARRANTY REGISTRATION AND
FULLY UNDERSTAND MY REQUIREMENTS. I UNDERSTAND THAT I ALONE AM RESPONSIBLE FOR
PROPER MAINTENANCE, CARE AND SAFE OPERATION OF THIS TRACTOR IMPLEMENT.
OWNERS SIGNATURE: x ____DATE:/_/
FAX TO 1-541-895-2756
YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON RD, CRESWELL OR. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION ONLINE AT https ://betstco.com/product-registration/. THIS WARRANTY IS NOT EFFECTIVE UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30 DAYS OF PURCHASE OR SHIP DATE WHICHEVER IS LATER.
NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY