Yanzeo L1100, L1000 Series Wired 1D Barcode Scanner Instruction Manual

July 2, 2024
YANZEO

Yanzeo L1100, L1000 Series Wired 1D Barcode Scanner Instruction Manual

Dear users, thank you for choosing our products. We will serve you with high- quality products, in order to ensure that you better use this product, please read this manual carefully before use!

Introduction description

Universal handheld 1Dbarcode scanner, using the international
advanced photoelectric conversion technology, with two-way
communication instant error correction feedback, to complete a variety
of commonly used one-dimensional code reading. It can be used in
different lighting environments and has strong applicability. Read faster
and operate more efficiently.
Support paper barcode, ant-color barcode reading; Support printing
distortion, wrinkle damage and other non-standard barcode reading.
Not all of the product features are listed in this manual, so please
contact your supplier for more details. The rights used in this product,
including the right of final interpretation of this instruction manual, are
reserved by the Company (the contents of this instruction manual are
modified without nocte).

Factory reset

Allscanners have a factory defaultsetng, and reading the “Factory Reset” barcode will restore all the property settings of the scanner to the factory state:

1. The scanner setup is incorrect and the barcode cannot be
recognized.
2. You forgot the previous settings, but you don’t want to use the
previous settings anymore.
3. You set the scanner to a feature that is not commonly used aver use.
Factory reset

Check the version number

Using a scanner to scan and view version number barcodes, you can view the current product version number information, which is convenient for technicians to provide support.

Check the version number

Sound settings

The factory turns on the sound by default, and if you don’t need the sound of the scanner, you can scan the off sound.

Turn off sound

Turn on sound

Common settings
You can change the reading mode by scanning the following setup code

**Manual mode

**

Continuous mode

Terminator setting

In order to allow the host to quickly distinguish the results of the current decoding, you can turn on the add end character function, and the scanner adds the corresponding end character after decoding the data.

CR

CR+LF

TAB

No terminator

Barcode type allow/prohibit settings

Inverted color recognin is allowed

Inverse color recognin is prohibited

Communicator interface sings

When the scanner is connected to the host using a USB cable, the scanner can be configured for standard keyboard input by scanning the U SB KBW setup code.

USB-KBW

When the scanner is connected to the host using a USB cable, the scanner can be configured into a virtual serial output mode by scanning the USB COM setup code.

USB-COM

Case conversion

When the letter conversion and re-scanning gun output barcodes with letter content, the output can be configured to be full uppercase or all lowercase.

Turn off the conversion

All in uppercase

All lowercase

Conversion between uppercase and lowercase

Transfer speed

You can adjust the speed of the scanner output with the following settings

Fast transfer speed

Medium transfer speed

Slow transfer speed

Multi-language settings

The scanner is available in a variety of keyboard languages and can be set up according to your needs

American keyboard

Italy

French

German

Czech Republic

Turkish-F

Turkish-Q

**Hungary

**

Japan

Russia


Easy maintenance method:

  1. Stains and dust on the scanning window can sometimes affect the scanner’s work. When cleaning, use a good quality facial tissue and gently wipe it. Then blow it clean with a blowing balloon. If you wipe with paper with poor paper for a long time, it will damage the surface finish of the scanning window and affect the reading effect of the scanner.
  2. The scanner housing can be wiped with a clean cloth. If necessary, add a small amount of dish soap to the water and wipe it with a soft cloth dipped in water.

Maintenance regulations:

  1. From the date of purchase, within one year of normal use, if the product fails, the company is responsible for free maintenance.
  2. The start date of the warranty period is subject to the date of purchase and invoice of the product warranty card.
  3. Please present the product warranty card and invoice during maintenance.
  4. Please keep this warranty card properly, if it is lost, the date of purchase must be consistent with the invoice number, otherwise it is invalid.
  5. This card must not be altered, otherwise it will be invalid.
  6. Products that exceed the warranty period or are not free maintenance, the company’s maintenance service center is still enthusiastic to serve you.

One of the following cases is not covered by free maintenance:

  1. Products that have exceeded the warranty period.
  2. Those who cannot provide a purchase invoice or a valid certificate.
  3. The appearance is naturally old due to use, and the consumer demands an updater.
  4. Failure caused by failure to use according to the requirements of the manual.
  5. Failure caused by falling or colliding.
  6. Failure caused by self-assembly, disassembly and repair.
  7. Samples and processed products for commercial display, and products that have undergone performance overload tests.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals